| VSU 200644 Four Point Contact Slewing Ring | End plug (suffix Y):EPR 18; Pa:43.6 kN; Housing:SAF 534; P150°:77 kN; Mass pillow block:125 kg; Cap bolt recommended tightening torque:203.4 N·m; PG:1/4 NPT; S:4.763 mm; N1:28.575 mm; Labyrinth ring:2 x LOR 139; |
| RB5013 Crossed Roller Bearings | A2:155.575 mm; P180°:57.4 kN; P60°:141 kN; R2:30.163 mm; L:387.35 mm; Cap bolt recommended tightening torque:298.3 N·m; Housing:SAFS 024 KA; PG:1/4 NPT; H:222.25 mm; End plug (suffix Y):EPR 14; |
| 65 mm x 120 mm x 23 mm QY-12 Slewing Bearing | Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:251000 N; Grease Speed Rating Open/Shielded n1:950 rpm; Basic Static Radial Load Rating Co:390000 N; B:46.00 mm; Sealed Speed Rating n3:0 rpm; Oil Speed Rating Open/Shielded n2:1200 rpm; D:520.0000 mm; Accessories:Two Seals; d:420.000 mm; Size (mm):65 mm x 120 mm x 23 mm ; |
| 50 x 4.331 Inch | 110 Millimeter x 1.063 Inch | 27 Millimeter RKS.060.20.0944 Slewing Bearing Without Gear 872x1016x56mm | C:159.5 mm; Basic static load rating C0:1630 kN; H max.:84.965 mm; Maximum static radial loads F0r max.:1100 kN; r min.:2.7 mm; Basic dynamic load rating C:1080 kN; Fatigue load limit Pu:180 kN; d:130 mm; Mass bearing:66.6 kg; E:218.375 mm; Size (mm):50 x 4.331 Inch | 110 Millimeter x 1.063 Inch | 27 Millimeter ; |
| 1797/2600G2K Bearing 2600x3232.8x200mm | Fillet Radius ra:3.00 mm; Basic Radial Load Rating-Static SCO:345000 N; Basic Radial Load Rating-Dynamic DC:296000 N; d:130.000 mm; B:58.00 mm; Speed Rating-Open and Shielded-Grease OSG:5300 rpm; D:280.0000 mm; Fillet Radius rb:1.00 mm; Speed Rating-Open and Shielded-Oil OSO:7800 rpm; Type:300-RDM Series (from; |
| Komatsu PC300LC-5K Excavator Part Number 207-25-51100 Swing Bearing | Associated spanner:HN 12-13; Recommended grub screw tightening torque:8 N·m; d3:85 mm; Axial static load carrying capacity:108 kN; h:3 mm; b:7 mm; Grub (set) screw size:M6; B:15 mm; Mass lock nut:0.25 kg; B3:3 mm; |
| 78868 Slewing Bearing 340x450x30mm | Basic Dynamic Radial Load Rating:4560 lbf; Distance J:3.2500 in; Thread Diameter G:1/2-13; Dimension F:0.7500 in; Dimension L:4.1250 in; Width A:1.5000 in; Height H:3.6250 in; Insert Bearing IB:Stainless Steel; Shaft Diameter D:1 1/4 in; Dimension H1:1.8750 in; |
| 227-6099 Swing Bearing For Caterpillar 385BL ME Excavator | G:149.555 mm; Hydraulic nut:HMVC 28E; Lock nut:N 028; Mass adapter sleeve assembly:3.8 kg; Sleeve:S 3028x4.15/16; B:24.079 mm; d3 max.:165.227 mm; d1:125.412 mm; B1:84.582 mm; Threads per inch:12; |
| RB60040 Cross Roller Bearing 600x700x40mm | D:135.755 mm; Basic dynamic load rating C:353 kN; Cb min.:9.5 mm; Db min.:125 mm; Basic static load rating C0:400 kN; r1,2 min.:3.5 mm; Da max.:123.5 mm; T:53.975 mm; d1 ≈:97.5 mm; B:56.007 mm; |
| SX011840 Cross Roller Bearing 200x250x24mm | Mass needle roller and cage assembly:0.006 kg; Ew:22 mm; U:10 mm; Fw:18 mm; Fatigue load limit Pu:1.32 kN; Basic static load rating C0:11.4 kN; Limiting speed:24000 r/min; Basic dynamic load rating C:8.09 kN; Reference speed:22000 r/min; |