| No. | Brand | C | K | A | T | a | G | h | b |
| 90 | - | - | - | - | - | 20.2 mm | - | - | - |
| NU308E | - | - | - | - | - | - | - | - | - |
| 99% | - | - | - | - | - | - | - | - | - |
| NU2207ET2X | NTN | - | - | - | - | - | - | - | - |
| SL182936 | INA | - | - | - | 56 mm | - | - | - | - |
| FZR1000 | - | 15.5 mm | - | - | 20 mm | 17 mm | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 475 | - | - | - | - | - | - | - | - | - |
| 18mm, | - | - | - | - | - | - | - | 54.769 mm | - |
| 20 | - | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| #78825 | - | - | - | - | - | - | - | - | - |
| 32214 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 212140106001 | - | 46 mm | - | - | - | - | - | - | - |
| MA-1205-EL | Bower | 26 mm | - | - | - | - | - | - | - |
| 25Z246-D6 | NSK | - | - | - | - | - | - | - | - |
| GY6 | - | - | - | - | - | - | - | - | - |
| PC300 | - | - | - | - | - | - | - | - | 12 mm |
| 024.50.2800 | - | - | 12 mm | - | - | - | - | - | - |
| E34 | - | - | - | - | - | - | - | - | - |
| 8X4 | - | - | - | - | - | - | - | - | - |
| (An836) | - | - | - | - | - | - | - | - | mm |
| Factory-18mm | - | - | - | - | - | - | - | - | 5.2 mm |
| 3 | - | - | - | - | - | - | - | - | - |
| 155 | Nachi | - | - | - | - | - | - | - | - |
| 4x16x5 | - | - | - | - | - | - | - | - | - |
| RK6-25E1Z Heavy Duty Slewing Ring Bearing With External Gear | d:25 mm; Oil:17 000 min-1; Bearing designation:16005D ; D:47 mm; Dynamic (Cr):10.070 kN; da:27 min; Grease:14 000 min-1; Da:43 max; Pu:0.264 kN; rs:0.3 mm; |
| ZX120 Slewing Bearing | A1:171.45 mm; R1:115.888 mm; da:149.225 mm; S:4.763 mm; Eye bolt:2 x 3/8-16 UNC; P60°:234 kN; J1:107.95 mm; H2:69.85 mm; H1:179.375 mm; P150°:77 kN; |
| CRBC 10016 Crossed Roller Bearings 100x140x16mm Industrial Robots Arm Use | Basic Radial Load Rating-Static SCO:2400 N; Basic Interchange NDH:8500; Basic Interchange FAF:200KL; Speed Rating-Single and Double Sealed Grease SDG:17000 rpm; Fillet Radius ra:0.64 mm; Accessories:8000 One Seal; Old MRC Bearing Number:200FS; Width - Overall B:12.7 mm; d:10.000 mm; Width - Inner Ring B1:12.20 mm; |
| HD512 Slewing Bearing | dynamic Cr:384.810 kN; static Cor:970.000 kN; D1:93 mm; Oil:1 060 min-1; D:190 mm; Grease:790 min-1; H:77 mm; d:90 mm; rs (min):2.1 mm; d1:187 mm; |
| RU148UUCC0 Crossed Roller Bearing 80x165x22mm | d2:152.4 mm; L:387.35 mm; Attachment bolt diameter G:19.05 mm; s:41.275 mm; B:116.681 mm; Basic dynamic load rating C:311 kN; da:101.6 mm; S:0.794 mm; J max.:333.375 mm; J min.:304.8 mm; |
| RA13008 Crossed Roller Bearings 130x146x8mm | Oil:13 000 min-1; B:24 mm; d:25 mm; Dynamic (Cr):21.123 kN; ra:1 max; Static (Cor):10.806 kN; Grease:11 000 min-1; rs:1.1 mm; Weight:0.32 kg; Da:55 max; |
| Cross Roller Bearing XR882055 Thrust Tapered Roller Bearing 901.7x1117.6x82.555mm | B:34 mm; Locking device:MS 3052-48; d1:220 mm; G2:M 6; d:240 mm; B5:46 mm; Mass adapter sleeve assembly:11.4 kg; Hydraulic nut:HMV 48E; A:4.2 mm; d3:290 mm; |
| 45 mm x 100 mm x 25 mm 011.30.710 Slewing Bearing | Sleeve:S 48x8.15/16; d:240 mm; Mass adapter sleeve assembly:17 kg; Hydraulic nut:HMVC 48E; B5:43.129 mm; d1:227.012 mm; Lock nut:N 048; G:239.827 mm; B1:168.351 mm; Locking plate:PL 48; Size (mm):45 mm x 100 mm x 25 mm ; |
| 121.28.1120 Slewing Bearing | Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:127000 N; D:180.0000 mm; d:100.000 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; Basic Static Radial Load Rating Co:134000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; B:34.00 mm; Accessories:Without Accessories; |
| VLA301155N Four Contact Ball Slewing Ring 1005x1298x90mm | Basic Dynamic Radial Load Rating C:138000 N; d:65.000 mm; Oil Speed Rating n2:4300 rpm; B:58.70 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:3200 rpm; Basic Static Radial Load Rating Co:108000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3200 rpm; D:140.0000 mm; |
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
A6-11E4 Four Point Contact Ball Slewing Bearing With External Gears Video