| No. | Brand | C | K | A | T | a | G | h | b |
| 0.28mm | - | - | - | - | - | - | - | 36.513 mm | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| CRUISER/GX470 | koyo | - | - | - | - | - | - | - | - |
| JS220 | - | - | - | - | - | - | - | - | - |
| 23128B | - | - | - | - | - | - | - | - | - |
| F-555102.01 | - | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| PC200-8 | - | - | - | - | - | - | - | - | - |
| CM163DL-115656 | Parker | - | - | - | 21 mm | - | - | - | - |
| 8x19x6 | - | - | - | - | - | - | - | - | - |
| 1220*2440mm | INA | - | - | - | - | - | - | - | - |
| 22211 | SKF | - | - | - | - | - | - | - | - |
| NU310ET | NSK | 159.5 mm | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | 15 mm | - |
| (4)SET | - | - | - | - | - | - | - | - | 22.3 mm |
| 6204-ZZ | - | - | - | - | - | - | - | - | - |
| 30% | - | - | - | - | - | - | - | - | - |
| 3/4" | Danfoss | - | - | - | - | - | - | - | - |
| 6313 | NSK | - | - | - | - | - | - | - | - |
| SL04140-PP | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | 51 mm | - | - | - |
| K085903553 | Parker | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| PTK-10062 | - | - | - | - | - | - | - | - | - |
| 6008-2RS1C3HT51 | SKF | - | - | - | - | - | - | - | - |
| Pve21 | - | - | - | - | - | - | 159.614 mm | - | - |
| RU228UUCC0 Crossed Roller Bearing 160x295x35mm | Housing:SAW 534; P120°:85.9 kN; N1:28.575 mm; PG:1/4 NPT; Bearing:23234 CCK/W33; Cap bolt recommended tightening torque:203.4 N·m; H2:69.85 mm; Initial grease fill:878.85 g; End plug (suffix Y):EPR 18; Pa:56 kN; |
| Komatsu PC300LC-7L Excavator Part Number 207-25-61100 Swing Bearing | d:35 mm; ra max.:1.5 mm; Basic static load rating C0:63 kN; D:80 mm; Axial load factor Y:0.6; Da max.:73.4 mm; da max.:68 mm; Limiting value e:0.2; r3,4 min.:1.1 mm; Reference speed:9500 r/min; |
| RA5008 Cross Roller Bearing 50x66x8mm | Calculation factor Y0:1.8; Mass bearing:6.75 kg; d:80 mm; Calculation factor Y1:1.9; B:67 mm; K:4.5 mm; Calculation factor Y2:2.9; Calculation factor e:0.35; Basic static load rating C0:530 kN; Limiting speed:2000 r/min; |
| RB11015UU High Precision Cross Roller Ring Bearing | Limiting speed:200 r/min; Mass bearing:565 kg; s max.:14 mm; Calculation factor e:0.3; Fatigue load limit Pu:1020 kN; d:950 mm; d1 ≈:1048 mm; ra max.:6 mm; Db max.:1222 mm; D:1250 mm; |
| VU200405 Slewing Bearing Manufacturer 336x474x46mm | B:13.00 mm; Basic Dynamic Radial Load Rating C:13300 N; Oil Speed Rating Open/Shielded n2:15000 rpm; Sealed Speed Rating n3:8000 rpm; D:55.0000 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; Accessories:Seal & Snap-Ring; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:8300 N; d:30.000 mm; |
| 114.40.2800 Slewing Bearing | Calculation factor Y:0.4; Limiting speed:1700 r/min; D:215 mm; Mass bearing:9.05 kg; B:58 mm; r3,4 min.:2.1 mm; d1 ≈:150 mm; Da max.:204 mm; Calculation factor kr:0.3; Basic dynamic load rating C:512 kN; |
| XU060111 Crossed Roller Slewing Bearings 76.2x145.79x15.87mm | d:85 mm; Mass shaft washer:1.27 kg; r1,2 min.:1.5 mm; B:13.5 mm; d1:150 mm; |
| RA13008 Cross Roller Bearing 130x146x8mm | Grease Speed Rating Open/Shielded n1:8500 rpm; D:72.0000 mm; d:55.000 mm; Sealed Speed Rating n3:5180 rpm; Basic Static Radial Load Rating Co:7350 N; Fillet Radius ra:0.30 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:8320 N; Oil Speed Rating Open/Shielded n2:10000 rpm; B:9.00 mm; |
| RE50050 Cross Roller Bearings,RE50050 Bearings SIZE 500x625x50mm | J:99 mm; H:124 mm; s1:26.9 mm; A1:15 mm; A3:3.2 mm; d:25 mm; Basic static load rating C0:7.8 kN; Housing:FYTBK 505; Da:63.5 mm; Recommended tightening torque for grub screw:4 N·m; |
| VU250380 Slewing Bearing Manufacturer 275x485x55mm | Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:3800 N; Sealed Speed Rating n3:8000 rpm; d:35.000 mm; B:7.00 mm; D:47.0000 mm; Oil Speed Rating Open/Shielded n2:16000 rpm; Grease Speed Rating Open/Shielded n1:13000 rpm; Basic Dynamic Radial Load Rating C:4750 N; Accessories:Two Shields; |
40 mm x 80 mm x 18 mm A8-17E10BC Four Point Contact Ball Slewing Bearing With External Gear Video
Timken Single Row Ball Bearing 208K at Mechanidrive
Manufacturer Part Number: 208K TECHNICAL SPECIFICATIONS: 208K, Timken Single Row Ball Bearing, 40 mm Inside Diameter, Brand: Timken/Fafnir, O.D.
TIMKEN Fafnir 208K, 208PP Deep groove ball bearings
TIMKEN Fafnir 208K, 208PP Deep groove ball bearings | 40x80x Also known as : 208K. Inside Diameter: 40 mm. Outside Diameter: 80 mm. Width: 18 mm. Basic dynamic load rating: 36.2 kN
Timken (Fafnir) - 208K - Motion Industries
Timken (Fafnir) 208K. Radial/Deep Groove Ball Bearing - Round Bore, 40 mm ID, 80 mm OD, 18 mm Width, Open, Internal Clearance: C0
Timken 208K Ball Bearing, Open, No Snap Ring, Metric, 40
Timken 9110PP Ball Bearing, Double Sealed, No Snap Ring, Metric, 50 mm ID, 80 mm OD, 16 mm Width, Max RPM, 3600…. ... Timken W204PP Ball Bearing, Double Sealed, No Snap Ring, Metric, 20 mm ID, 47 mm OD, 13/16" Width, Max RPM, 1400…. ... Timken 204PP Ball Bearing, Double Sealed, No Snap
Bearing 208K (Timken) | Size and Specification | Bearings
Deep groove ball bearings 208K. Bearing number : 208K. Size (mm) : 40x80x18. Brand : Timken. Bore Diameter (mm) : 40. Outer Diameter (mm) : 80
208K - Timken CAD
Browse Part Number 208K, Fafnir® Deep Groove Ball Bearings (9100K, 200K, 300K) in the The Timken Company catalog including Part Number,Item Name
40 mm x 80 mm x 18 mm Timken 208K deep groove ball
40 mm x 80 mm x 18 mm Timken 208K de... Bearing No. 208K. Size. 40x80x18 mm. Bore Diameter. 40 mm. Outer Diameter. 80 mm. Width. 18 mm d. 40 mm. D