| No. | Brand | C | K | A | T | a | G | h | b |
| #27013 | Rexroth | - | - | - | - | - | - | - | - |
| PV092 | Parker | - | - | - | - | - | - | - | - |
| 35X72X23X19 | - | - | - | - | - | - | - | - | - |
| 7922A5SN24TRDULP3 | NSK | - | - | - | 33.338 mm | 49.436 mm | - | - | - |
| 2 | - | - | - | 114.3 mm | - | - | - | - | - |
| LRR025CLS | - | - | - | - | - | - | - | - | - |
| 43BWK03D-Y-2CA20, | NSK | - | - | - | - | - | - | - | 3.1 mm |
| 1600,ANU,AHU | INA | - | - | - | 405 mm | - | - | - | - |
| [10 | - | - | - | - | - | - | - | - | - |
| 64733-32F00-000 | - | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| 5/10/50pcs | - | - | - | - | - | - | - | - | - |
| R166-2RS/C | - | - | - | 65 mm | - | - | - | - | - |
| 10192-30-0 | - | 1200 mm | - | - | - | - | - | - | 22.3 mm |
| 6872S | Timken | - | - | - | - | - | - | - | - |
| 5X9X3 | - | - | - | - | - | - | - | 45.244 mm | - |
| 3/4 | - | - | - | - | - | - | - | 121.5 mm | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 21ply | - | - | - | - | - | - | - | - | - |
| 3196 | Timken | - | - | - | - | - | - | - | - |
| 132.40.1250 Slewing Beairng | a:5.556 mm; L:222.25 mm; Attachment bolt diameter G:4 x 19.05; A:84.138 mm; A6:28.575 mm; A5:42.069 mm; s:36.513 mm; Mass bearing unit:18.4 kg; Basic dynamic load rating C:325 kN; da:87.313 mm; |
| RK6-29P1Z Slewing Ring Bearings Flanged Cross-section | J max.:247.65 mm; L:304.8 mm; S:0.794 mm; H1:79.375 mm; Mass bearing unit:11.6 kg; H2:47.625 mm; Basic dynamic load rating C:158 kN; Limiting speed:3400 r/min; d2:111.125 mm; B:92.075 mm; |
| Slewing Bearing For Komatsu PC210-7 Excavator | Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; B:6 mm; Mass bushing:0.004 kg; D1:14 mm; D:12 mm; d:6 mm; Coefficient of friction µ min.:0.05; |
| Supply CRBH11020AUU Cross Roller Bearings,CRBH11020AUU Bearing Size110x160x20mm | d:160.000 mm; Fillet Radius rb:1.00 mm; B:96.00 mm; D:290.0000 mm; Grease Speed Rating n1:1600 rpm; Basic Static Radial Load Rating Co:670000 N; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:442000 N; Oil Speed Rating n2:2100 rpm; |
| 122.25.630 Slewing Bearing | Basic Radial Load Rating-Static SCO:2250 N; D:62.0000 mm; Adapter Sleeve AS:SNW6; Inside Diameter D:25.4000 mm; Speed Rating-Open and Shielded-Oil OSO:13000 rpm; Variant:SFFX Two Shields; Basic Radial Load Rating-Dynamic DC:4380 N; B:16.00 mm; Fillet Radius ra:1.00 mm; Speed Rating-Open and Shielded-Grease OSG:10000 rpm; |
| RB5013UU High Precision Cross Roller Ring Bearing | Calculation factor Y2:1.41; d2 ≈:37.81 mm; D1 ≈:56.37 mm; d1 ≈:46.33 mm; Reference speed:13000 r/min; rb max.:0.6 mm; Da max.:65 mm; Calculation factor X:0.67; r3,4 min.:0.6 mm; Calculation factor Y0:0.76; |
| VRT 2050A Cross Roller Table 30x50x12mm | rb max.:2 mm; da min.:82 mm; D:150 mm; Reference speed:4300 r/min; ra max.:2 mm; F:89 mm; Fatigue load limit Pu:24.5 kN; d:70 mm; Mass bearing:2.15 kg; db min.:92 mm; |
| 1797/3230GK4 Slewing Beairng | Calculation factor f2B:1.03; d:40 mm; Basic dynamic load rating C:12.4 kN; r3,4 min.:0.6 mm; Static axial stiffness, preload class A:38 N/µm; B:15 mm; Da max.:63.4 mm; r1,2 min.:1 mm; Calculation factor f2A:1; ra max.:1 mm; |
| A4-23P2A Four Point Contact Ball Slewing Bearings SLEWING RINGS | P150°:10.1 kN; Mass pillow block:5.9 kg; P180°:12.5 kN; Appropriate attachment bolt size G:0.5 in; RG:1/8 NPT; Cap bolt recommended tightening torque:61 N·m; J max.:177.8 mm; S:4.763 mm; P90°:17.3 kN; ba:24.606 mm; |
| XSU141094 Cross Roller Bearing Manufacturer 1024x1164x56mm | Rubber seating ring:RIS 208 A; C:21 mm; r1,2 min.:1 mm; B:49.2 mm; Thread grub screw G2:5/16-24 UNF; Basic static load rating C0:19 kN; s1:30.2 mm; Fatigue load limit Pu:0.8 kN; Recommended tightening torque for grub screw:6.5 N·m; Limiting speed1):2800 r/min; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
A8-22E6 Four Point Contact Ball Slewing Bearing With External Gear Video