| No. | Brand | C | K | A | T | a | G | h | b |
| 12mm | - | - | - | - | - | - | - | - | - |
| 15" | - | - | - | - | - | - | - | - | - |
| 216 | - | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| 3309 | SKF | - | - | - | - | - | - | 45.244 mm | - |
| 216 | - | - | - | - | - | - | - | - | - |
| 204 | SKF | - | - | - | - | - | - | - | - |
| 3 | INA | - | - | - | - | - | - | - | - |
| BLK3232+1170mm | thk | - | - | - | - | - | M 140x2 | - | - |
| A7VO | Rexroth | - | - | - | - | - | - | - | - |
| E311 | - | - | - | - | - | - | - | - | - |
| NN3016 | - | - | - | - | - | - | - | - | - |
| B2120070 | Rollway | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 10mm | - | - | 12 mm | - | - | - | - | - | - |
| 5mm | INA | - | - | - | 150 mm | - | - | - | - |
| 1390 | - | - | - | - | - | - | M 75x2 | 3.5 mm | 8 mm |
| 100% | - | - | - | - | - | - | - | - | - |
| 825 | - | - | - | - | - | - | - | - | - |
| 5x10x4 | - | - | - | - | 19.812 mm | 15.24 mm | - | - | - |
| 4X8 | INA | - | - | - | - | - | - | - | - |
| 2mm | - | - | - | - | - | - | - | - | - |
| NUP2316-E-TVP2 | fag | - | - | - | - | - | - | - | - |
| SOR10/244 Four Point Contact Slewing Bearing | D:62.0000 mm; Basic Dynamic Radial Load Rating C:21200 N; Basic Static Radial Load Rating Co:10800 N; Oil Speed Rating n2:14000 rpm; Fillet Radius ra:1.00 mm; B:17.00 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Accessories:Shield & Seal; Sealed Speed Rating n3:7500 rpm; d:25.000 mm; |
| 133.40.1250 Slewing Bearing | P90°:249 kN; A1:190.5 mm; S:4.763 mm; P120°:151 kN; Max. speed for Taconite seal:440 r/min; ba:78.581 mm; P60°:416 kN; Housing:SSAFS 538; Initial grease fill:1672.65 g; Eye bolt:2 x 1/2-13 UNC; |
| RE35020 Cross Roller Bearing 350x400x20mm | Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; B:29.00 mm; Sealed Speed Rating n3:4000 rpm; d:45.000 mm; Basic Dynamic Radial Load Rating C:76100 N; D:120.0000 mm; Basic Static Radial Load Rating Co:45000 N; Accessories:Shield & Seal; |
| 159424A1 Swing Bearing For CASE 9040B Excavator | B:280.99 mm; Thrust factor K:1.24; Calculation factor e:0.48; D1 ≈:385 mm; Mass bearing:135 kg; Calculation factor Y0:1.4; r1,2 min.:3.3 mm; Basic dynamic load rating C:3080 kN; Comparative axial load rating CFa:190 kN; d1 ≈:337 mm; |
| YRT395 Rotary Table Bearings (395x525x65mm) Turntable Bearing | Width A:1.8750 in; Distance J:3.5000 in; Insert Bearing IB:Stainless Steel; Weight W:2.00 lb; Dimension H1:1.9375 in; Thread Diameter G:1/2-13; Dimension L:4.7500 in; Dimension F:0.7500 in; Dimension S1:1.1875 in; Shaft Diameter D:1 1/2 in; |
| I.562.25.15.D.1 Bearings | d4 max.:30 mm; Material constant KM:330; Tightening torque bolt with internal hexagon:25 N·m; d:25 mm; α:7 °; r1 min.:0.6 mm; Size bolt with internal hexagon:M 8; d2 max.:65 mm; B:20 mm; C1 max.:17 mm; |
| 1787/1640 Slewing Beairng | Height H:6.1250 in; Dimension A1:1.3438 in; Dimension L:3.6250 in; Weight W:2.85 lb; Height T:1.8438 in; Shaft Diameter D:1 1/4 in; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:5730 lbf; Dimension A2:0.5625 in; Diameter N:0.5625 in; |
| 21P-25-K1100 Swing Bearing For Komatsu PC180NLC-6K Excavator | d1:237 mm; d:170 mm; B:16.5 mm; r1,2 min.:1.5 mm; Mass shaft washer:2.8 kg; |
| CAT320D Slewing Bearing | Pa:15.3 kN; P180°:42.7 kN; Cap bolt:2 x 3/4-10 UNC; J max.:333.375 mm; J1:60.325 mm; ba:48.419 mm; Cap bolt recommended tightening torque:515.2 N·m; P90°:62.3 kN; H1:114.3 mm; Da:180 mm; |
| 789/1350 Bearing 1350x1585x72mm | PG:1/8 NPT; Appropriate attachment bolt size G:0.625 in; Da:140 mm; N1:19.05 mm; J max.:279.4 mm; Cap bolt, SAE grade:8; Pa:14.7 kN; Bearing:22313 E; A1:88.9 mm; Mass pillow block:17 kg; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
A14-48E22 Four Point Contact Ball Slewing Bearing With External Gear Video