| CRBC 10016 Crossed Roller Bearings 100x140x16mm Industrial Robots Arm Use | Basic Radial Load Rating-Static SCO:2400 N; Basic Interchange NDH:8500; Basic Interchange FAF:200KL; Speed Rating-Single and Double Sealed Grease SDG:17000 rpm; Fillet Radius ra:0.64 mm; Accessories:8000 One Seal; Old MRC Bearing Number:200FS; Width - Overall B:12.7 mm; d:10.000 mm; Width - Inner Ring B1:12.20 mm; |
| 789/500 Slewing Bearing | P150°:105 kN; H2:60.325 mm; Cap bolt:7/8-9 UNC; Housing:SAFS 228; Stabilizing ring:SR-28-0; Pa:82.3 kN; J max.:434.975 mm; A1:149.225 mm; P180°:127 kN; A2:260.35 mm; |
| XSU141094 Cross Roller Bearings,XSU141094 Bearings SIZE 1024x1164x56mm | Mass inner ring:0.0073 kg; d:10 mm; B:12 mm; r, r1,2 min.:0.3 mm; F:14 mm; |
| 797/1060G2 Bearing 1060x1400x120mm | Mass rod end:10.5 kg; r1 min.:1 mm; C1 max.:43 mm; l4 max.:284 mm; d2 max.:162 mm; Material constant KM:330; l3 min.:80 mm; w:80 mm; G:M 56x4; l7 min.:80 mm; |
| 022.60.3550 Slewing Bearing | d1 ≈:90 mm; Fatigue load limit Pu:61 kN; Maximum dynamic radial loads Fr max.:355 kN; B:120 mm; D:165 mm; Mass bearing:14.6 kg; Maximum static radial loads F0r max.:510 kN; H max.:47.5 mm; d:70 mm; Basic dynamic load rating C:314 kN; |
| 6397/2910G Slewing Bearing | P60°:691 kN; A2:311.15 mm; Labyrinth ring:2 x LOR 166; J1:133.35 mm; S:4.763 mm; H1:241.3 mm; Initial grease fill:2749.95 g; PG:1/4 NPT; Cap bolt recommended tightening torque:4284.4 N·m; Ca:117.805 mm; |
| 797/870G2K1 Bearing 870x1180x115mm | Basic Dynamic Radial Load Rating C:135000 N; D:140.0000 mm; Basic Static Radial Load Rating Co:146000 N; d:80.000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4000 rpm; Grease Speed Rating n1:3000 rpm; B:52.00 mm; Fillet Radius rb:1.00 mm; |
| RU148UUCC0 Crossed Roller Bearing 80x165x22mm | d2:152.4 mm; L:387.35 mm; Attachment bolt diameter G:19.05 mm; s:41.275 mm; B:116.681 mm; Basic dynamic load rating C:311 kN; da:101.6 mm; S:0.794 mm; J max.:333.375 mm; J min.:304.8 mm; |
| 020.40.1800 Slewing Bearing | B:475 mm; Grease:36950 kN; D:1360 mm; with tapered bore:190 min-1; Pu:18990 kN; with cylindrical bore:150 min-1; Oil:2222.410 kN; rs (min):15 mm; Dynamic (Cr):12 mm; Static (Cor):22.3 mm; |
| A13-22P14 Four Point Contact Ball Slewing Bearings SLEWING RINGS | rs Dynamic (Cr):3 mm; with tapered bore:1228 ; Oil:2 500 min-1; Pu:72.200 kN; B:50 mm; d:140 mm; with cylindrical bore:3 000 min-1; Grease:2.350 kN; Static (Cor):163.770 kN; D:250 mm; |