No. | Brand | C | K | A | T | a | G | h | b |
KT091001 | Kaydon | - | - | - | - | - | - | - | - |
TD370W | - | - | - | - | - | - | - | - | - |
4-28x50 | - | - | - | - | - | - | - | - | - |
6000 | - | - | - | - | 53.975 mm | - | - | - | - |
AP2D25,Piston | Rexroth | - | - | - | - | - | - | - | - |
1000 | NTN | - | - | - | - | - | - | - | - |
6 | - | - | - | - | - | - | - | - | - |
SL045008-D-PP | INA | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
73312BN4UNJ0N0C111P3 | Parker | - | - | - | - | - | - | - | - |
x201 | - | - | 4.5 mm | - | 54 mm | - | - | - | - |
10pcs | - | 20 mm | - | - | - | - | - | - | - |
(18-46-0) | - | - | - | 345 mm | - | - | - | - | - |
100% | INA | - | - | - | - | - | - | 79.375 mm | - |
1 | Kaydon | - | - | - | - | - | - | - | - |
+020 | - | - | - | - | - | - | - | - | - |
6220 | NSK | - | - | 89.694 mm | - | - | - | - | - |
MCP03 | YUKEN | - | - | - | - | - | - | - | - |
Mk4 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
As6669 | - | - | - | - | - | - | - | - | - |
206-25-71101 Swing Bearing For Komatsu PC240NLC-8K Excavator | Reference speed:530 r/min; Basic static load rating C0:16600 kN; Limiting value e:0.3; da max.:658 mm; Axial load factor Y:0.4; db min.:674 mm; F:664 mm; r1,2 min.:9.5 mm; Mass bearing:1086 kg; Basic dynamic load rating C:9900 kN; |
RKS.161.14.0544 Cross Roller Slewing Bearing With External Gear | Basic Dynamic Radial Load Rating C:35800 N; Fillet Radius ra:1.50 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:7700 rpm; Basic Static Radial Load Rating Co:23600 N; Oil Speed Rating Open/Shielded n2:9400 rpm; d:25.000 mm; B:21.00 mm; D:80.0000 mm; |
RE8016 Crossed Roller Bearings 80x120x16mm | Cap bolt:2 x 3/4-10 UNC; da:88.9 mm; R2:30.163 mm; Cap bolt recommended tightening torque:203.4 N·m; J1:60.325 mm; N1:22.225 mm; A2:153.194 mm; Da:180 mm; Cap bolt, SAE grade:5; J max.:333.375 mm; |
9O-1B20-0223-0574 Four Point Contact Ball Slewing Ring | Mass bearing unit:1.05 kg; Da:93.7 mm; A:32.5 mm; Db2:84 mm; Thread grub screw G2:M6x0.75; Limiting speed:1200 r/min; Db1:76 mm; Fatigue load limit Pu:0.475 kN; Basic static load rating C0:11.2 kN; End cover:ECY 206; |
014.60.2500 Slewing Bearing | C1 max.:22 mm; Mass rod end:1.4 kg; l3 min.:60 mm; Basic dynamic load rating C:80 kN; l4 max.:174 mm; d4 ≈:49 mm; α:6 °; d:35 mm; l5 ≈:25 mm; dk:47 mm; |
VSI 201094-N Four Point Contact Slewing Ring | Taconite seal (dc shaft position):TER 106; L:387.35 mm; R2:30.163 mm; Lock nut:AN 20; db:114.3 mm; ba:52.388 mm; A2:219.075 mm; J max.:333.375 mm; J1:60.325 mm; P120°:39.1 kN; |
40 mm x 75 mm x 37 mm 012.60.2500 Slewing Bearing | Locking device:MS 31/800-750; Hydraulic nut:HMV 160E; B:112 mm; Mass adapter sleeve assembly:520 kg; G2:G 1/8; d3:1000 mm; G:Tr 800x7; B5:141 mm; G3:13 mm; B1:505 mm; Size (mm):40 mm x 75 mm x 37 mm ; |
VLA200544N Slewing Bearings (434x640.3x56mm) Turntable Bearing | Cap bolt, size:M 36x240; ba min.:179 mm; P180°:3200 kN; bc:208.5 mm; N:50 mm; Ca:214 mm; P90°:3900 kN; d2:547 mm; ATS:410 mm; Q180°:2100 kN; |
024.25.710 Slewing Bearing | r1,2 min.:1.1 mm; d:50 mm; Mass shaft washer:0.37 kg; B:9.5 mm; d1:95 mm; |
11-50 2130/2-06410 Four-point Contact Ball Slewing Bearing With External Gear | Tolerance housing:H7; Tolerance shaft:e7; B:140 mm; α:124 °; Coefficient of friction µ min.:0.08; Mass bushing:10.1 kg; h:252.5 mm; Specific dynamic load factor K:25 N/mm²; d:250 mm; a:7 mm; |
A14-25P1 Four Point Contact Ball Slewing Bearings SLEWING RINGS Video