| RA20013UU High Precision Cross Roller Ring Bearing | Basic static load rating C0:93 kN; Ew:81 mm; Reference speed:5600 r/min; Limiting speed:6300 r/min; Fw:75 mm; Basic dynamic load rating C:35.8 kN; U:20 mm; Fatigue load limit Pu:11.6 kN; Mass needle roller and cage assembly:0.079 kg; |
| 020.25.630 Slewing Bearing | PG:1/4 NPT; H2:44.45 mm; Adapter sleeve assembly:SNW 20x3.5/16; Initial grease fill:181.44 g; N1:22.225 mm; Labyrinth ring:2 x LOR 100; Stabilizing ring:SR-20-17; P120°:64.9 kN; P90°:105 kN; Cap bolt:5/8-11 UNC; |
| 797/2500G21 Bearing 2500x2980x180mm | Basic Dynamic Radial Load Rating C:494000 N; Fillet Radius ra:2.50 mm; B:96.00 mm; D:290.0000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1700 rpm; Basic Static Radial Load Rating Co:735000 N; d:160.000 mm; Oil Speed Rating n2:2000 rpm; |
| RE8016 Crossed Roller Bearings 80x120x16mm | Cap bolt:2 x 3/4-10 UNC; da:88.9 mm; R2:30.163 mm; Cap bolt recommended tightening torque:203.4 N·m; J1:60.325 mm; N1:22.225 mm; A2:153.194 mm; Da:180 mm; Cap bolt, SAE grade:5; J max.:333.375 mm; |
| 797/1776G2 Bearing 1776x2210x135mm | H1:200.025 mm; PG:1/4 NPT; P90°:249 kN; h:57.15 mm; Ca:101.803 mm; H:400.05 mm; P60°:416 kN; Max. speed for Taconite seal:385 r/min; P150°:136 kN; A2:339.725 mm; |
| 130.45.2800 Slewing Bearing | d3:260 mm; G:Tr 220x4; Lock washer / Locking clip:MS 3044; d2:229 mm; B:30 mm; B3:5 mm; h:9 mm; d1:237 mm; Mass lock nut:2.5 kg; b:20 mm; |
| RKS.921150303001 Cross Roller Slewing Bearing | Permissible sliding velocity v min.:0 m/s; a:3 mm; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.08; d:40 mm; Specific static load factor K0:45 N/mm²; h:41 mm; D:50 mm; B:80 mm; Tolerance shaft:e7; |
| 2425U262F1 Swing Bearing For KOBELCO SK270LC IV Excavator | Adapter sleeve assembly:SNW 3034x5.13/16; PG:1/4 NPT; H:298.45 mm; P180°:127 kN; Cap bolt recommended tightening torque:813.5 N·m; da:147.637 mm; H1:152.4 mm; Ca:86.614 mm; Bearing:23034 CCK/W33; H2:60.325 mm; |
| RU85 Cross Roller Bearing 55x120x15mm | B:32 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Sealing solution:Triple-lip seals; Specific static load factor K0:500 N/mm²; M:3 mm; Lubricant:Regular relubricatio; b1:4.6 mm; ra max.:0.6 mm; D:68 mm; r1 min.:0.6 mm; |
| PC300-6 Slewing Bearing | Calculation factor f2C:1.05; Calculation factor f1:1; Calculation factor fHC:1; Preload class A GA:92 N; d2:70.6 mm; Db max.:90.8 mm; ra max.:1 mm; Ball diameter Dw:7.938 mm; db min.:66 mm; Calculation factor f2B:1.03; |