| No. | Brand | C | K | A | T | a | G | h | b |
| 6213 | NTN | - | - | - | - | - | - | - | - |
| 32907JR-3 | koyo | - | - | - | - | - | - | - | - |
| SQP432,SQP431,SQP421,SQP411,SQP321,SQP311,SQP211 | TOKIMEC | - | - | - | - | - | - | - | - |
| 24v | - | - | - | - | - | - | - | - | - |
| 90R055 | - | - | - | - | 360 mm | - | - | - | - |
| 61916 | INA | - | - | - | 23.812 mm | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | 51.594 mm | - |
| +0.25mm | - | - | - | - | - | - | - | - | - |
| NN3016 | - | - | - | - | - | - | - | - | - |
| 3-7.8mm | - | - | - | - | - | - | - | - | - |
| 11 | INA | - | - | - | - | - | - | - | - |
| 3 | INA | - | - | - | - | - | - | - | - |
| 10 | Parker | - | - | - | - | - | - | - | 14 mm |
| 6mm | - | - | - | - | - | - | - | - | - |
| 18 | - | - | - | 8 mm | - | - | Tr 750x7 | - | - |
| 72400 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| TFR55 | - | - | - | - | - | - | - | - | - |
| FABRIC-250 | - | - | - | - | - | - | - | - | - |
| 3585 | Timken | - | - | - | - | - | - | - | - |
| "91001-168-004" | INA | - | - | - | - | - | - | - | 7.7 mm |
| CRUISER/GX470 | koyo | - | - | - | - | - | - | - | - |
| County,California,CA,HABS,1 | Parker | - | 3 mm | - | - | - | - | - | 6 mm |
| CRBA15025 Crossed Roller Bearing (150x210x25mm) Precision Rotary Tables Use | Basic static load rating C0:2700 kN; Da min.:405 mm; Limiting speed:1200 r/min; a:80 mm; Basic dynamic load rating C:1363 kN; B:85.725 mm; Calculation factor Y0:1; r3,4 min.:3.3 mm; db min.:339 mm; T:85.725 mm; |
| 1787/874G2K Slewing Beairng | Grease Speed Rating n1:2600 rpm; d:75.000 mm; Basic Static Radial Load Rating Co:140000 N; Basic Dynamic Radial Load Rating C:168000 N; D:160.0000 mm; Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Accessories:Two Shields & Snap-R; B:68.30 mm; Fillet Radius ra:2.00 mm; |
| L6-16P9ZD Four-point Contact Ball Slewing Bearings | Hydraulic nut:HMV 170 E; d:800 mm; Nut for removal:HM 30/850; G:Tr 850x7; G2:G 1/4; G1:50 mm; Mass withdrawal sleeve:204 kg; B1:308 mm; B2:326 mm; A:15 mm; |
| RB13015UUC0 High Precision Cross Roller Ring Bearing | H2:85.725 mm; Housing:SAFS 048 KA; H:419.1 mm; P150°:185 kN; P180°:222 kN; P60°:557 kN; H1:209.55 mm; R2:42.862 mm; End plug (suffix Y):X-5217-4; P90°:334 kN; |
| China Wind Power Slewing Bearing 013.40.2720.03 Wind Turbine Slewing Bearing | Shaft C/L Distance F:1 27/32 in; Frame Size A:4 41/64 in; Bolt Pattern C:0.55 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Frame Size B:9 in; Travel:3; Bolt Pattern D:2 3/4 in; Height G:3.438 in; Bolt Pattern E:7 1/2 in; |
| ZP2 Slewing Bearing | s:36.513 mm; L:330.2 mm; B:102.394 mm; Mass bearing unit:14.3 kg; S:0.794 mm; d2:130.175 mm; H2:57.15 mm; A:80.963 mm; H1:95.25 mm; Basic dynamic load rating C:253 kN; |
| Produce CRB40040 Crossed Roller Bearing,CRB40040 Bearing Size 400X510X40mm | B:22.479 mm; G:129.692 mm; Threads per inch:12; Lock nut:AN 26; Sleeve:S 126x4.3/8; B1:126.289 mm; d3 max.:171.577 mm; Hydraulic nut:HMVC 26E; d1:111.125 mm; Mass adapter sleeve assembly:5.65 kg; |
| 231.20.0900.503 Four Contact Ball Slewing Ring 834x1046x56mm | P120°:249 kN; P90°:400 kN; Eye bolt:2 x 1/2-13 UNC; Taconite seal:TER 666; da:184.15 mm; Pa:82.7 kN; Housing:SSAFS 640; h:87.313 mm; Cap bolt, SAE grade:8; ba:103.188 mm; |
| CRB60070UU High Precision Cross Roller Ring Bearing | Sealing solution:Triple-lip seals; da max.:94.2 mm; B:72.238 mm; ra max.:0.6 mm; Specific static load factor K0:300 N/mm²; α:6 °; C:61.9 mm; Basic static load rating C0:1760 kN; M:6.5 mm; D:130.175 mm; |
| Supply CRBH20025AUU Cross Roller Bearings,CRBH20025AUU Bearing Size200x260x25mm | Sealed Speed Rating n3:2400 rpm; Grease Speed Rating n1:2400 rpm; Oil Speed Rating n2:3400 rpm; d:80.000 mm; Basic Dynamic Radial Load Rating C:201000 N; B:68.30 mm; Accessories:One Seal & Snap-Ring; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:236000 N; D:170.0000 mm; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
A12-125P1 Four Point Contact Ball Slewing Bearings SLEWING RINGS Video