| No. | Brand | C | K | A | T | a | G | h | b |
| 6213 | NTN | - | - | - | - | - | - | - | - |
| 0.3-0.5mm | - | - | - | - | - | - | - | - | - |
| 2MM204WICRDUL | FAFNIR | - | - | - | - | - | - | - | - |
| 24973-66HT0-000 | - | - | - | - | - | - | - | - | - |
| 5178 | - | - | - | - | - | - | - | - | - |
| 7414 | - | - | - | - | - | - | - | - | - |
| 4JJ1 | - | - | - | - | - | - | - | - | - |
| 21320 | koyo | - | - | - | - | - | - | - | - |
| Kubotau20 | - | - | - | - | - | - | - | - | - |
| S6VvV | - | 160 mm | - | - | - | 218 mm | - | - | - |
| 404 | - | - | - | - | - | - | - | - | - |
| 6308 | koyo | - | - | - | - | - | - | - | - |
| A6 | - | - | - | - | - | - | - | - | - |
| 13AT605H718 | - | - | - | - | - | - | - | - | - |
| 2-Jaw | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | 9 mm |
| 6213ZZC3 | NTN | - | - | - | 33.338 mm | 32.002 mm | - | - | - |
| (2) | Nachi | - | - | - | - | - | - | 46.831 mm | - |
| FXWG219E, | Rexnord | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 155 | Nachi | - | - | - | - | - | - | - | - |
| R2 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | 10 mm | - | 128 mm | - | - | - | - |
| Mhd112c024npoln | Rexroth | - | - | - | - | - | - | - | - |
| 3 | INA | - | - | - | - | - | - | - | - |
| 6003ZRC3 | SKF | - | - | - | - | - | - | - | - |
| 12'x28'x8' | - | - | - | - | - | - | - | 31.75 mm | - |
| 23156CC/W33 | - | - | - | - | - | - | - | - | - |
| 5205AZC3 | SKF | - | - | - | - | - | - | - | - |
| 231.20.0900.013 Four Contact Ball Slewing Ring 834x1046x56mm | C:27 mm; Static (Coa):203 kN; Dynamic (Ca):155 kN; rs (min):2 mm; r2s (min):0.6 mm; r1s (min):1.5 mm; D:125 mm; d2:70 mm; a:29 mm; T:33.25 mm; |
| Slewing Ring For Excavator HITACHI EX220-2, Part Number:9154037 | D:72.0000 mm; Basic Static Radial Load Rating Co:29000 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6300 rpm; Basic Dynamic Radial Load Rating C:41600 N; Accessories:Shield & Seal; B:30.20 mm; Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Oil Speed Rating n2:8500 rpm; |
| 112.50.4000 Slewing Bearing | a:22.1 mm; r1,2 min.:1 mm; Calculation factor f2B:1.02; d2:54.2 mm; Fatigue load limit Pu:0.9 kN; Calculation factor (back-to-back, face-to-face) Y1:0.92; Static axial stiffness, preload class C:254 N/µm; rb max.:0.3 mm; d:45 mm; Da max.:70.4 mm; |
| 91-20 0311/1-07102 Four-point Contact Ball Slewing Bearing With External Gear | Bearing designation:PLC 512-47 ; Static (Cor):8313 ; D:800 mm; B:230 mm; d:560 mm; Dynamic (Cr):3507 kN; Weight:320 ; B1:150 mm; Pu:570.420 kg; |
| 11-32 0957/2-05549 Four-point Contact Ball Slewing Bearing With External Gear | Grease Speed Rating Open/Shielded n1:12000 rpm; Fillet Radius ra:1.00 mm; D:47.0000 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:14200 N; Basic Static Radial Load Rating Co:8500 N; Oil Speed Rating Open/Shielded n2:15000 rpm; B:14.00 mm; Accessories:One Shield & Snap-Ri; |
| RU 124 Crossed Roller Bearing 80x165x22mm | Calculation factor kr:0.025; ra max.:2 mm; B:28 mm; b:3.1 mm; Calculation factor f0:14.7; Basic static load rating C0:64 kN; d1 ≈:106.05 mm; C:4.9 mm; D2 ≈:134.3 mm; Fatigue load limit Pu:2.5 kN; |
| XSA141094N Crossed Roller Slewing Ring Slewing Bearing | Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3600 rpm; d:110.000 mm; Basic Dynamic Radial Load Rating C:88400 N; D:200.0000 mm; Basic Static Radial Load Rating Co:39000 N; B:38.00 mm; Grease Speed Rating n1:3000 rpm; |
| CRB700150UU High Precision Cross Roller Ring Bearing | Mass withdrawal sleeve:0.91 kg; Nut for removal:KM 28; Hydraulic nut:HMV 28 E; d1:125 mm; B1:67 mm; G:M 140x2; B2:71 mm; G1:14 mm; d:130 mm; |
| 792/1280G2 Bearing 1280x1600x175mm | Oil Speed Rating n2:56000 rpm; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; B:13.00 mm; D:42.0000 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:12100 N; Grease Speed Rating n1:39000 rpm; Basic Static Radial Load Rating Co:6550 N; |
| E.950.20.00.C Four Contact Ball Slewing Ring 734x950.4x56mm | r1,2 min.:0.3 mm; Da:29.5 mm; D:35 mm; E:29 mm; C:26 mm; Db:25.6 mm; Basic static load rating C0:37.5 kN; ra max.:0.3 mm; da:28.4 mm; Limiting speed:18000 r/min; |
R210-3 Bearings Video