No. | Brand | C | K | A | T | a | G | h | b |
23128B | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
32009X2 | - | - | - | 9 mm | - | - | Tr 380x5 | - | - |
880 | - | - | - | - | - | - | - | - | - |
AP2D25LV1RS7 | - | - | - | - | - | - | - | - | - |
4510BD20AAAE53 | Parker | - | - | - | - | - | - | - | - |
23026-E1A-M | fag | - | - | - | - | - | - | - | - |
6214 | - | - | - | - | - | - | - | - | - |
ZDR6DA2-43/25y | Rexroth | - | - | - | - | - | - | 60.325 mm | - |
8-30 | - | - | - | - | - | - | - | - | - |
6203-2RS | - | - | - | - | - | - | - | - | - |
pcl-200-18b | Nachi | - | - | - | - | - | - | - | - |
TS185K | NTN | - | - | - | - | - | - | - | - |
1200*1000*1000mm | - | - | - | - | - | - | - | - | - |
1996-2000 | - | 13 mm | - | - | - | - | - | - | - |
510018 | Timken | - | - | - | - | - | - | - | - |
62209 | - | - | - | - | - | - | - | - | - |
4X8 | - | - | - | - | - | - | - | - | - |
3mm/4mm | - | - | - | - | - | - | - | 50.8 mm | - |
3000W | - | - | 9 mm | - | - | - | - | - | - |
4X8 | - | - | - | - | - | - | 179.476 mm | - | - |
380KBD031 | Nachi | - | - | - | - | - | - | - | - |
RB12025UU High Precision Cross Roller Ring Bearing | Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; D:12 mm; Tolerance shaft:e7; B:12 mm; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:0.008 kg; d:7 mm; |
KLK 950N Four Point Contact Ball Slewing Turntable Bearing | d:30 mm; G:M 30x1.5; B:10.5 mm; d3:45 mm; Mass adapter sleeve assembly:0.11 kg; d1:25 mm; B1:31 mm; Lock nut:KMFE 6; |
131.32.1000 Slewing Bearing | H:398.462 mm; da:174.625 mm; Cap bolt, SAE grade:8; Bearing:22238 CCK/W33; P120°:151 kN; P90°:249 kN; J1:114.3 mm; Initial grease fill:1672.65 g; Cap bolt recommended tightening torque:1735.4 N·m; Adapter sleeve assembly:SNW 38x6.7/8; |
010/011/013.25.315 Slewing Bearing | B4:14.173 mm; Lock washer:W 10; Mass adapter sleeve assembly:0.39 kg; d:55 mm; G:49.962 mm; Hydraulic nut:HMVC 10E; B:12.954 mm; Lock nut:N 10; d1:44.45 mm; Sleeve:S 110x1.3/4; |
YRT325 Rotary Table Bearing 325x450x60mm | Fillet Radius ra:3.00 mm; Oil Speed Rating n2:2200 rpm; Basic Static Radial Load Rating Co:550000 N; Basic Dynamic Radial Load Rating C:449000 N; D:265.0000 mm; Grease Speed Rating n1:1600 rpm; d:100.000 mm; Fillet Radius rb:1.00 mm; B:120.00 mm; |
CRBH3010 Cross Roller Bearing 30x55x10mm | Basic Static Radial Load Rating Co:13400 N; Grease Speed Rating n1:9000 rpm; B:17.00 mm; Oil Speed Rating n2:13000 rpm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:24200 N; d:25.000 mm; Fillet Radius ra:1.00 mm; |
EX200-1 Slewing Bearing | Oil Speed Rating n2:3900 rpm; Basic Static Radial Load Rating Co:137000 N; Grease Speed Rating n1:3000 rpm; d:105.000 mm; Basic Dynamic Radial Load Rating C:148000 N; Fillet Radius ra:2.00 mm; B:36.00 mm; D:190.0000 mm; |
RB9016 Crossed Roller Bearings 90*130*16mm | Basic Dynamic Radial Load Rating C:10600 N; Grease Speed Rating n1:15000 rpm; Fillet Radius ra:0.64 mm; B:19.1 mm; Accessories:One Seal; D:35.0000 mm; d:10.000 mm; Oil Speed Rating n2:20000 rpm; Sealed Speed Rating n3:15000 rpm; Basic Static Radial Load Rating Co:6100 N; |
VSU200844 Slewing Bearings M-anufacturer 772x916x56mm | Da:259.999 mm; Cap bolt, SAE grade:5; P60°:249 kN; Housing:SAF 034 KA; R2:38.1 mm; P150°:85.9 kN; H2:60.325 mm; Eye bolt:3/8-16 UNC; Pa:34 kN; J max.:441.325 mm; |
MTO-265 Slewing Bearings(265x420x50mm) (10.433x16.535x1.968inch) Without Gear | Oil Speed Rating n2:2900 rpm; Basic Dynamic Radial Load Rating C:221000 N; Grease Speed Rating n1:2400 rpm; Fillet Radius ra:2.00 mm; B:66.00 mm; Fillet Radius rb:1.00 mm; d:140.000 mm; D:210.0000 mm; Basic Static Radial Load Rating Co:305000 N; |
SR20/414 Bearing Video