| No. | Brand | C | K | A | T | a | G | h | b |
| EX200-2 | - | - | - | - | - | - | - | 60.325 mm | - |
| 125 | - | 27 mm | - | - | - | 27 mm | - | - | - |
| 30TAC62BSUC10PN7B | NSK | - | - | - | - | - | - | - | - |
| 47MWZ | - | - | - | - | - | - | - | - | - |
| 2x | John Deere | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 6313Z | fag | - | - | - | - | - | - | 38.1 mm | - |
| 2x | TRW | - | 4.5 mm | - | - | - | - | - | 8.3 mm |
| 250 | fag | - | - | - | - | - | - | - | - |
| 1972-1974 | Timken | - | - | - | - | - | - | - | - |
| A4VG180 | Rexroth | - | - | - | - | - | - | - | - |
| JS-G06-4CP-75-CLEX | DAIKIN | - | - | - | - | - | M 90x2 | - | - |
| 24954-59J30-000 | - | - | - | - | - | - | - | - | - |
| 3041DSTN | koyo | - | - | - | - | - | - | - | 22.3 mm |
| 1.25MCY14-1B.2.5MCY14-1B.5MCY | - | - | - | - | - | - | - | 42.862 mm | - |
| 7228-BCBM | FAFNIR | - | - | - | - | - | - | 50.8 mm | - |
| FAN54301 | - | - | - | - | - | - | - | - | - |
| UCFS320 | NSK | - | - | - | - | - | - | - | - |
| 42CrMo4 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 320x440x90 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 08113-60017-000 | - | - | 12 mm | - | - | - | - | - | - |
| RB25025 Cross Roller Bearing 250x310x25mm | D1 ≈:410 mm; Basic dynamic load rating C:2900 kN; d2 ≈:338 mm; r1,2 min.:4 mm; Misalignment factor k1:0.105; Da min.:396 mm; Reference speed:900 r/min; da min.:315 mm; B:160 mm; Mass bearing:95.5 kg; |
| CRBS508AUUT1 High Precision Cross Roller Bearing | A1:120.65 mm; P150°:87.2 kN; P90°:149 kN; da:103.188 mm; Initial grease fill:379.89 g; Max. speed for Taconite seal:725 r/min; Housing:SSAFS 524; Mass pillow block:64 kg; h:46.831 mm; Cap bolt, SAE grade:8; |
| CRBH258 Cross Roller Bearing 25x41x8mm | D:160.0000 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:212000 N; Basic Static Radial Load Rating Co:212000 N; B:74.00 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3800 rpm; d:75.000 mm; |
| 227-6081 Swing Bearing For Caterpillar 320C Excavator | Dimension B:5.4375 in; Weight W:1.00 lb; Dimension F:0.5000 in; Width A:1.0625 in; Dimension N:0.3906 in; Distance J:1.8750 in; Dimension C:2.0625 in; Dimension S1:0.8750 in; Diameter G:0.4063 in; Basic Dynamic Radial Load Rating:4380 lbf; |
| 789/665 Slewing Bearing | Minimum axial load factor A:2.509; Da max.:168 mm; Mass bearing:35.4 kg; Limiting speed:1000 r/min; Reference speed:500 r/min; r1,2 min.:4 mm; H:90 mm; D:300 mm; B:30 mm; Fatigue load limit Pu:480 kN; |
| RA15008 Crossed Roller Bearing 150x166x8mm | Oil Speed Rating Open/Shielded n2:4300 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2400 rpm; d:95.000 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; Basic Dynamic Radial Load Rating C:108000 N; D:170.0000 mm; Grease Speed Rating n1:3600 rpm; B:32.00 mm; Accessories:Two Seals; |
| 797/600G2 Bearing 600x900x125mm | RG:3/8 NPT; J max.:333.375 mm; H2:44.45 mm; End plug (suffix Y):EPR 10; Da:180 mm; H1:114.3 mm; L:387.35 mm; da:76.2 mm; ba:52.388 mm; Stabilizing ring:2 x SR-1617; |
| MTO-265T Slewing Bearings(265x420x50mm) (10.433x16.535x1.968inch) Without Gear | l2 max.:107 mm; r1 min.:0.3 mm; Basic static load rating C0:42.5 kN; Material constant KM:330; h:78 mm; d:20 mm; d2 max.:54 mm; l1 min.:43 mm; B:16 mm; C1 max.:13.5 mm; |
| RB12016UUCC0 High Precision Cross Roller Ring Bearing | Reference speed:16000 r/min; d3:58 mm; B1:36 mm; Calculation factor kr:0.045; r1,2 min.:1.1 mm; ra max.:1.1 mm; Fatigue load limit Pu:0.51 kN; Calculation factor Y0:2.5; Da max.:73 mm; da max.:52 mm; |
| 131.40.1250 Slewing Bearing | Fw:50 mm; U:13.5 mm; Limiting speed:9500 r/min; Basic static load rating C0:36.5 kN; Ew:55 mm; Mass needle roller and cage assembly:0.03 kg; Fatigue load limit Pu:4.3 kN; Basic dynamic load rating C:17.6 kN; Reference speed:8500 r/min; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
R450-7 Bearings Video