| No. | Brand | C | K | A | T | a | G | h | b |
| 6306RC3E | NSK | - | - | - | - | - | - | 10.1 mm | - |
| P3105L00C1C20PA00D00S1A1P/312, | Parker | - | - | - | - | - | - | - | - |
| ZH02 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| (ACF8904) | - | - | - | - | - | - | - | - | - |
| 6mm | INA | - | - | - | - | - | - | - | - |
| 6204 | Nachi | - | - | - | - | - | M 150x2 | - | - |
| (YD-004) | - | - | 4 mm | - | - | - | - | - | - |
| A11vlo260 | - | - | - | - | - | - | - | - | - |
| A-A1935 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 8B663H-20 | - | - | - | - | - | - | - | - | - |
| 24v | - | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | 51.594 mm | - |
| 6901-2RS | - | - | - | - | - | - | - | - | - |
| 91-01 | - | - | - | - | - | - | - | - | - |
| (1220X2440mm) | - | - | - | - | - | - | - | - | - |
| 7650 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 5mm-50mm | - | - | - | - | - | - | - | - | - |
| PC60 | Komatsu | - | - | - | - | - | - | - | - |
| 6700ZZ-6706ZZ | - | - | - | - | - | - | - | - | - |
| NLS-JH75 | - | - | - | - | - | - | - | - | - |
| 32% | - | - | - | - | - | - | - | - | - |
| 3329 | Timken | - | - | - | - | - | - | - | - |
| 1390 | - | - | - | - | - | - | M 75x2 | 3.5 mm | 8 mm |
| 626 | - | 33 mm | - | - | 42.25 mm | 33 mm | - | - | - |
| 3/4 | - | - | - | - | - | - | - | 121.5 mm | - |
| 2787/1440G2 Slewing Bearing | Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; Basic static load rating C0:245 kN; l7 min.:58 mm; C1 max.:31 mm; dk:66 mm; l1 min.:110 mm; d:50 mm; B:35 mm; Mass rod end:3.9 kg; |
| Cross Roller Bearing XR882054 Thrust Tapered Roller Bearing 901.7x1117.6x82.555mm | |
| 010.40.1120 Slewing Bearing | s:1.4 mm; Static (Coa):10.2 kN; rs (min):1 mm; d2:20 mm; Pu:1.240 kN; d2 (max):30 mm; r1s (min):0.6 mm; D:47 mm; Dynamic (Ca):13.9 kN; b:3 mm; |
| 134.50.550 Slewing Bearing | r, r1,2 min.:1.1 mm; B:40 mm; d:160 mm; Mass inner ring:1.2 kg; F:175 mm; |
| 21P-25-K1100 Swing Bearing For Komatsu PC180NLC-6K Excavator | d1:237 mm; d:170 mm; B:16.5 mm; r1,2 min.:1.5 mm; Mass shaft washer:2.8 kg; |
| A8-25N2 Four Point Contact Ball Slewing Bearing With Inernal Gear | h:31.75 mm; Initial grease fill:136.08 g; N1:15.875 mm; H1:82.55 mm; H2:28.575 mm; Ca:37.008 mm; PG:1/8 NPT; P180°:22.2 kN; R2:21.431 mm; P120°:20 kN; |
| R11-71E3 Crossed Roller Slewing Rings With External Gear | Calculation factor kr:0.083; Limiting speed:900 r/min; Calculation factor Y2:0.87; Reference speed:850 r/min; a:186 mm; Fatigue load limit Pu:23.6 kN; d1 ≈:590 mm; Calculation factor Y0:0.38; D:710 mm; da min.:558 mm; |
| XU080120 Crossed Roller Slewing Bearings 69x170x30mm | Pu:46 kN; Dynamic (Cr):mm; with cylindrical bore:8 500 min-1; Oil:5.620 kN; Static (Cor):mm; with tapered bore:11 000 min-1; D:52 mm; d:25 mm; rs (min):1 mm; Grease:46.1 kN; |
| L6-22N9Z Four-point Contact Ball Slewing Rings With Internal Gear | da max.:250 mm; Mass bearing + sleeve:30 kg; Basic dynamic load rating C:1120 kN; D1 ≈:285 mm; D:310 mm; Limiting speed:2400 r/min; Da max.:299 mm; Basic static load rating C0:1730 kN; B1:120 mm; ra max.:2 mm; |
| RU85 Cross Roller Bearings,RU85 Bearing SIZE55X120X15mm | Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:20800 N; Grease Speed Rating Open/Shielded n1:4500 rpm; D:130.0000 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:23600 N; d:105.000 mm; B:13.00 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating Open/Shielded n2:5300 rpm; |
YC85 Slewing Bearing Video