| NRXT25030 Crossed Roller Bearing 250x330x30mm | Reference speed:4000 r/min; da max.:87 mm; T:27.25 mm; Calculation factor e:0.43; C:22 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:171 kN; Mass bearing:1.38 kg; Da min.:115 mm; r1,2 min.:2 mm; |
| 123.25.630 Slewing Bearing | Grease:10950 kN; Static (Cor):22.3 mm; with cylindrical bore:320 min-1; with tapered bore:380 min-1; d:460 mm; Dynamic (Cr):12 mm; D:760 mm; Pu:5720 kN; rs (min):7.5 mm; B:240 mm; |
| 227-6087 Swing Bearing For Caterpillar 325CL Excavator | Initial grease fill:382.73 g; da:133.35 mm; R1:79.375 mm; ba:56.356 mm; Mass pillow block:67.6 kg; L:466.725 mm; RG:1/2 NPT; PG:1/4 NPT; P150°:68.1 kN; Cap bolt:2 x 1-8 UNC; |
| VLI200744N ZT Flange Slewing Ring 648x848x56mm | Outher Width C:0.5512 in; Inner Width B:1.220 in; Bore Diameter D:3/4 in; Weight W:0.31 lb; Insert Bearing IB:Stainless Steel; Outside Diameter D2:1.8504 in; Basic Dynamic Radial Load Rating:2380 lbf; Dimension S:0.500 in; Basic Static Radial Load Rating Co:1470 lbf; Diameter D3:1.110 in; |
| Slewing Ring For Excavator HITACHI EX300-5, Part Number:9166468 | P60°:535 kN; h:60.325 mm; P90°:320 kN; PG:1/4 NPT; Initial grease fill:1304.1 g; A1:180.975 mm; Bearing:22236 CCK/W33; Eye bolt:2 x 3/8-16 UNC; da:163.512 mm; Bearing limiting speed:2600 r/min; |
| RK6-33P1Z Slewing Bearings (28.9x37.32x2.205inch) Without Grear | Material constant KM:1055; da min.:377 mm; Da max.:490 mm; Basic dynamic load rating C:8150 kN; Design (sliding contact surface combination):Steel/PTFE FRP; Mass plain bearing:200 kg; d:360 mm; dk:474 mm; α:2 °; b1:21 mm; |
| CRB20030UUT1 High Precision Cross Roller Ring Bearing | Preload class C GC:1200 N; Db max.:106 mm; d1:82.3 mm; Preload class B GB:600 N; Calculation factor e:0.68; Basic dynamic load rating C:48.8 kN; Reference grease quantity Gref:8.1 cm³; Static axial stiffness, preload class D:447 N/µm; Calculation factor f:1.12; Preload class A GA:300 N; |
| 011.40.1120 Slewing Bearing | Grease:2 800 min-1; rs (min):1 mm; Pu:5.770 kN; d1:95 mm; D1:72 mm; d:70 mm; dynamic Cr:46.550 kN; static Cor:127.000 kN; H:18 mm; Oil:3 800 min-1; |
| 024.60.3310.03 Bearing 3190x3503x240mm | Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.35 kg; D:68 mm; B:70 mm; Specific static load factor K0:20 N/mm²; d:60 mm; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; |
| 1797/3230GK5 Slewing Beairng | Reference speed:1400 r/min; Shaft washer:WS 89313; D1:67 mm; r1,2 min.:1.1 mm; D:115 mm; ra max.:1.1 mm; Housing washer:GS 89313; B:10.5 mm; Limiting speed:2800 r/min; Mass bearing:1.33 kg; |