| No. | Brand | C | K | A | T | a | G | h | b |
| 5304-ZZ | JAF | - | - | - | - | - | - | - | - |
| 12164-16G00-0C0 | - | - | - | - | - | - | - | - | - |
| 75 | - | - | - | - | - | - | - | - | - |
| SL045008-D-PP | INA | - | - | - | - | - | - | - | - |
| 10 | Parker | - | - | - | - | - | - | - | 14 mm |
| 20pcs | - | - | - | - | - | - | - | - | - |
| ZH02 | - | - | - | - | - | - | - | - | - |
| A8VO160 | Rexroth | - | - | - | - | - | - | - | - |
| 400x600x200 | - | - | - | - | - | - | - | - | - |
| 125 | - | 27 mm | - | - | - | 27 mm | - | - | - |
| 2016 | INA | - | - | - | - | - | - | - | - |
| 018F6857 | Danfoss | - | - | - | - | - | - | 50.8 mm | - |
| 688zz | INA | - | - | - | - | - | - | - | - |
| 612121406 | - | - | - | - | - | - | - | - | - |
| 251 | - | - | - | - | - | - | Tr 800x7 | 34 mm | 60 mm |
| 160 | - | - | - | - | - | - | M 72x4 | 265 mm | - |
| 4D95S | - | - | - | - | - | - | - | - | - |
| 6KG | - | - | - | - | - | - | - | 46.038 mm | - |
| T43014 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 20X32X7TC-BX | - | - | - | - | - | - | - | - | - |
| Q1 | - | - | - | - | - | - | - | - | - |
| PC35 | - | - | - | - | - | - | - | - | - |
| [20 | - | - | - | - | - | - | - | - | - |
| A10V17 | INA | - | - | - | - | - | - | - | - |
| E.950.20.00.C Four Contact Ball Slewing Ring 734x950.4x56mm | r1,2 min.:0.3 mm; Da:29.5 mm; D:35 mm; E:29 mm; C:26 mm; Db:25.6 mm; Basic static load rating C0:37.5 kN; ra max.:0.3 mm; da:28.4 mm; Limiting speed:18000 r/min; |
| XU080149 Cross Roller Bearing Manufacturer 101.6x196,85x22.22mm | b1:9.4 mm; Fatigue load limit Pu:375 kN; Da max.:425 mm; r1,2 min.:3 mm; Basic dynamic load rating C:1760 kN; B:118 mm; K:5 mm; da min.:336 mm; d:320 mm; s max.:6 mm; |
| VSA 200944-N Four Point Contact Slewing Ring | K:4 mm; Fatigue load limit Pu:120 kN; D3:254 mm; Snap ring in accordance with DIN 471:260x5; Calculation factor kr:0.4; C:79 mm; da min.:197 mm; d1 ≈:218 mm; Basic static load rating C0:1180 kN; b1:7 mm; |
| 6787/820 Slewing Bearing | Sealed Speed Rating n3:1900 rpm; B:55.00 mm; Fillet Radius ra:3.00 mm; d:95.000 mm; Oil Speed Rating Open/Shielded n2:3300 rpm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:203000 N; Basic Static Radial Load Rating Co:173000 N; D:250.0000 mm; Grease Speed Rating Open/Shielded n1:2700 rpm; |
| 013.75.3150 Slewing Bearing | Grease Speed Rating n1:3000 rpm; B:47.00 mm; d:100.000 mm; Sealed Speed Rating n3:2100 rpm; Accessories:Two Shields; Fillet Radius ra:2.50 mm; D:215.0000 mm; Basic Static Radial Load Rating Co:140000 N; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:174000 N; |
| 209-25-71101 Swing Bearing For Komatsu PC750SE-6K Excavator | b:22.3 mm; Reference speed:750 r/min; Calculation factor Y1:1.9; Calculation factor Y0:1.8; da min.:320 mm; Fatigue load limit Pu:425 kN; Mass bearing:185 kg; ra max.:4 mm; d:300 mm; Calculation factor e:0.35; |
| CAT 307C Slewing Bearing | D:800 mm; d1 ≈:795 mm; Basic dynamic load rating C:852 kN; Limiting speed:560 r/min; r1,2 min.:4 mm; Reference speed:400 r/min; Fatigue load limit Pu:91.5 kN; Mass bearing (including seat washer where applicable):105 kg; Minimum load factor A:230; Basic static load rating C0:6700 kN; |
| RK6-25N1Z Heavy Duty Slewing Ring Bearing With Internal Gear | Fillet Radius ra:1.50 mm; D:90.0000 mm; Accessories:Two Seals; B:36.50 mm; Basic Dynamic Radial Load Rating C:67100 N; Grease Speed Rating n1:5000 rpm; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:65500 N; d:40.000 mm; |
| 20Y-25-11300 Swing Bearing For Komatsu PC240-5K Excavator | B1:6 mm; r3,4 min.:1.5 mm; d:65 mm; d1 ≈:84.4 mm; B2:10 mm; Mass angle ring:0.12 kg; |
| RB7013 Cross Roller Bearing 70x100x13mm | Limiting speed:750 r/min; Calculation factor e:0.28; Da max.:677 mm; D:700 mm; D1 ≈:619 mm; B1:250 mm; Reference speed:450 r/min; Fatigue load limit Pu:695 kN; Basic static load rating C0:10400 kN; Calculation factor Y1:2.4; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
L4-13P9Z Four-point Contact Ball Slewing Rings Video