No. | Brand | C | K | A | T | a | G | h | b |
17 | - | - | - | - | - | - | - | - | 15.5 mm |
1220*2440mm | - | - | - | - | - | - | - | - | 22.3 mm |
PUMP_PVP48303R6A2M | Parker | - | - | - | - | - | - | - | - |
1600,ANU,AHU | INA | - | - | - | 405 mm | - | - | - | - |
6302 | fag | - | - | 73.025 mm | - | - | - | - | - |
15-25-15 | - | - | - | - | - | 6 mm | - | - | - |
(3064) | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
Sk350 | INA | - | - | - | - | - | - | - | - |
6305 | NSK | - | - | - | - | - | - | - | - |
12mm | INA | - | - | - | - | - | - | - | - |
JF-17 | - | - | 3 mm | - | - | - | - | - | - |
5180A | - | - | - | - | - | - | - | - | - |
3/4" | - | - | - | - | - | - | - | - | - |
CM163DL-115656 | Parker | - | - | - | 21 mm | - | - | - | - |
N21% | INA | - | - | - | - | - | - | - | - |
17X40X12 | - | - | - | - | - | - | - | - | - |
52% | - | - | - | - | - | - | - | - | - |
NU1017-M1-C3 | fag | - | - | - | - | - | - | - | - |
MBK2085 | - | - | - | - | - | 12.2 mm | - | - | - |
7008CD/P4ADBA | - | - | - | - | - | - | - | - | - |
5] | - | - | - | - | - | - | - | - | - |
2203 | SKF | - | - | - | - | - | - | - | - |
99% | - | - | - | - | - | - | - | - | - |
311B | - | - | - | - | - | - | - | - | - |
014.75.4000 Slewing Bearing | B:66.70 mm; D:150.0000 mm; Oil Speed Rating n2:3800 rpm; d:70.000 mm; Basic Static Radial Load Rating Co:125000 N; Sealed Speed Rating n3:2800 rpm; Grease Speed Rating n1:2800 rpm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:153000 N; |
010.20.250 Slewing Bearing | Fatigue load limit Pu:0.655 kN; Basic dynamic load rating C:25.5 kN; Recommended tightening torque for grub screw:6.5 N·m; Mass bearing unit:0.81 kg; s1:25.4 mm; Hexagonal key size for grub screw N:3.969 mm; Thread grub screw G2:5/16-24 UNF; B:42.9 mm; d:31.75 mm; A:35 mm; |
133.40.1400 Slewing Bearing | Sealed Speed Rating n3:26000 rpm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; D:19.0000 mm; Basic Static Radial Load Rating Co:950 N; d:6.000 mm; Basic Dynamic Radial Load Rating C:2210 N; Oil Speed Rating Open/Shielded n2:43000 rpm; Accessories:One Shield; B:6.00 mm; |
XSU141094 Cross Roller Bearing Manufacturer 1024x1164x56mm | Rubber seating ring:RIS 208 A; C:21 mm; r1,2 min.:1 mm; B:49.2 mm; Thread grub screw G2:5/16-24 UNF; Basic static load rating C0:19 kN; s1:30.2 mm; Fatigue load limit Pu:0.8 kN; Recommended tightening torque for grub screw:6.5 N·m; Limiting speed1):2800 r/min; |
XSU080258 Cross Roller Bearing Manufacturer 220x295x25.4mm | D:300 mm; with tapered bore:1 500 min-1; Pu:993 kN; d:140 mm; Grease:1270 kN; rs (min):4 mm; Static (Cor):13.9 mm; with cylindrical bore:1 200 min-1; B:102 mm; Oil:122.250 kN; |
112.32.1800 Slewing Bearing | Accessories:Two Shields; d:70.000 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; Grease Speed Rating Open/Shielded n1:5000 rpm; Basic Static Radial Load Rating Co:45000 N; D:125.0000 mm; Basic Dynamic Radial Load Rating C:60500 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5000 rpm; |
CRB12025UUT1 High Precision Cross Roller Ring Bearing | Calculation factor Y0:1.8; Limiting speed:2500 r/min; Calculation factor Y1:1.9; d2 ≈:235 mm; d:200 mm; da min.:217 mm; Da max.:343 mm; K:9 mm; Mass bearing:56.5 kg; b:16.7 mm; |
VLI301255N Four Contact Ball Slewing Ring 1110x1400x90mm | Initial grease fill:181.44 g; J min.:295.275 mm; Cap bolt recommended tightening torque:203.4 N·m; A1:111.125 mm; Ca:55.804 mm; Bearing:23024 CCK/W33; Adapter sleeve assembly:SNW 3024x4.1/4; P180°:48.9 kN; Housing:FSAF 024 KA; R2:30.163 mm; |
9I-1B30-1205-0644 Four Point Contact Ball Slewing Ring | ba min.:72 mm; bb:66.5 mm; H1:170 mm; Locating ring:2 x FRB 17/280; Mass housing:69.5 kg; bc:107.5 mm; N4 max.:20 mm; H2:70 mm; Cap bolt, rec. tightening torque:350 N·m; Q150°:1040 kN; |
1787/1075G2 Slewing Beairng | B1:122 mm; d1:150.813 mm; B4:28.5 mm; Hydraulic nut:HMV 34 E; d:170 mm; Mass adapter sleeve assembly:6.8 kg; B:26 mm; G:M 170x3; d3:200 mm; Lock nut:KML 34; |
L6-29P9Z Four-point Contact Ball Slewing Bearings Video