| 121.25.560 Slewing Bearing | d2 max.:65 mm; l7 min.:30 mm; Specific dynamic load factor K:100 N/mm²; l2 max.:128 mm; l1 min.:53 mm; α:7 °; r1 min.:0.6 mm; Material constant KM:330; Mass rod end:0.53 kg; B:20 mm; |
| Slewing Ring For Excavator KOBELCO 40SR-2, Part Number:PY40F00001F1 | G:Tr 440x5; G3:12 mm; B1:228 mm; Mass adapter sleeve assembly:63 kg; A:6.5 mm; Hydraulic nut:HMV 88E; Lock nut:HME 3088; Locking device:MS 3092-88; d:440 mm; d1:410 mm; |
| PC228/32 Slewing Bearing | l4 max.:284 mm; B:49 mm; α:6 °; Basic static load rating C0:530 kN; Specific dynamic load factor K:100 N/mm²; C1 max.:43 mm; G:M 56x4; r1 min.:1 mm; l3 min.:80 mm; Mass rod end:10.5 kg; |
| CRBB03010 Cross Roller Ring (30x55x10mm) Robots Ring | d:1.500 in; Basic Static Radial Load Rating Co:17000 N; Fillet Radius ra:0.04 in; Basic Dynamic Radial Load Rating C:23800 N; D:2.6875 in; Grease Speed Rating n1:9800 rpm; B:0.5625 in; Oil Speed Rating n2:36000 rpm; Fillet Radius rb:0.024 in; |
| 80 mm x 140 mm x 26 mm XU120179 Cross Roller Bearing Manufacturer 124.5x234x35mm | P180°:285 kN; h:69.85 mm; L:831.85 mm; P60°:691 kN; Taconite seal:TER 553; N1:41.275 mm; Stabilizing ring:2 x A8898; Pa:81.4 kN; Cap bolt recommended tightening torque:4284.4 N·m; H2:95.25 mm; Size (mm):80 mm x 140 mm x 26 mm ; |
| RU 85 Crossed Roller Bearing 55x120x15mm | Dimension S1:1.0000 in; Shaft Diameter D:1 1/4 in; Basic Static Radial Load Rating Co:2520 lbf; Dimension N:0.7813 in; Dimension C:3.5000 in; Dimension G:0.3750 in; Dimension H:1.1563 in; Dimension J:1.6250 in; Dimension L:4.3750 in; Dimension D2:2.7500 in; |
| RE 4510 UU Crossed Roller Bearing 45x70x10mm | d:45.000 mm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:13400 N; Grease Speed Rating n1:9000 rpm; D:68.0000 mm; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:15100 N; Fillet Radius rb:0.15 mm; B:12.00 mm; |
| Excavator Slewing Ring For KOMATSU PC120-6, Part Number:203-25-62100 | Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; B:10 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.006 kg; Tolerance housing:H7; Tolerance shaft:h8; D:18 mm; |
| 789/1260G2 Slewing Bearing 1260*1509*90mm | ra max.:1 mm; Db min.:98 mm; Limiting speed:10000 r/min; d:55 mm; r1,2 min.:1.1 mm; da min.:61 mm; ba min.:3 mm; Fatigue load limit Pu:0.9 kN; D2 ≈:81.5 mm; r0 max.:0.6 mm; |
| RK6-29P1Z Heavy Duty Slewing Ring Bearing With No Gear | P60°:249 kN; PG:1/4 NPT; H1:133.35 mm; Labyrinth ring:2 x LOR 112; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:8; A1:120.65 mm; P120°:94.3 kN; h:46.831 mm; ba:53.181 mm; |