| No. | Brand | C | K | A | T | a | G | h | b |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 511 | - | - | - | - | - | - | - | - | 4.2 mm |
| VN1500 | NTN | - | - | - | - | - | - | - | - |
| 41.63030 | Nachi | - | 7.5 mm | - | - | - | - | - | 13.9 mm |
| 4D95L | - | - | - | - | - | - | - | - | - |
| 3196 | Timken | - | - | - | - | - | - | - | - |
| (2 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 7783-20-2 | - | - | - | - | - | - | - | - | - |
| M2X146B | - | - | - | - | - | - | - | - | - |
| 6305 | NSK | - | - | - | - | - | - | - | - |
| 032U7120 | Danfoss | - | - | - | - | - | - | - | - |
| cas:16245-77-5 | - | - | - | - | - | - | - | - | - |
| 37152 | - | - | - | - | - | - | - | - | - |
| DC2 | - | 488 mm | 9 mm | - | - | - | - | - | 16.7 mm |
| 14512948 | - | - | - | - | - | - | - | - | - |
| 2040 | John Deere | - | - | - | - | - | - | - | - |
| PC130-5 | - | - | - | - | - | - | - | - | mm |
| HK2016 | INA | - | - | - | - | - | - | - | - |
| 979 | Rexroth | - | - | - | - | - | - | - | - |
| 33207-XL | fag | - | - | - | - | - | - | - | - |
| YRT100 Rotary Table Bearing 100x185x38mm | Cap bolt:5/8-11 UNC; A1:120.65 mm; Taconite seal (db shaft position):TER 127; H:257.175 mm; Lock nut:AN 24; P60°:249 kN; Eye bolt:3/8-16 UNC; Housing:SAFS 224; S:4.763 mm; Lock washer:W 24; |
| DH300-5 Slewing Bearing | Mass needle roller and cage assembly:0.0007 kg; U:8 mm; Ew:8 mm; Fw:5 mm; Reference speed:36000 r/min; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:2 kN; Limiting speed:40000 r/min; Fatigue load limit Pu:0.212 kN; |
| VLA200844N ZT Four Contact Ball Slewing Ring 734x950.1x56mm | D:200 mm; Operating clearance factor k2:0.103; s1 max.:11.1 mm; da max.:150 mm; B:53 mm; r1,2 min.:2.1 mm; Fatigue load limit Pu:64 kN; Reference speed:3200 r/min; G:M 120x2; Mass bearing + sleeve:7.65 kg; |
| VLU200544ZT Flange Slewing Ring 434x648x56mm | Mass bushing:0.32 kg; Tolerance housing:H7; Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; Specific dynamic load factor K:10 N/mm²; d:60 mm; Specific static load factor K0:20 N/mm²; D:70 mm; B:50 mm; |
| CRBS1008 High Precision Cross Roller Bearing | H:134.938 mm; N1:19.05 mm; End plug (suffix Y):EPR 4; A2:180.975 mm; RG:1/8 NPT; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; H1:69.85 mm; Mass pillow block:8.35 kg; Initial grease fill:82.215 g; |
| NRXT9016E/ Crossed Roller Bearings (90x130x16mm) Industrial Robots Bearing | D:100 mm; da max.:70 mm; B4:12.5 mm; Calculation factor Y1:3.3; Fatigue load limit Pu:0.54 kN; d3:75 mm; Da max.:91 mm; Permissible angular misalignment α:2.5 °; D1 ≈:86.5 mm; r1,2 min.:1.5 mm; |
| HS6-25E1Z Slewing Bearings (21x29.15x2.2inch) With Internal Gear | J6:83 mm; Housing:FY 505 M/VZ033; Recommended diameter for attachment bolts, mm G:10 mm; Basic dynamic load rating C:14 kN; Recommended tightening torque for grub screw:4 N·m; Housing material:Cast iron; Da:74.6 mm; Db1:65 mm; Bearing:YARAG 205-100; B:34.1 mm; |
| 9E-1B35-1180-0813 Four Point Contact Ball Slewing Ring | r1,2 min.:12 mm; Basic static load rating C0:14600 kN; Fatigue load limit Pu:1270 kN; D:600 mm; r3,4 min.:3 mm; Basic dynamic load rating C:5500 kN; B:368 mm; Calculation factor kr:500; K:9 mm; F:504 mm; |
| 1168/560VT3 Bearing 560x780x60mm | da min.:446 mm; Mass bearing:355 kg; Limiting speed:900 r/min; Misalignment factor k1:0.113; d:420 mm; s1 max.:34.8 mm; ra max.:5 mm; d2 ≈:507 mm; Da max.:674 mm; Operating clearance factor k2:0.098; |
| RB6013 Cross Roller Bearing 60x90x13mm | Bearing:23024 CCK/W33; ba:46.831 mm; Initial grease fill:181.44 g; Appropriate attachment bolt size G:0.875 in; Mass pillow block:28.6 kg; N1:25.4 mm; P150°:46.3 kN; Cap bolt:2 x 3/4-10 UNC; A1:111.125 mm; Cap bolt recommended tightening torque:203.4 N·m; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Bearing RKS.060.20.0944 944mm X 1016mm X 945.5mm Video