| No. | Brand | C | K | A | T | a | G | h | b |
| 2019 | - | - | - | - | - | - | - | 38.1 mm | - |
| 21ply | - | - | - | - | - | - | - | - | - |
| Z250 | NTN | - | - | - | - | - | - | 28.575 mm | - |
| 440x720x280 | - | - | - | - | - | - | - | - | - |
| 155 | NTN | - | - | - | - | - | - | - | - |
| 318,317,300,212,140,112,110 | John Deere | - | - | - | - | - | - | - | - |
| 22228KBR | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 15X10 | Dodge | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 17216318 | - | - | - | - | - | - | - | - | - |
| 212140106001 | - | 46 mm | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 4'x10' | - | - | - | - | - | - | - | - | - |
| LR5204NPPU, | INA | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| Cartridge(220g) | - | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | - | - | - | - | - | - |
| A1 | - | - | - | - | - | - | - | - | - |
| 1220X2440 | - | - | - | - | - | 497 mm | - | - | - |
| Crossed Roller Bearings XSA140414-N Standard Series 14, External Gear Teeth, Lip Seals On Both Sides | da:127 mm; A2:193.675 mm; Cap bolt:3/4-10 UNC; R1:87.313 mm; Da:250 mm; End plug (suffix Y):EPR 27; Housing:SSAFS 528; H1:152.4 mm; Stabilizing ring:SR-28-0; Cap bolt, SAE grade:8; |
| VLU200644 Slewing Bearing M-anufacturer 534x748x56mm | Static (Cor):27.300 kN; with cylindrical bore:7 500 min-1; Oil:6 300 min-1; d:55 mm; rs Dynamic (Cr):1.5 mm; Pu:10.000 kN; with tapered bore:2211 ; D:100 mm; Grease:0.450 kN; B1:mm; |
| NRXT25025E Crossed Roller Bearing 250x310x25mm | Fatigue load limit Pu:1.08 kN; Basic dynamic load rating C:6.82 kN; U:16 mm; Fw:10 mm; Mass needle roller and cage assembly:0.0029 kg; Limiting speed:32000 r/min; Ew:13 mm; Reference speed:28000 r/min; Basic static load rating C0:9.5 kN; |
| 130.32.800 Slewing Bearing | d:80 mm; D:170 mm; Grease:890 min-1; rs (min):2.1 mm; Oil:1 200 min-1; dynamic Cr:326.510 kN; D1:83 mm; H:68 mm; d1:170 mm; Pu:30.530 kN; |
| RB15030UU High Precision Cross Roller Ring Bearing | B:15.9 mm; D2R:30.2 mm; Oil Speed Rating n2:20000 rpm; Grease Speed Rating n1:15000 rpm; d:12.000 mm; Basic Static Radial Load Rating Co:5600 N; Basic Dynamic Radial Load Rating C:10400 N; Sealed Speed Rating n3:15000 rpm; Accessories:One Shield & Snap-Ri; D:32.0000 mm; |
| 130.45.2000 Slewing Bearing | B:18 mm; da min.:66 mm; Static axial stiffness, preload class C:112 N/µm; Da max.:89 mm; Fatigue load limit Pu:0.54 kN; Calculation factor f2B:1.03; Ball diameter Dw:7.938 mm; D:95 mm; r1,2 min.:1.1 mm; Static axial stiffness, preload class B:83 N/µm; |
| NRXT14025 High Precision Cross Roller Ring Bearing | d:70.000 mm; Grease Speed Rating n1:14000 rpm; D:110.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:42300 N; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:20000 rpm; Basic Static Radial Load Rating Co:40000 N; B:20.00 mm; |
| Slewing Ring For Excavator HITACHI EX270-5, Part Number:9154037 | H:222.25 mm; Housing:FSAF 617; Cap bolt recommended tightening torque:515.2 N·m; RG:3/8 NPT; A1:111.125 mm; L:387.35 mm; ba:52.388 mm; J1:60.325 mm; P90°:62.3 kN; Bearing:1317 K; |
| NRXT7013E Crossed Roller Bearing 70x100x13mm | r2s (min):0.6 mm; B:23 mm; r1s (min):1.5 mm; Dynamic (Ca):82.5 kN; T:25.25 mm; Static (Coa):94.4 kN; rs (min):2 mm; C:20 mm; D:90 mm; a:19 mm; |
| A19-150P1 Four Point Contact Ball Slewing Bearings SLEWING RINGS | B3:3 mm; h:2 mm; b:5 mm; Axial static load carrying capacity:50 kN; G:M 35x1.5; Mass lock nut:0.091 kg; B:11.5 mm; d3:52 mm; Grub (set) screw size:M5; Associated spanner:HN 7; |
L9-42E9Z Four-point Contact Ball Slewing Rings With External Gear Video