| No. | Brand | C | K | A | T | a | G | h | b |
| 72400 | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| 510018 | Timken | - | - | - | - | - | - | - | - |
| 3000PSI | Parker | - | - | - | - | - | - | - | - |
| 09265-30004-000 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 1306 | - | - | - | 84.138 mm | - | 5.556 mm | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 7308BEGB4 | SKF | - | - | - | - | - | - | - | - |
| 511 | - | - | - | - | - | - | - | - | - |
| A-A1935 | - | - | - | - | - | - | - | - | - |
| V10 | - | - | - | 12 mm | - | - | Tr 750x7 | - | - |
| 2212EKTNGC3 | NSK | - | - | - | - | - | M 100x2 | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 13AT605H718 | - | - | - | - | - | - | - | - | - |
| 3X6 | - | - | - | - | - | - | - | - | - |
| 1999-2004 | Timken | - | - | - | - | - | - | - | - |
| 2007-2008 | koyo | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| SA1V016/028/045/A10VSO | Rexroth | - | - | - | - | - | - | - | - |
| 34478B | Bower | - | - | - | - | - | - | - | - |
| PHV-120 | INA | - | - | - | - | - | - | - | - |
| 7783-20-2 | - | - | - | - | - | - | - | - | - |
| 12mm-25mm | - | - | - | - | - | 58.002 mm | - | - | - |
| 1: | - | - | - | - | - | - | - | - | - |
| 2K | - | - | - | - | - | - | - | - | - |
| RU42 Cross Roller Bearing 20x70x12mm | α:6 °; h1:110 mm; d2 max.:75 mm; w:36 mm; r1 min.:0.6 mm; dk:40.7 mm; Basic static load rating C0:118 kN; Specific dynamic load factor K:300 N/mm²; d4 ≈:42 mm; d:30 mm; |
| RE 6013 Crossed Roller Bearing 60x90x13mm | s:2 mm; d2:95 mm; Pu:28.720 kN; b:mm; rs (min):3 mm; E:173.5 mm; F:122 mm; Dynamic (Ca):256 kN; r1s (min):3 mm; Static (Coa):266 kN; |
| RE45025 Cross Roller Bearing 450x500x25mm | B:20 mm; C:15.5 mm; Pu:9.680 kN; T:20 mm; D:75 mm; Static (Coa):79.4 kN; Dynamic (Ca):57.3 kN; a:17 mm; d2:45 mm; r2s (min):0.3 mm; |
| 40 mm x 90 mm x 23 mm MTO-210T Slewing Bearing | Mass angle ring:2.15 kg; d1 ≈:195.6 mm; r3,4 min.:4 mm; B1:15 mm; B2:31 mm; d:140 mm; Size (mm):40 mm x 90 mm x 23 mm ; |
| 21M-25-11100 Swing Bearing For Komatsu PC600LC-8 Excavator | |
| CRBH25025 Cross Roller Bearing 250x310x25mm | Oil Speed Rating n2:6000 rpm; Fillet Radius ra:1.50 mm; d:45.000 mm; Basic Static Radial Load Rating Co:52000 N; D:100.0000 mm; Basic Dynamic Radial Load Rating C:61800 N; B:39.70 mm; Grease Speed Rating n1:4500 rpm; |
| RKS.921150303001 Cross Roller Slewing Bearing | Permissible sliding velocity v min.:0 m/s; a:3 mm; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.08; d:40 mm; Specific static load factor K0:45 N/mm²; h:41 mm; D:50 mm; B:80 mm; Tolerance shaft:e7; |
| A16-95N6 Four Point Contact Ball Slewing Bearing With Inernal Gear | da min.:463 mm; Calculation factor Y2:4.8; D1 ≈:614 mm; d2 ≈:505 mm; Mass bearing:178 kg; r1,2 min.:6 mm; b:22.3 mm; Fatigue load limit Pu:450 kN; Basic dynamic load rating C:3834 kN; ra max.:5 mm; |
| SH200A1 Slewing Bearing | Pa:7.12 kN; L:330.2 mm; Initial grease fill:218.29 g; J min.:250.825 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:2 x 5/8-11 UNC; P120°:23.1 kN; PG:1/8 NPT; Housing:FSAF 517; A2:198.438 mm; |
| 40 mm x 80 mm x 18 mm SX011880 Cross Roller Bearing 400x500x46mm | Limiting speed:850 r/min; B1:56.3 mm; Housing material:Cast iron; Recommended diameter for attachment bolts, inch G:0.5625 in; Recommended tightening torque for grub screw:16.5 N·m; Thread grub screw G2:3/8-24 UNF; N:16 mm; A3:3.2 mm; A:39 mm; A1:14 mm; Size (mm):40 mm x 80 mm x 18 mm ; |
R9-67N3 Crossed Roller Slewing Rings With Internal Gear Video