| No. | Brand | C | K | A | T | a | G | h | b |
| 15mm | - | - | - | - | - | - | - | - | - |
| P3105L00C1C20PA00D00S1A1P/312, | Parker | - | - | - | - | - | - | - | - |
| E38 | - | - | - | - | - | - | - | - | - |
| 20Ton | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 1200*1000*150mm | - | - | - | - | - | - | - | - | - |
| EX100 | INA | - | - | - | - | - | - | - | - |
| 21975 | - | - | - | - | - | - | Tr 710x7 | - | - |
| 12kw | - | - | - | - | - | - | - | - | - |
| ZDR6DA2-43/25y | Rexroth | - | - | - | - | - | - | 60.325 mm | - |
| F0 | - | - | - | - | - | - | M 120x2 | - | - |
| 32015 | SKF | - | - | - | - | - | - | - | - |
| D20134300E | - | - | - | - | - | - | - | - | - |
| 22206CK | NSK | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 9mm/ | - | - | - | - | - | - | - | - | - |
| 6308 | INA | - | - | - | - | - | - | - | - |
| HCB71818C.TPA.P4.UL | - | - | - | - | - | - | - | - | - |
| GE17 | - | - | - | - | - | - | - | - | - |
| 65 | - | - | - | - | - | - | - | - | - |
| BRS-11 | - | - | - | - | - | - | - | - | - |
| 6207 | - | - | - | - | - | - | - | - | - |
| 91-32 1355/1-06155 Four-point Contact Ball Slewing Bearing With External Gear | d1:1110 mm; Basic static load rating C0:45500 kN; Minimum axial load factor A:170; Da max.:895 mm; Mass bearing:580 kg; r1,2 min.:7.5 mm; ra max.:6 mm; Limiting speed:220 r/min; D:1120 mm; da min.:1075 mm; |
| RE15030 Cross Roller Bearing 150x230x30mm | Pa:36.9 kN; P180°:57.4 kN; Cap bolt, SAE grade:8; h:42.069 mm; Lock nut:AN 20; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; A2:155.575 mm; Initial grease fill:365.71 g; PG:1/4 NPT; |
| L9-38E9Z Four-point Contact Ball Slewing Rings With External Gear | Max. speed for PosiTrac Plus seal:1450 r/min; h:36.513 mm; R2:22.225 mm; PosiTrac Plus contact element (dc shaft position):B10724-64; A2:127 mm; Cap bolt:2 x 5/8-11 UNC; db:100.013 mm; P150°:28.5 kN; N1:22.225 mm; H1:95.25 mm; |
| VLU300955 Four Contact Ball Slewing Ring 805x1100x90mm | Ca:137.82 mm; Max. speed for Taconite seal:425 r/min; da:182.563 mm; Eye bolt:2 x 3/8-16 UNC; P180°:145 kN; S:4.763 mm; H1:209.55 mm; Stabilizing ring:SR-40-34; R1:122.237 mm; R2:46.038 mm; |
| 76.2 x 3.5 Inch | 88.9 Millimeter x 50.8 RU 297 UUCC0 Crossed Roller Bearing 210x380x40mm | D:150.0000 mm; Basic Dynamic Radial Load Rating C:104000 N; Basic Static Radial Load Rating Co:93000 N; Oil Speed Rating n2:14000 rpm; d:85.000 mm; B:28.00 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:10000 rpm; Size (mm):76.2 x 3.5 Inch | 88.9 Millimeter x 50.8 ; |
| MTO-210X Slewing Bearings(210x373x50mm) (8.268x14.686x1.968inch) Without Gear | D:340.0000 mm; d:220.000 mm; Oil Speed Rating Open/Shielded n2:2200 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:247000 N; B:56.00 mm; Accessories:One Shield & Snap-Ri; Grease Speed Rating Open/Shielded n1:1800 rpm; Sealed Speed Rating n3:1100 rpm; Basic Static Radial Load Rating Co:290000 N; |
| RA11008 Crossed Roller Bearings 110x126x8mm | Oil Speed Rating n2:8000 rpm; Grease Speed Rating n1:6800 rpm; d:50.000 mm; Basic Dynamic Radial Load Rating C:31900 N; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:34500 N; D:72.0000 mm; B:24.00 mm; Fillet Radius rb:0.15 mm; |
| 133.32.900 Slewing Bearing | D:130 mm; Dynamic (Cr):3 mm; Grease:315 kN; Static (Cor):5.5 mm; Pu:304 kN; rs (min):2.1 mm; with tapered bore:3 600 min-1; B:46 mm; d:60 mm; with cylindrical bore:2 800 min-1; |
| RE 30025 Crossed Roller Bearing 300x360x25mm | Da max.:465 mm; Basic static load rating C0:3450 kN; d:320 mm; das:359 mm; B:121 mm; E:449.5 mm; Calculation factor Y:0.4; Reference speed:560 r/min; D:480 mm; Basic dynamic load rating C:1980 kN; |
| 281.30.1200.013 Four Contact Ball Slewing Ring 1105x1398x90mm | Basic static load rating C0:224 kN; D:110 mm; Calculation factor Y2:2.7; b:6 mm; d2 ≈:63.9 mm; B1:50 mm; Da max.:99 mm; Reference speed:4800 r/min; ra max.:2 mm; Fatigue load limit Pu:24 kN; |
797/1380G2 Slewing Bearing Video