No. | Brand | C | K | A | T | a | G | h | b |
R166-2RS/C | - | - | - | 65 mm | - | - | - | - | - |
35x62x14 | NTN | - | - | - | - | - | - | - | - |
TD05H | - | - | - | - | - | - | - | - | - |
SR-2500FG | - | - | - | - | - | - | - | - | - |
[10 | - | - | - | - | - | - | - | - | - |
PC750-6 | - | - | - | 15 mm | - | - | Tr 950x8 | - | - |
206 | - | - | - | - | - | - | - | - | - |
50lpm | - | - | - | - | - | - | - | - | - |
2019 | - | - | - | - | - | - | - | - | mm |
TB0330FM100AAAB | Parker | - | - | - | - | - | - | - | - |
3041DSTN | koyo | - | - | - | - | - | - | - | 22.3 mm |
2 | - | - | - | - | - | - | - | - | - |
ZDR6DB2-43/75YM | Rexroth | - | - | - | - | - | - | - | 3 mm |
35A20 | - | - | - | - | 336.55 mm | - | - | - | - |
(WD580) | - | - | - | - | - | - | - | - | - |
24x11x8 | - | - | - | - | - | - | - | - | - |
6SD1T | - | - | - | - | - | - | - | - | - |
6209N/C3 | SKF | - | - | - | - | - | - | - | - |
30311JR | - | - | - | - | - | - | - | - | - |
227g | - | - | - | - | - | - | - | - | - |
38ED | Timken | - | - | - | - | - | - | 62.706 mm | - |
6700ZZ-6706ZZ | - | - | - | - | - | - | - | - | - |
NU2215 | NSK | - | - | 31 mm | - | - | - | - | - |
1-5pcs | - | - | - | - | - | - | - | - | - |
5x5 | - | - | - | - | - | - | - | - | - |
RKS.21 0741 Light Series Four-point Contact Ball Slewing Bearing With External Gear | d:190 mm; B:120 mm; with tapered bore:1 100 min-1; rs (min):4 mm; D:340 mm; Grease:2420 kN; with cylindrical bore:850 min-1; Static (Cor):16.7 mm; Oil:220.310 kN; Dynamic (Cr):9 mm; |
060.20.0644.500.01.1503 Slewing Ring Bearing | Basic static load rating C0:440 kN; D2:120 mm; C:18 mm; Mass bearing (including seat washer where applicable):4.7 kg; D3:160 mm; D1 ≈:93 mm; H:54.6 mm; Da max.:120 mm; Fatigue load limit Pu:14.6 kN; da min.:129 mm; |
110.50.4500 Slewing Bearing | d:140 mm; F:180 mm; r3,4 min.:4 mm; Basic static load rating C0:830 kN; Reference speed:2400 r/min; Mass bearing:23.5 kg; Axial load factor Y:0.6; Da max.:282.5 mm; da min.:157 mm; D:300 mm; |
A14-19P4 Four Point Contact Ball Slewing Bearings SLEWING RINGS | RG:3/4 NPT; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 27; Initial grease fill:481.95 g; H:305.594 mm; A2:193.675 mm; Da:250 mm; P150°:85.9 kN; L:511.175 mm; R1:87.313 mm; |
XU080430 Cross Roller Bearing 380x480x26mm | Oil Speed Rating Open/Shielded n2:12000 rpm; D:68.0000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:11600 N; B:15.00 mm; Basic Dynamic Radial Load Rating C:20800 N; d:40.000 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:9500 rpm; Sealed Speed Rating n3:6300 rpm; |
RE25030 Cross Roller Bearing 250x330x30mm | Basic static load rating C0:490 kN; da min.:108 mm; b:6 mm; Calculation factor Y2:3.4; d2 ≈:115 mm; B1:64 mm; D:165 mm; G1:11 mm; B2 ≈:68 mm; B:52 mm; |
1798/1100G2K Bearing 1100x1400x145mm | Adapter sleeve assembly:SNW 34x5.13/16; PG:1/4 NPT; P180°:133 kN; Bearing:22234 CCK/W33; A1:171.45 mm; A2:309.563 mm; Max. speed for Taconite seal:520 r/min; Initial grease fill:878.85 g; N1:28.575 mm; Ca:95.809 mm; |
R11-71N3 Crossed Roller Slewing Rings With Internal Gear | H1:114.3 mm; N1:22.225 mm; P60°:104 kN; Adapter sleeve assembly:SNW 117x2.15/16; P150°:35.6 kN; L:387.35 mm; J1:60.325 mm; Cap bolt:2 x 3/4-10 UNC; Bearing:1317 K; End plug (suffix Y):EPR 10; |
Crane Slewing Bearing China 3R13-109NXX5 Crane Slewing Ring | Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2300 rpm; D:200.0000 mm; Basic Dynamic Radial Load Rating C:265000 N; B:76.00 mm; Basic Static Radial Load Rating Co:310000 N; d:110.000 mm; Oil Speed Rating n2:3000 rpm; |
020.25.560 Slewing Bearing | Weight W:0.29 kg; Dimension L:70.0 mm; Insert Bearing IB:ZMaRC; Dimension A1:30.0 mm; Diameter N:11.5 mm; Height H:124.0 mm; Height T:38.8 mm; Shaft Diameter D:25 mm; Basic Dynamic Radial Load Rating C:14000 N; Dimension DA:63.5 mm; |
78992 Slewing Bearing Video