| No. | Brand | C | K | A | T | a | G | h | b |
| 40 | - | - | - | - | - | - | - | - | - |
| (1220*2440) | - | - | - | - | - | - | - | - | - |
| 19M-04-11220 | - | - | - | - | - | - | - | - | - |
| 22228KBR | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | 530.022 mm | 20.904 mm | - |
| 50Mn | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | 11.5 mm |
| 30TAC62BSUC10PN7B | NSK | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 3 | INA | - | - | - | - | - | - | - | - |
| 6007-2RS | - | 33.338 mm | - | - | - | 27.26 mm | - | - | - |
| LM6UU | - | - | - | - | - | - | - | - | - |
| 8-94173412-0 | - | - | - | - | - | - | - | - | - |
| 6007ZZC4 | - | - | - | - | - | - | - | - | - |
| 1pc | - | - | - | 9 mm | - | - | Tr 630x6 | - | - |
| 38KTD | RBC | 13 mm | - | - | 16.25 mm | 12 mm | - | - | - |
| 6200C3 | SKF | - | - | - | - | - | - | - | - |
| FNYBU16LOPN | Thomson | - | - | 32.5 mm | - | - | - | - | - |
| 75kw | - | - | - | - | - | - | - | - | - |
| 33017 | Timken | - | - | - | - | - | M 160x3 | - | - |
| 5pcs | - | - | - | - | - | - | M 85x2 | - | - |
| 510084 | Timken | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| ListingAT10123 | John Deere | - | - | - | - | - | - | 54.769 mm | - |
| CBGJ2080/2080/2040 | - | - | - | - | - | - | - | - | - |
| NKX30 | SKF | - | - | - | - | - | - | - | - |
| 9O-1B30-0600-1113 Four Point Contact Ball Slewing Ring | Basic Static Radial Load Rating Co:1750 lbf; Insert Bearing IB:ZMaRC; Height H:4.8750 in; Dimension L:2.7500 in; Weight W:0.67 lb; Basic Dynamic Radial Load Rating:3150 lbf; Dimension DA:2.5000 in; Height T:1.5313 in; Distance J:3.9063 in; Shaft Diameter D:15/16 in; |
| CRBF8022ADUU High Precision Crossed Roller Bearing | d:1000 mm; A:15 mm; Nut for removal:HM 31/1060; B1:525 mm; G2:G 1/4; d1:950 mm; Mass withdrawal sleeve:485 kg; Hydraulic nut:HMV 212 E; B2:547 mm; G:Tr 1060x8; |
| RU 228 UUCC0 Cross Roller Bearing 160x295x35mm | Bearing:YAT 205-015; SWN:7 mm; GN:1/4-28 SAE-LT; Recommended diameter for attachment bolts, mm G:10 mm; Db1:65 mm; A5:20.5 mm; J7:12 mm; Da:63.5 mm; DN:6.5 mm; Basic static load rating C0:7.8 kN; |
| 132.32.800 Slewing Bearing | Eye bolt:3/8-16 UNC; J max.:441.325 mm; Ca:77.8 mm; Housing:SAF 528; P60°:249 kN; Bearing:22228 CCK/W33; h:51.594 mm; N1:28.575 mm; Cap bolt:2 x 1-8 UNC; Da:250 mm; |
| I.950.20.00.C Four Contact Ball Slewing Ring 738x948x56mm | B1:23 mm; d1 ≈:490 mm; B2:43 mm; r3,4 min.:5 mm; d:420 mm; Mass angle ring:10 kg; |
| Excavator Slewing Ring For KOMATSU PC240-8, Part Number:206-25-00301 | d:100 mm; G:M 100x2; Locking device:MB 20; d3:130 mm; B1:76 mm; d1:88.9 mm; Hydraulic nut:HMV 20 E; Mass adapter sleeve assembly:1.8 kg; B:18 mm; Lock nut:KM 20; |
| PC200-1 Slewing Bearing | D1 ≈:1053.6 mm; Calculation factor kr:640; Mass bearing:3480 kg; Basic dynamic load rating C:25500 kN; B:740 mm; Fatigue load limit Pu:3800 kN; Basic static load rating C0:85000 kN; F:885 mm; D:1210 mm; r3,4 min.:4 mm; |
| D7964 Bearing 320x550x85mm | Adapter sleeve assembly:SNW 3038x6.7/8; J min.:441.325 mm; End plug (suffix Y):EPR 21; Eye bolt:2 x 3/8-16 UNC; H1:169.875 mm; PG:1/4 NPT; A2:288.925 mm; J1:95.25 mm; Cap bolt, SAE grade:8; Max. speed for Taconite seal:440 r/min; |
| NRXT30035DD/ Crossed Roller Bearings (300x395x35mm) | Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:39300 N; Grease Speed Rating Open/Shielded n1:7000 rpm; d:35.000 mm; D:80.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; B:21.00 mm; Basic Static Radial Load Rating Co:28500 N; |
| 133.32.800 Slewing Bearing | Calculation factor A:0.014; Fatigue load limit Pu:1.22 kN; da min.:57 mm; Basic static load rating C0:28.5 kN; Calculation factor Y2:0.57; Standard grease:GXN; Calculation factor Y0:0.52; Db max.:85.8 mm; d:50 mm; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
789/650 Slewing Bearing Video