No. | Brand | C | K | A | T | a | G | h | b |
6301-2RS | fag | - | - | - | - | - | M 52x3 | 195 mm | - |
ZX210 | - | - | - | - | - | - | - | - | - |
6406 | - | - | - | - | - | - | - | - | - |
23080CCK/W33 | - | - | - | - | - | - | - | - | - |
pc200-7 | - | - | - | - | - | - | - | - | - |
15x24x5 | - | - | - | - | - | - | - | - | - |
DX120 | INA | - | - | - | - | - | - | - | - |
25kg | - | - | - | - | - | - | - | - | - |
6917VV | - | - | - | - | - | - | - | - | - |
900 | fag | - | - | - | - | - | - | - | - |
Nk2920tn | - | - | - | - | - | - | - | - | - |
4132-2CS5V | SKF | - | - | - | - | - | - | - | - |
10PC | - | - | - | - | - | - | - | 61.913 mm | - |
708-2G-00024 | - | - | - | - | - | - | - | - | - |
8x12x3.5 | - | - | - | - | - | - | - | - | - |
1979 | Timken | - | - | - | - | - | - | - | - |
SH200A1/A2/A3 | - | - | - | - | - | - | - | - | - |
2000 | koyo | - | - | - | - | - | - | - | - |
4X4 | - | - | - | - | - | - | - | - | - |
1200X1000mm | - | - | - | - | - | - | - | - | - |
6005Dduc3 | NSK | - | - | - | - | - | - | - | - |
20x27x4mm | - | - | - | - | 32.545 mm | - | - | - | - |
10043-52-4 | - | - | - | - | - | - | - | - | - |
6215 | NSK | 1200 mm | 12 mm | - | - | - | - | - | - |
(2) | - | - | - | - | - | - | - | - | - |
6806 | - | - | - | - | - | - | - | - | 22.3 mm |
LQX16-3W12EPFS-901 | Parker | 18 mm | - | - | 22.75 mm | - | - | - | - |
CRBC 40035 Crossed Roller Bearings 400x480x35mm Industrial Robots Arm Use | Grease Speed Rating n1:13000 rpm; d:25.000 mm; Basic Dynamic Radial Load Rating C:14300 N; B:15.00 mm; Basic Static Radial Load Rating Co:4000 N; D:52.0000 mm; Oil Speed Rating n2:16000 rpm; Fillet Radius ra:1.00 mm; |
VLU200744ZT Four Contact Ball Slewing Ring 634x848x56mm | D:130.0000 mm; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:121000 N; B:54.00 mm; Basic Static Radial Load Rating Co:95000 N; d:60.000 mm; Oil Speed Rating n2:4500 rpm; Accessories:One Seal; Grease Speed Rating n1:3400 rpm; Fillet Radius ra:2.00 mm; |
SX011868 Cross Roller Bearing 340x420x38mm | Da max.:11.2 mm; D2 ≈:11.15 mm; d2 ≈:6.5 mm; B:4.978 mm; r1,2 min.:0.3 mm; d:4.762 mm; Mass bearing:0.0028 kg; Basic static load rating C0:0.25 kN; Limiting speed:56000 r/min; D:12.7 mm; |
SK07-1 Slewing Bearing | d:40.1 mm; Grease:3 800 min-1; D:59.9 mm; Oil:5 000 min-1; Static (Coa):51.2 kN; B:10.8 mm; Dynamic (Ca):26.9 kN; Pu:2.327 kN; |
XSI140544N Crossed Roller Slewing Ring Slewing Bearing | r1 max.:0.6 mm; r1,2 min.:0.2 mm; Dw:2.5 mm; Mass needle roller:0.53 g; r2 max.:0.8 mm; Lw:13.8 mm; |
NRXT40035E/ Crossed Roller Bearings (400x480x35mm) | Pu:4430 kN; D:620 mm; Oil:572.330 kN; B:224 mm; Static (Cor):22.3 mm; rs (min):6 mm; Dynamic (Cr):12 mm; d:340 mm; with tapered bore:500 min-1; with cylindrical bore:420 min-1; |
XD.10.0686P5 Cross Tapered Roller Bearing 685.8x914.4x79.375mm | D:90.0000 mm; B:36.51 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; Basic Static Radial Load Rating Co:26000 N; Accessories:Synthetic Rubber Sea; Basic Dynamic Radial Load Rating C:44200 N; d:40.000 mm; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; Fillet Radius ra:1.50 mm; |
024.60.3310.03 Bearing 3190x3503x240mm | Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.35 kg; D:68 mm; B:70 mm; Specific static load factor K0:20 N/mm²; d:60 mm; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; |
CRB20025UUT1 High Precision Cross Roller Ring Bearing | Basic Dynamic Radial Load Rating C:9360 N; Fillet Radius ra:1.00 mm; d:12.000 mm; Basic Static Radial Load Rating Co:2160 N; B:12.00 mm; Oil Speed Rating n2:22000 rpm; D:37.0000 mm; Grease Speed Rating n1:18000 rpm; |
Slewing Bearing For Komatsu PC220-8 Excavator | Limiting speed:1400 r/min; d:120 mm; s:63 mm; H:74.1 mm; Minimum load factor A:5; Basic static load rating C0:980 kN; D3:220 mm; Reference speed:1000 r/min; Mass bearing (including seat washer where applicable):12.5 kg; D:210 mm; |
6789/1750 Slewing Bearing Video