| No. | Brand | C | K | A | T | a | G | h | b |
| E320D | - | - | - | 8 mm | - | - | Tr 670x6 | - | - |
| CHD-80 | - | - | 12 mm | - | - | - | - | - | - |
| 6007-2NSE | Nachi | - | - | - | - | - | - | - | - |
| (Mr74/C, | - | 62 mm | - | - | - | 65.899 mm | - | - | - |
| 2800W | - | - | - | - | - | - | - | - | - |
| 1 | INA | - | - | - | - | - | - | - | - |
| 6700ZZ-6706ZZ | - | - | - | - | - | - | - | - | - |
| HCD802U | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 22313K | Rollway | - | - | - | - | - | - | - | - |
| 4132-2CS5V | SKF | - | - | - | - | - | - | - | - |
| szs2053 | - | - | - | - | - | - | - | - | - |
| 216W | FAFNIR | - | - | 6.5 mm | - | - | - | - | - |
| 466, | John Deere | - | - | - | - | - | - | - | - |
| A10VG63 | - | - | - | - | - | - | - | - | - |
| PUMP_PVP48303R6A2M | Parker | - | - | - | - | - | - | - | - |
| 6204NR | - | - | - | - | - | - | - | - | - |
| 1220X2440X12/15/17/18mm | - | - | - | - | - | - | - | - | - |
| NU1022 | NSK | - | - | - | - | - | - | - | - |
| D66 | - | - | 9 mm | - | - | - | - | - | 16.7 mm |
| 51205 | - | - | - | - | - | - | - | - | - |
| 3mm/4mm | - | - | - | - | - | - | - | 50.8 mm | - |
| 708-2G-00024 | - | - | - | - | - | - | - | - | - |
| DH55 | - | - | - | - | - | - | - | - | - |
| MSN1312EL | Bower | - | - | - | - | - | - | - | - |
| 178764 Slewing Beairng | Da min.:73 mm; Db min.:82 mm; d1 ≈:62.95 mm; D:90 mm; B:33 mm; r3,4 min.:1.5 mm; Reference speed:6000 r/min; Fatigue load limit Pu:16 kN; Dimension series:2FD; C:27 mm; |
| 11-50 2130/2-06410 Four-point Contact Ball Slewing Bearing With External Gear | Tolerance housing:H7; Tolerance shaft:e7; B:140 mm; α:124 °; Coefficient of friction µ min.:0.08; Mass bushing:10.1 kg; h:252.5 mm; Specific dynamic load factor K:25 N/mm²; d:250 mm; a:7 mm; |
| SK07-1-N2/ Slewing Bearing | Da min.:391 mm; ra max.:1 mm; Lubricant:Maintenance free &nd; α:3 °; Da max.:446 mm; Material constant KM:1055; rb max.:3 mm; dk:400 mm; Sealing solution:-; r1 min.:1.1 mm; |
| RE 2008 UU Crossed Roller Bearing 20x36x8mm | A1:15 mm; Basic dynamic load rating C:35.1 kN; Recommended diameter for attachment bolts, inch G:0.625 in; N4:2 mm; B:51.6 mm; s1:32.6 mm; Recommended diameter for attachment bolts, mm G:16 mm; DN:6.5 mm; L:116 mm; B4:9 mm; |
| EX60-5 Slewing Bearing | Housing:FY 510 M/VZ033; J:111 mm; Fatigue load limit Pu:0.98 kN; J6:129 mm; A1:15 mm; T:66.1 mm; Recommended diameter for attachment bolts, inch G:0.625 in; Da:125.4 mm; s1:38.1 mm; L:143 mm; |
| Excavator Slewing Ring For KOMATSU PC210-5K, Part Number:20Y-25-11103 | Width A:1.3750 in; Dimension G:0.5000 in; Shaft Diameter D:1 7/16 in; Dimension C:3.5000 in; Dimension J:0.3125 in; Weight W:1.60 lb; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Pin Dia A1:0.2500 in; Basic Static Radial Load Rating Co:3440 lbf; |
| YRT80-TV Rotary Table Bearing 80x146x35mm | Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Oil Speed Rating n2:4500 rpm; d:60.000 mm; Basic Dynamic Radial Load Rating C:134000 N; Fillet Radius ra:2.00 mm; B:57.20 mm; Basic Static Radial Load Rating Co:143000 N; Accessories:One Seal & Snap-Ring; |
| RA6008UU High Precision Cross Roller Ring Bearing | Basic Static Radial Load Rating Co:21200 N; Basic Dynamic Radial Load Rating C:22900 N; D:52.0000 mm; Sealed Speed Rating n3:8000 rpm; d:25.000 mm; Oil Speed Rating n2:11000 rpm; Accessories:Two Seals; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:8000 rpm; B:22.20 mm; |
| SH200C3 Slewing Bearing | Calculation factor Y1:1.6; Permissible angular misalignment α:3 °; d1 ≈:72 mm; Mass bearing:2.3 kg; r1,2 min.:2 mm; Da max.:109 mm; D:120 mm; B:43 mm; Calculation factor e:0.4; Reference speed:11000 r/min; |
| A12-47P2 Four Point Contact Ball Slewing Bearings SLEWING RINGS | L:419.1 mm; H2:52.388 mm; N1:22.225 mm; S:4.763 mm; Da:200 mm; Mass pillow block:52.2 kg; J min.:320.675 mm; Bearing:22222 EK; Stabilizing ring:SR-22-19; Cap bolt recommended tightening torque:298.3 N·m; |
35 mm x 80 mm x 21 mm 1797/2600G Slewing Beairng Video
Koyo 6307 C3 Single Row Deep Groove Radial Ball Bearing
Part Number, 6307 C3. Measurement System, Metric. Bore Diameter, 35. Brand Name, Koyo. Item Diameter, 80. Item Weight, 2.0. Material, Chromium Steel
Koyo Bearing - 6307 2RD - Motion Industries
Buy Koyo Bearing Radial & Deep Groove Ball Bearings 6307 2RD direct from Motion Industries. Your proven service leader with reliable delivery since 1972
KOYO 6307 BALL BEARING | eBay
It is not indicative of any characteristic of the bearings that are sold
6307 35mm Bore x 80mmOD x 21.0mmW Single Row Deep
6307 35mm Bore x 80mmOD x 21.0mmW Single Row Deep Groove Ball Bearing ... 6307C3 KOY. UNSPSC. 31171504. Manufacturer. Koyo
Ball & Roller Bearings
13.2. 8 500. 7 700. 5 700. 10 000. 6307 ZZ. 6307 2RU. 6307 2RD. 6307 2RS. 43. 46. 72. 1.5. 0.457. Boundary dimensions. Basic load ratings. Fatigue. Factor
Koyo 6307-2RSC3 Radial Ball Bearing 35X80X21
Find all the bearings, bearing housings, v-belts, oil seals, collars you need and more including the SCO4A90N ATV Radial Ball Bearing 22X62X15 at
6307 KOYO Deep Groove - Quality Bearings Online Ltd
This 6307 KOYO bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 35x80x21