No. | Brand | C | K | A | T | a | G | h | b |
7228-BCBM | FAFNIR | - | - | - | - | - | - | 50.8 mm | - |
18mm | - | - | - | - | 29.25 mm | - | - | - | - |
6014.2RSR/6014, | fag | - | - | - | - | - | - | - | - |
16329 | IKO | - | - | - | - | - | - | - | - |
6205 | INA | - | - | - | - | - | Tr 420x5 | - | 22.3 mm |
TGMSL-3-L-50 | TOKIMEC | - | - | - | - | - | - | - | - |
400x600x200 | - | - | - | - | - | - | - | - | - |
52% | - | - | - | - | - | - | - | - | - |
16mm/18mm | - | - | - | - | - | - | M 130x2 | - | - |
3racing | - | - | - | - | - | - | - | - | - |
62212-2RS1 | SKF | - | 4 mm | - | - | - | - | - | - |
A4VG90T13 | - | - | - | - | - | - | - | - | - |
2207-K-TVH-C3 | fag | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
160 | - | - | - | - | - | - | M 72x4 | 265 mm | - |
SH300-2 | INA | - | - | - | - | - | - | - | - |
7075 | - | - | - | - | - | - | - | - | - |
R210-7 | - | - | - | - | - | - | - | - | - |
J-35914 | - | - | - | - | - | - | - | - | - |
B500x10m | - | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - | - |
5mm-50mm | - | 14 mm | - | - | 20.75 mm | 23 mm | - | - | - |
6904RS | - | - | - | - | - | - | - | - | - |
3A | - | - | - | 10 mm | - | - | Tr 560x6 | - | - |
231.20.0500.503 Four Contact Ball Slewing Ring 434x640.8x56mm | Fillet Radius ra:2.00 mm; D:200.0000 mm; Oil Speed Rating n2:3400 rpm; Basic Dynamic Radial Load Rating C:124000 N; B:53.00 mm; Basic Static Radial Load Rating Co:52000 N; Grease Speed Rating n1:2800 rpm; d:110.000 mm; |
91-20 0941/1-07162 Four-point Contact Ball Slewing Bearing With External Gear | L:387.35 mm; A1:111.125 mm; N1:25.4 mm; Cap bolt recommended tightening torque:203.4 N·m; H2:44.45 mm; P60°:136 kN; R1:58.737 mm; Da:180 mm; Taconite seal:TER 103; h:42.069 mm; |
XU060111 Cross Roller Bearing 76.2x145.79x15.87mm | Basic dynamic load rating C:44 kN; Fatigue load limit Pu:17 kN; Mass bearing:0.085 kg; Radial shaft seal with a low cross-sectional height, double lip:SD 45x52x4; r min.:0.8 mm; Fw:45 mm; Reference speed:4500 r/min; Limiting speed:5600 r/min; Basic static load rating C0:140 kN; D:52 mm; |
116752 Bearing 260x480x60mm | d2 ≈:782 mm; D1 ≈:942 mm; Calculation factor Y2:2.7; Basic dynamic load rating C:16381 kN; Calculation factor e:0.37; Calculation factor Y1:1.8; Mass bearing + sleeve:1730 kg; Calculation factor Y0:1.8; G:Tr 710x7; Basic static load rating C0:29000 kN; |
A8-17P1DU Four Point Contact Ball Slewing Bearings SLEWING RINGS | P60°:234 kN; H:377.825 mm; Adapter sleeve assembly:SNW 136x6.5/16; Ca:121.818 mm; Stabilizing ring:SR-36-30; da:160.338 mm; J min.:530.225 mm; ba:88.106 mm; Cap bolt:4 x 3/4-10 UNC; PosiTrac Plus contact element:2 x B10724-148; |
CRBF8022AT Cross Roller Bearing 80x165x22mm | Initial grease fill:793.8 g; R1:104.775 mm; H1:169.875 mm; Labyrinth ring:2 x LOR 154; h:47.625 mm; A1:158.75 mm; Adapter sleeve assembly:SNW 3038x6.7/8; P120°:133 kN; da:174.625 mm; Housing:SSAFS 038 KA; |
RKS.060.25.1754 Slewing Bearing Without Gear 1646x1862x68mm | P180°:103 kN; P120°:94.3 kN; PG:1/4 NPT; R1:87.313 mm; Taconite seal:TER 139; Eye bolt:3/8-16 UNC; P90°:149 kN; da:149.225 mm; H:305.594 mm; J min.:396.875 mm; |
CRBF8022ADUU High Precision Crossed Roller Bearing | d:1000 mm; A:15 mm; Nut for removal:HM 31/1060; B1:525 mm; G2:G 1/4; d1:950 mm; Mass withdrawal sleeve:485 kg; Hydraulic nut:HMV 212 E; B2:547 mm; G:Tr 1060x8; |
9166468 Swing Bearing For HITACHI ZX330LC Excavator | Accessories:One Seal; Basic Static Radial Load Rating Co:1360 N; Fillet Radius ra:0.30 mm; B:7.00 mm; d:8.000 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Dynamic Radial Load Rating C:3250 N; Sealed Speed Rating n3:23000 rpm; D:22.0000 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; |
VU 140325 Four Point Contact Slewing Ring Slewing Bearing | B:23.00 mm; D:90.0000 mm; Basic Static Radial Load Rating Co:11200 N; d:50.000 mm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:33800 N; |
1787/2650G2 Slewing Beairng Video