No. | Brand | C | K | A | T | a | G | h | b |
XJ900 | - | - | - | - | - | - | - | 212.5 mm | - |
E0 | - | - | - | - | - | - | - | - | - |
505 | - | - | - | - | - | - | - | - | - |
6208-ZZC3 | koyo | - | - | - | - | - | - | - | - |
ABEC-3 | - | - | - | - | - | - | - | - | - |
6304 | koyo | - | - | - | - | - | - | - | - |
NJ218 | NSK | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
2x | TRW | - | 4.5 mm | - | - | - | - | - | 8.3 mm |
6K | - | 26 mm | - | - | 35 mm | 35 mm | - | - | - |
K50X58X20 | NTN | - | - | - | - | 22.1 mm | - | - | - |
52% | - | - | - | - | - | - | - | - | - |
(An836) | - | - | - | - | - | - | - | - | mm |
Q1 | - | - | - | - | - | - | - | - | - |
(JU100XP0) | - | - | - | - | 669.925 mm | - | - | - | - |
2 | FAFNIR | - | - | - | - | - | - | 52.388 mm | - |
1 | Bower | - | - | - | - | - | - | - | - |
3865 | INA | - | - | - | - | - | - | - | - |
ABEC-7 | - | - | - | - | - | - | - | - | - |
6207 | - | - | - | - | - | - | - | - | - |
RM85 | - | - | - | - | - | - | - | - | - |
013.40.1200 Slewing Bearing | d:340.000 mm; Grease Speed Rating Open/Shielded n1:1100 rpm; D:460.0000 mm; Oil Speed Rating Open/Shielded n2:1400 rpm; B:56.00 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:415000 N; Sealed Speed Rating n3:700 rpm; Basic Dynamic Radial Load Rating C:281000 N; Accessories:Without Accessories; |
124.25.560 Slewing Bearing | Housing:SSAFS 238; Ca:101.803 mm; Mass pillow block:213 kg; S:4.763 mm; H2:79.375 mm; Stabilizing ring:SR-38-32; P180°:160 kN; A1:190.5 mm; Cap bolt:1 1/8-7 UNC; Cap bolt, SAE grade:8; |
Cross Roller Bearings Harmonic Drive Bearings BCSG-40 (24x126x24)mm | d:130.000 mm; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating C:221000 N; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:2600 rpm; B:40.00 mm; D:230.0000 mm; Basic Static Radial Load Rating Co:232000 N; Fillet Radius rb:1.00 mm; |
20 mm x 52 mm x 15 mm Excavator Slewing Ring For KOMATSU PC220LC-8, Part Number:206-25-00301 | Grease Speed Rating n1:8000 rpm; d:25.000 mm; Accessories:Two Shields & Snap-R; B:22.20 mm; Basic Static Radial Load Rating Co:14000 N; D:52.0000 mm; Sealed Speed Rating n3:8000 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:20800 N; Oil Speed Rating n2:11000 rpm; Size (mm):20 mm x 52 mm x 15 mm ; |
Slewing Ring For Excavator KOBELCO SK480LC-6E, Part Number:LS40F00003F1 | J1:95.25 mm; H:336.55 mm; P60°:226 kN; Appropriate attachment bolt size G:1 in; P180°:94.3 kN; P90°:136 kN; Initial grease fill:793.8 g; Taconite seal:TER 116; N1:28.575 mm; P150°:78.3 kN; |
227-6087 Swing Bearing For Caterpillar 325CL Excavator | Initial grease fill:382.73 g; da:133.35 mm; R1:79.375 mm; ba:56.356 mm; Mass pillow block:67.6 kg; L:466.725 mm; RG:1/2 NPT; PG:1/4 NPT; P150°:68.1 kN; Cap bolt:2 x 1-8 UNC; |
R8-39E3 Crossed Roller Slewing Rings With External Gear | Basic Static Radial Load Rating Co:18600 N; B:19.00 mm; Accessories:One Shield & Snap-Ri; D:72.0000 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Dynamic Radial Load Rating C:29200 N; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; d:20.000 mm; |
1798/1100G2 Slewing Beairng | da min.:66 mm; Basic static load rating C0:12.2 kN; r1,2 min.:1.1 mm; Calculation factor f2C:1.06; r3,4 min.:0.6 mm; Calculation factor f1:0.99; D1:82.22 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; d1:72.74 mm; B:18 mm; |
1797/2100G2 Bearing 2100x2700x180mm | Dimension A2:0.5938 in; Distance J:2.7500 in; Height T:1.5313 in; Diameter N:0.5370 in; Dimension DA:2.9375 in; Basic Dynamic Radial Load Rating:2520 lbf; Basic Static Radial Load Rating Co:1750 lbf; Shaft Diameter D:1 in; Weight W:0.71 lb; Dimension L:3.7500 in; |
HS6-29P1Z Slewing Ring 25'' Bore Four Point Contact Ball Bearing | l4 max.:106 mm; l7 min.:24 mm; Mass rod end:0.34 kg; Basic static load rating C0:57 kN; α:9 °; d2 max.:54 mm; r1 min.:0.3 mm; l5 ≈:16 mm; l3 min.:30 mm; Specific dynamic load factor K:300 N/mm²; |
131.25.700 Slewing Bearing Video