| No. | Brand | C | K | A | T | a | G | h | b |
| 6216C3 | NSK | - | - | - | - | - | - | - | - |
| Bearing,2-Bolt,Ball,25mm | NTN | - | - | - | - | - | - | - | - |
| 688 | - | - | - | - | - | - | - | - | - |
| 3racing | - | - | - | - | - | - | - | - | - |
| A100 | - | - | - | - | - | - | - | - | - |
| 76.90 | - | - | - | - | - | - | - | - | - |
| 100cc | INA | - | - | - | - | - | - | 46.038 mm | - |
| CL200 | - | - | - | - | - | 11.2 mm | - | - | - |
| G10 | - | - | - | - | - | - | - | - | - |
| A4812ss | Thomson | - | - | - | - | - | - | - | - |
| TC1135 | - | - | 7.5 mm | - | - | - | - | - | - |
| SC46 | - | - | - | - | - | - | - | 56.356 mm | - |
| 208K | Timken | - | - | - | - | - | - | - | - |
| 16mm | - | - | - | 45 mm | - | - | - | - | - |
| 23144-BE-XL-K-C4 | fag | - | - | - | - | - | - | - | - |
| 10W | - | - | - | - | - | - | M 52x3 | 195 mm | - |
| AT21_/CT21_ | INA | - | - | - | - | - | - | - | - |
| 6801 | - | - | - | - | - | - | - | - | - |
| 61952 | - | - | - | - | - | - | - | - | - |
| 500 | - | - | - | - | - | - | - | - | - |
| 7783-20-2 | - | 52.375 mm | - | - | - | - | - | - | - |
| A18-89P1 Four Point Contact Ball Slewing Bearings SLEWING RINGS | Limiting speed:360 r/min; Da max.:1172 mm; Mass bearing:2270 kg; B:438 mm; Calculation factor e:0.35; D1 ≈:1028 mm; D:1220 mm; r1,2 min.:12 mm; Calculation factor Y2:2.9; Fatigue load limit Pu:1700 kN; |
| Slewing Ring For Excavator KOBELCO SK300LC, Part Number:2425U262F1 | D1 ≈:289 mm; Basic dynamic load rating C:1530 kN; G:M 190x3; Operating clearance factor k2:0.104; ra max.:3 mm; Basic static load rating C0:2200 kN; d1:170 mm; s1 max.:27.3 mm; B2 ≈:146 mm; Misalignment factor k1:0.107; |
| L6-22N9Z Four-point Contact Ball Slewing Rings With Internal Gear | da max.:250 mm; Mass bearing + sleeve:30 kg; Basic dynamic load rating C:1120 kN; D1 ≈:285 mm; D:310 mm; Limiting speed:2400 r/min; Da max.:299 mm; Basic static load rating C0:1730 kN; B1:120 mm; ra max.:2 mm; |
| VRT 1045A Cross Roller Table 20x45x8mm | d1:360 mm; A:9 mm; G2:G 1/4; B2:294 mm; B1:284 mm; G1:42 mm; Hydraulic nut:HMV 80 E; Nut for removal:HM 3180; G:Tr 400x5; d:380 mm; |
| 112.40.2800.12K Bearing 2625x3388x150mm | B:21.00 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:44000 N; d:55.000 mm; Basic Dynamic Radial Load Rating C:48400 N; Grease Speed Rating Open/Shielded n1:5200 rpm; D:100.0000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Accessories:Without Accessories; |
| VSA200544N Slewing Bearings (472x640.3x56mm) Turntable Bearing | Limiting speed:6300 r/min; DN:6.5 mm; A:32.5 mm; N:11.5 mm; SWN:7 mm; Hexagonal key size for grub screw N:3.969 mm; d:28.575 mm; H:141.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; End cover:ECY 206; |
| NRXT14025DD/ Crossed Roller Bearings (140x200x25mm) | d:85.000 mm; D:150.0000 mm; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:142000 N; Grease Speed Rating n1:2600 rpm; B:49.20 mm; Basic Static Radial Load Rating Co:176000 N; Accessories:One Shield; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2600 rpm; |
| CRBD 11528 B Cross Roller Bearing 115x240x28mm | A3:42.875 mm; A2:28.575 mm; Mass locking plate:0.26 kg; Hexagonal head bolts:2 x 5/8-11x1; A1:42.062 mm; B:3.175 mm; L:158.75 mm; |
| A14-33N1 Four Point Contact Ball Slewing Bearing With Inernal Gear | Sealed Speed Rating n3:1800 rpm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:225000 N; Basic Static Radial Load Rating Co:200000 N; d:100.000 mm; B:60.00 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; Oil Speed Rating Open/Shielded n2:3100 rpm; D:265.0000 mm; Fillet Radius ra:3.00 mm; |
| 787/1628G Slewing Bearing 1628*1923*130mm | d:140 mm; d1:280 mm; B:28.5 mm; Mass shaft washer:10.6 kg; r1,2 min.:4 mm; |
124.28.1000 Slewing Bearing Video