| CRBC 08016 Crossed Roller Bearings 80x120x16mm Industrial Robots Arm Use | ra max.:1 mm; Fatigue load limit Pu:0.22 kN; Mass bearing:0.12 kg; a:12.2 mm; Attainable speed for grease lubrication:39000 r/min; Basic dynamic load rating C:9.36 kN; Calculation factor f:1.05; Db max.:50.8 mm; Preload class B GB:150 N; da max.:37.8 mm; |
| HD800-7 Slewing Bearing | b:8 mm; Mass lock nut:0.35 kg; h:3.5 mm; d3:98 mm; Associated spanner:HN 15; Recommended grub screw tightening torque:8 N·m; Axial static load carrying capacity:134 kN; B3:3 mm; Grub (set) screw size:M6; G:M 75x2; |
| 789/1350 Bearing 1350x1585x72mm | PG:1/8 NPT; Appropriate attachment bolt size G:0.625 in; Da:140 mm; N1:19.05 mm; J max.:279.4 mm; Cap bolt, SAE grade:8; Pa:14.7 kN; Bearing:22313 E; A1:88.9 mm; Mass pillow block:17 kg; |
| 29 mm x 53 mm x 37 mm 131.40.1400 Slewing Bearing | Db max.:66 mm; db min.:44.6 mm; Static axial stiffness, preload class A:96 N/µm; Calculation factor f2B:1.02; Preload class A GA:100 N; Static axial stiffness, preload class D:214 N/µm; Calculation factor f1:0.99; d:40 mm; D1:58.8 mm; Fatigue load limit Pu:0.44 kN; Size (mm):29 mm x 53 mm x 37 mm ; |
| Produce CRB700150 Crossed Roller Bearing,CRB700150 Bearing Size 700X1020X150mm | d:600 mm; A:9 mm; Hydraulic nut:HMV 126 E; B1:310 mm; Mass withdrawal sleeve:86.5 kg; G:Tr 630x6; Nut for removal:HM 31/630; G2:G 1/4; d1:570 mm; G1:38 mm; |
| 797/1370G Bearing 1370x1840x160mm | J min.:263.525 mm; Bearing limiting speed:5300 r/min; P90°:94.3 kN; H2:41.275 mm; Da:160 mm; A2:149.225 mm; Cap bolt, SAE grade:8; Bearing:22218 EK; P150°:54.3 kN; PG:1/8 NPT; |
| XU060094 Crossed Roller Slewing Ring Slewing Bearing | Da:180 mm; End plug (suffix Y):EPR 14; H:222.25 mm; Stabilizing ring:2 x 38151-24; da:101.6 mm; Housing:SAFS 024 KA-11; P120°:64.9 kN; Bearing limiting speed:4000 r/min; P90°:105 kN; P60°:175 kN; |
| 010.30.630 Slewing Bearing | Sealed Speed Rating n3:780 rpm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:500000 N; d:300.000 mm; Basic Dynamic Radial Load Rating C:358000 N; Grease Speed Rating Open/Shielded n1:1200 rpm; Oil Speed Rating Open/Shielded n2:1500 rpm; D:460.0000 mm; B:74.00 mm; Accessories:Seal & Snap-Ring; |
| LC40F00003F1 Swing Bearing For KOBELCO SK290LC VI Excavator | Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2500 rpm; B:52.00 mm; Basic Static Radial Load Rating Co:166000 N; Fillet Radius ra:3.00 mm; d:85.000 mm; D:210.0000 mm; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:190000 N; |
| L6-37E9Z Four-point Contact Ball Slewing Rings With External Gear | Basic dynamic load rating C:1205 kN; Da max.:541 mm; Limiting speed:900 r/min; da max.:482 mm; C:57.15 mm; Reference speed:670 r/min; Cb min.:17 mm; r3,4 min.:6.4 mm; d:457.2 mm; Fatigue load limit Pu:228 kN; |