| No. | Brand | C | K | A | T | a | G | h | b |
| 2MM9113WICR | FAFNIR | - | - | - | 210 mm | - | - | - | - |
| 70 | - | - | - | - | - | - | - | - | - |
| SB-1730631 | DAIKIN | - | - | 57.15 mm | - | - | - | - | - |
| 6005 | Nachi | - | - | - | - | - | - | - | - |
| pc200-6 | INA | - | - | - | - | - | - | - | - |
| 5-Ply | - | - | - | - | - | - | - | - | - |
| 2mm | - | - | - | - | - | - | - | - | - |
| New10pcs | - | - | - | - | - | - | - | - | - |
| PC1250-7 | INA | - | - | - | - | - | - | - | - |
| SAE4140 | - | - | - | - | - | - | - | - | - |
| 6000 | fag | - | - | - | - | - | - | 46.038 mm | - |
| 15mm, | - | - | - | - | - | - | - | - | - |
| Mmfo25c | - | - | - | - | - | - | - | - | - |
| ISO9001-2008 | - | - | - | - | - | - | M 50x1.5 | 2.5 mm | 6 mm |
| 3723572220 | Rexroth | - | - | - | - | - | 199.314 mm | - | - |
| 95% | - | - | - | - | - | - | - | - | - |
| 650 | koyo | - | - | - | - | - | - | - | - |
| 2017 | INA | - | - | - | - | - | - | - | - |
| 17Pcs | - | - | - | - | - | - | - | - | - |
| MB:W211,S211,C219,C204,R230,R231,S204,C209,W204,R171,A209 | - | - | - | - | - | - | - | - | - |
| 21975 | - | - | - | - | - | - | Tr 710x7 | - | - |
| 850 | - | - | - | - | - | - | - | - | - |
| P3105L00C1C20PA00D00S1A1P/312, | Parker | - | - | - | - | - | - | - | - |
| (YD-004) | - | - | 4 mm | - | - | - | - | - | - |
| HM218210 | Timken | - | - | - | 178.592 mm | - | - | - | - |
| 18 | INA | - | - | - | - | - | - | - | - |
| 825 | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 10way | - | - | - | - | - | - | - | - | - |
| 010.30.630.05 Slewing Bearing | Oil:79 000 min-1; Da:4.8 max; rs:0.1 mm; Weight:0.0004 kg; da:3.2 min; Dynamic (Cr):0.279 kN; d:2 mm; B:2.3 mm; D:6 mm; Bearing designation:619 / 2 ; |
| Slewing Ring For Excavator HITACHI EX120-5, Part Number:9102726 | Mass pillow block:21.3 kg; Adapter sleeve assembly:SNW 18x3.3/16; J min.:263.525 mm; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; P180°:42.3 kN; Da:160 mm; H2:41.275 mm; h:38.1 mm; A1:98.425 mm; |
| CRBF 108 AT UU C1 P5 Crossed Roller Bearings 10x52x8mm With Mounting Hole | s1 max.:24.6 mm; B:375 mm; Basic static load rating C0:23200 kN; Ca min.:5.5 mm; Limiting speed:450 r/min; Operating clearance factor k2:0.097; Misalignment factor k1:0; d2 ≈:697 mm; r1,2 min.:7.5 mm; Fatigue load limit Pu:1460 kN; |
| VU200260 Slewing Bearings (191x329x46mm) Machine Tool Bearing | d:12 mm; Permissible sliding velocity v max.:1 m/s; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:80 N/mm²; Coefficient of friction µ max.:0.15; B:12 mm; Specific dynamic load factor K:40 N/mm²; Coefficient of friction µ min.:0.06; Tolerance shaft:h9; D:14 mm; |
| XU120222 Cross Roller Bearing Manufacturer 140x300x36mm | D:210.0000 mm; d:150.000 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Grease Speed Rating Open/Shielded n1:2800 rpm; Basic Dynamic Radial Load Rating C:88400 N; Basic Static Radial Load Rating Co:93000 N; Sealed Speed Rating n3:1800 rpm; B:28.00 mm; Accessories:Two Seals; Fillet Radius ra:2.00 mm; |
| 232.20.1000.013 Four Contact Ball Slewing Ring 986x1198x56mm | Mass withdrawal sleeve:265 kg; G1:50 mm; d:850 mm; Hydraulic nut:HMV 180 E; d1:800 mm; B1:415 mm; G2:G 1/4; B2:445 mm; Nut for removal:HM 31/900; G:Tr 900x7; |
| MTO-050 Slewing Bearings(50x110x20mm) (1.968x4.331x0.787inch) Without Gear | Threads per inch:8; d3 max.:230.327 mm; B1:163.728 mm; Hydraulic nut:HMVC 36E; d:180 mm; G:179.476 mm; d1:134.938 mm; Sleeve:S 136x5.5/16; Lock washer:W 36; Mass adapter sleeve assembly:10 kg; |
| RKS.060.20.0744 Slewing Bearing Without Gear 672x816x56mm | Fillet Radius ra:0.64 mm; Speed Rating-Single and Double Sealed Grease SDG:13000 rpm; Basic Interchange FAF:202KLD3; Basic Interchange BCA:87016; Basic Interchange NDH:87016; D:35.0000 mm; d:16.000 mm; Basic Radial Load Rating-Dynamic DC:7610 N; Old MRC Bearing Number:202FSF4; Width - Overall B:12.7 mm; |
| MTO-065T Slewing Bearings(65x135x22mm) (2.559x5.315x0.866inch) Without Gear | Grease Speed Rating n1:12000 rpm; D2R:33.200 mm; B:15.9 mm; Sealed Speed Rating n3:12000 rpm; Basic Dynamic Radial Load Rating C:11400 N; Accessories:Two Shields; D:35.0000 mm; Fillet Radius ra:0.64 mm; d:15.000 mm; Basic Static Radial Load Rating Co:6800 N; |
| 797/1200G2 Bearing 1200x1520x90mm | Dynamic (Ca):383 kN; E:mm; F:229 mm; Pu:48.900 kN; d2 (max):mm; rs (min):2.1 mm; d2:200 mm; D:310 mm; Static (Coa):531 kN; b:mm; |
VSA250755-N Slewing Bearing Manufacturer 655x898x80mm Video