| No. | Brand | C | K | A | T | a | G | h | b |
| 6204 | Nachi | - | - | - | - | - | M 150x2 | - | - |
| 33122JR | - | - | - | - | - | - | - | - | - |
| 6702ZZ | - | - | - | - | - | - | 84.836 mm | - | - |
| 204 | SKF | - | - | - | - | - | - | - | - |
| Fe6- | - | - | - | - | - | - | - | - | - |
| ABEC-7 | - | - | - | - | - | - | - | - | - |
| DX120 | INA | - | - | - | - | - | - | - | - |
| 207-27-00510 | - | - | 9 mm | - | - | - | - | - | 16.7 mm |
| 30211 | Timken | - | - | - | - | - | - | - | - |
| 32 | - | - | 6 mm | - | - | - | - | - | 11.1 mm |
| (9mm/12mm/15mm/17mm/18mm/21mm) | - | - | - | - | - | - | - | - | - |
| 2k | - | - | - | - | - | 16.111 mm | - | - | - |
| PRM3PA07LN-32 | Parker | - | - | - | - | - | - | - | - |
| 3A | - | - | - | 10 mm | - | - | Tr 560x6 | - | - |
| 10 | - | - | - | - | - | 4 mm | - | 96.5 mm | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| SK320-6 | - | 670 mm | 12 mm | - | - | - | - | - | - |
| 516007 | Timken | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| (4) | - | - | - | - | - | - | - | - | - |
| Z400 | - | - | - | - | - | - | - | - | - |
| S7019CE/HCP4A | SKF | - | - | - | - | - | - | - | 6 mm |
| 3A | - | - | - | - | - | - | - | - | - |
| 6004-2RLD-C3 | - | - | - | - | - | - | - | - | - |
| R20 | - | - | - | - | - | - | - | - | - |
| MB5243XP | - | - | - | - | - | - | M 45x1.5 | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 1-5pcs | - | - | - | - | - | - | - | - | - |
| pc200-7 | INA | - | - | - | - | 12.5 mm | - | - | - |
| VSI250955N Slewing Bearings (810x1055x80mm) Turntable Bearing | d1 ≈:160 mm; R:125 mm; Reference speed:1700 r/min; H1:45 mm; D2:135 mm; D3:165 mm; Da max.:135 mm; C:14 mm; Basic dynamic load rating C:125 kN; Mass bearing (including seat washer where applicable):2.91 kg; |
| VSI 200844-N Four Point Contact Slewing Ring | Oil:4 200 min-1; Static (Cor):92.600 kN; Da:169 max; Grease:3 500 min-1; ra:2 max; Dynamic (Cr):123.000 kN; Weight:3.13 kg; da:112 min; B:34 mm; Pu:3.557 kN; |
| RA12008 Cross Roller Bearing 120x136x8mm | ra max.:3 mm; Basic static load rating C0:216 kN; Reference speed:3800 r/min; Limiting speed:5000 r/min; r3,4 min.:3 mm; B:33.5 mm; Fatigue load limit Pu:25.5 kN; Mass bearing:2.19 kg; Ca min.:4 mm; Calculation factor Y:0.68; |
| 123.25.630 Slewing Bearing | Grease:10950 kN; Static (Cor):22.3 mm; with cylindrical bore:320 min-1; with tapered bore:380 min-1; d:460 mm; Dynamic (Cr):12 mm; D:760 mm; Pu:5720 kN; rs (min):7.5 mm; B:240 mm; |
| RKS.060.20.1094 Slewing Bearing Without Gear 1022x1116x56mm | a:218 mm; Cb min.:50 mm; Ca min.:10 mm; Calculation factor Y:1.05; C:160 mm; Db min.:804 mm; B:190 mm; r1,2 min.:7.5 mm; da max.:530 mm; Basic static load rating C0:10200 kN; |
| CSG(CSF)-14 Cross Roller Bearing, Harmonic Drive Bearing, Harmonic Reducer Bearing, Robot Bearing | Static (Cor):108.000 kN; Dynamic (Cr):110.379 kN; ra:2 max; da:65 min; Pu:4.909 kN; Da:110 max; Bearing designation:3311 ; D:120 mm; B:49.2 mm; d:55 mm; |
| SD.1100.32.00.C Four Contact Ball Slewing Ring 805x1100x90mm | Weight W:0.61 kg; Basic Dynamic Radial Load Rating:25500 N; Pin Dia BS:1/2; Basic Static Radial Load Rating Co:15300 N; Insert Bearing IB:ZMaRC; Dimension N:10.4 mm; Distance H:31.8 mm; Shaft Diameter D:35 mm; Dimension S1:25.4 mm; Dimension F:14.3 mm; |
| CRB40035UUCO/CRB40035 Precision Cross Roller Bearing 400*480*35mm | Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; B:68.00 mm; D:180.0000 mm; d:100.000 mm; Oil Speed Rating n2:3200 rpm; Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:251000 N; Basic Static Radial Load Rating Co:285000 N; |
| Slewing Ring For Excavator HITACHI EX135US, Part Number:9102726 | Basic Dynamic Radial Load Rating C:119000 N; B:52.40 mm; Sealed Speed Rating n3:3800 rpm; d:55.000 mm; Fillet Radius ra:2.00 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:122000 N; Oil Speed Rating n2:5000 rpm; Grease Speed Rating n1:3800 rpm; D:120.0000 mm; |
| 9E-1Z30-0461-0126 Crossed Roller Slewing Ring | P150°:26.7 kN; RG:3/8 NPT; H1:95.25 mm; Ca:45.796 mm; R1:53.975 mm; Max. speed for Taconite seal:1050 r/min; P180°:32 kN; Bearing:22217 EK; Taconite seal:TER 53; End plug (suffix Y):EPR 9; |
121.50.3150 Slewing Bearing Video