No. | Brand | C | K | A | T | a | G | h | b |
17mm | - | - | - | - | - | - | - | - | - |
9mm | - | - | - | - | - | - | - | - | - |
20 | - | - | - | - | - | - | - | - | - |
V10F | - | - | - | - | - | - | - | - | - |
25-150 | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | 11 mm |
1992-1994 | Timken | - | - | - | - | - | - | - | - |
1220*2440*18mm | - | - | - | - | - | - | - | - | - |
ZAX120 | - | - | - | - | - | - | - | - | - |
200GT | - | - | - | - | - | - | - | - | - |
6205 | INA | - | - | - | - | - | Tr 420x5 | - | 22.3 mm |
A5 | Bower | - | - | - | - | - | - | - | - |
IEC60065 | - | - | - | - | - | - | - | - | - |
10inch | - | - | - | - | - | - | - | - | - |
LPVD64 | - | - | - | - | - | - | - | 42.862 mm | - |
HA594181 | Timken | - | - | - | - | - | - | - | - |
TB0080FM110AAA | Parker | - | - | - | - | - | - | - | - |
D66 | - | - | 9 mm | - | - | - | - | - | 16.7 mm |
Zx75 | Hitachi | - | - | - | - | - | - | - | - |
No.12125-02-9 | - | - | - | - | - | - | - | - | - |
22209CC/W33 | INA | - | - | 45 mm | - | - | - | - | - |
VSA200644-N Slewing Bearing 572x742.3x56mm | B:9.00 mm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:2850 N; D:32.0000 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:5590 N; Oil Speed Rating Open/Shielded n2:28000 rpm; Grease Speed Rating Open/Shielded n1:22000 rpm; Sealed Speed Rating n3:14000 rpm; Fillet Radius ra:0.30 mm; |
EX120-5 Slewing Bearing | Oil Speed Rating n2:9500 rpm; Accessories:One Seal; Grease Speed Rating n1:7000 rpm; Basic Static Radial Load Rating Co:20400 N; B:27.00 mm; D:62.0000 mm; Sealed Speed Rating n3:7000 rpm; Basic Dynamic Radial Load Rating C:28600 N; d:30.000 mm; Fillet Radius ra:1.00 mm; |
NRXT2508 High Precision Cross Roller Ring Bearing | Threads per inch:8; d3 max.:204.927 mm; B:26.441 mm; Lock nut:AN 32; Hydraulic nut:HMVC 32E; B4:30.15 mm; Sleeve:S 32x5.3/8; Mass adapter sleeve assembly:7.05 kg; Lock washer:W 32; d1:136.525 mm; |
11-250555/1-04120 Four-point Contact Ball Slewing Bearing With External Gear | B:17.00 mm; Basic Dynamic Radial Load Rating C:29700 N; Accessories:One Shield & Snap-Ri; d:35.000 mm; Basic Static Radial Load Rating Co:22800 N; Grease Speed Rating Open/Shielded n1:7800 rpm; Oil Speed Rating Open/Shielded n2:9500 rpm; Fillet Radius ra:1.00 mm; D:72.0000 mm; |
7797/1660G Slewing Bearing | +:0.2 mm; das:197 mm; C1:107.2 mm; C:121 mm; B:122 mm; D3:254 mm; K:4 mm; b1:7 mm; Mass bearing:22.5 kg; Ca1:99 mm; |
RU 85 Crossed Roller Bearing 55x120x15mm | Dimension S1:1.0000 in; Shaft Diameter D:1 1/4 in; Basic Static Radial Load Rating Co:2520 lbf; Dimension N:0.7813 in; Dimension C:3.5000 in; Dimension G:0.3750 in; Dimension H:1.1563 in; Dimension J:1.6250 in; Dimension L:4.3750 in; Dimension D2:2.7500 in; |
RA17013C Crossed Roller Bearings 170x196x13mm | d1:495.3 mm; d:530 mm; Threads per inch:4; B:68.656 mm; Hydraulic nut:HMVC 106E; Locking plate:PL 530; Mass adapter sleeve assembly:120 kg; B1:268.707 mm; G:529.006 mm; B5:82.55 mm; |
VRT 2080A Cross Roller Table 30x80x12mm | Initial grease fill:141.75 g; P60°:157 kN; Pa:10.9 kN; L:349.25 mm; Housing:FSAFS 518; Da:160 mm; End plug (suffix Y):EPR 11; H1:101.6 mm; h:38.1 mm; Cap bolt recommended tightening torque:149.1 N·m; |
HS6-16P1Z Slewing Bearings (12x20.4x2.2inch) Without Gear | Oil Speed Rating n2:38000 rpm; Grease Speed Rating n1:32000 rpm; B:6.00 mm; Basic Dynamic Radial Load Rating C:2510 N; Fillet Radius ra:0.30 mm; d:6.000 mm; D:19.0000 mm; Basic Static Radial Load Rating Co:480 N; |
RB19025UUCC0 High Precision Cross Roller Ring Bearing | Calculation factor kr:0.2; D1 ≈:280.8 mm; Fatigue load limit Pu:196 kN; d1 ≈:221.9 mm; E:300 mm; ra max.:3 mm; da min.:177 mm; Basic dynamic load rating C:1400 kN; D:340 mm; Mass bearing:50.5 kg; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
121.40.2240 Slewing Bearing Video