| No. | Brand | C | K | A | T | a | G | h | b |
| 4TNV84 | - | - | - | - | - | - | - | 46.038 mm | - |
| 35x12.50R17LT | - | - | - | - | - | 4.5 mm | - | - | - |
| TFE9184 | - | - | - | - | - | - | - | - | - |
| 50Mn | - | - | - | - | - | - | - | - | - |
| 80 | - | - | - | - | - | - | - | - | - |
| YZ-027 | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | 7.5 mm | - | - | - | - | - | - |
| 62212 | - | - | - | - | - | - | - | - | - |
| 6207-2RS1NR/QE6 | SKF | - | - | - | - | - | - | - | - |
| 21317EXW33 | Nachi | - | - | - | - | - | Tr 600x6 | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 61809 | NSK | - | - | - | - | - | - | - | - |
| (OWCT-22) | - | - | 12 mm | - | - | - | - | - | 22.3 mm |
| 221-8859 | INA | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 40-60 | - | - | - | - | - | - | - | - | - |
| 4WEH22HA70/6AW120-60 | Rexroth | - | - | - | - | - | - | 20 mm | 45 mm |
| FNYBU16LOPN | Thomson | - | - | 32.5 mm | - | - | - | - | - |
| VLU301455 Four Contact Ball Slewing Ring 1305x1600x90mm | Adapter sleeve assembly:SNW 11x1.7/8; Bearing limiting speed:7500 r/min; Labyrinth ring:2 x LER 23; P60°:35.6 kN; Initial grease fill:136.08 g; Cap bolt recommended tightening torque:149.1 N·m; L:279.4 mm; P150°:12 kN; Cap bolt, SAE grade:8; A2:123.825 mm; |
| RB20035UU High Precision Cross Roller Ring Bearing | Design (sliding contact surface combination):Steel/steel, heavy-d; D:35 mm; Basic static load rating C0:146 kN; Specific dynamic load factor K:100 N/mm²; Mass plain bearing:0.073 kg; α:6 °; da max.:24 mm; b1:3.1 mm; Basic dynamic load rating C:30 kN; d:20 mm; |
| XR820060 Cross Roller Bearing 580x760x80mm | Limiting speed:11000 r/min; da min.:44.2 mm; d1:35 mm; ra max.:1 mm; G:M 45x1.5; Reference speed:8000 r/min; Basic static load rating C0:86.5 kN; B:23 mm; da max.:52.4 mm; Da max.:73 mm; |
| YC60-8 Slewing Bearing | Width A:1.0000 in; Distance H:1.125 in; Dimension S1:0.7813 in; Dimension L:2.7500 in; Basic Dynamic Radial Load Rating:2520 lbf; Basic Static Radial Load Rating Co:1750 lbf; Dimension C:1.8125 in; Pin Dia BS:3/8; Distance J:1.6250 in; Dimension B:4.7500 in; |
| VSA 200544-N Four Point Contact Slewing Ring | Grease Speed Rating Open/Shielded n1:950 rpm; D:540.0000 mm; Sealed Speed Rating n3:600 rpm; d:400.000 mm; Basic Static Radial Load Rating Co:560000 N; Fillet Radius ra:4.00 mm; Accessories:One Shield; B:65.00 mm; Basic Dynamic Radial Load Rating C:345000 N; Oil Speed Rating Open/Shielded n2:1200 rpm; |
| 9O-1B20-0744-0341 Four Point Contact Ball Slewing Ring | Basic Dynamic Radial Load Rating:4380 lbf; Dimension L:6.2500 in; Dimension S1:0.8750 in; Dimension H2:0.7500 in; Distance JMIN:4.2500 in; Dimension A1:0.9844 in; Weight W:1.04 lb; Width A:1.5781 in; Shaft Diameter D:1 3/16 in; Insert Bearing IB:ZMaRC; |
| VLA200544N ZT Flange Slewing Ring 434x640.3x56mm | Basic Dynamic Radial Load Rating C:307000 N; D:215.0000 mm; Basic Static Radial Load Rating Co:380000 N; Oil Speed Rating n2:2800 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1900 rpm; B:94.00 mm; Fillet Radius ra:2.50 mm; d:100.000 mm; |
| XSU141094 Cross Roller Bearings (1024x1164x56mm) Slewing Ring Bearings | Mass bearing + sleeve:675 kg; da min.:420 mm; b:22.3 mm; D:820 mm; G:Tr 420x5; r1,2 min.:7.5 mm; B2 ≈:312 mm; Calculation factor e:0.3; Basic static load rating C0:10400 kN; Calculation factor Y1:2.3; |
| RB5013UU High Precision Cross Roller Ring Bearing | Calculation factor Y2:1.41; d2 ≈:37.81 mm; D1 ≈:56.37 mm; d1 ≈:46.33 mm; Reference speed:13000 r/min; rb max.:0.6 mm; Da max.:65 mm; Calculation factor X:0.67; r3,4 min.:0.6 mm; Calculation factor Y0:0.76; |
| RU 124 Crossed Roller Bearing 80x165x22mm | Calculation factor kr:0.025; ra max.:2 mm; B:28 mm; b:3.1 mm; Calculation factor f0:14.7; Basic static load rating C0:64 kN; d1 ≈:106.05 mm; C:4.9 mm; D2 ≈:134.3 mm; Fatigue load limit Pu:2.5 kN; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
121.28.1000 Slewing Bearing Video