| NRXT5013 Crossed Roller Bearing 50x80x13mm | da min.:32 mm; Da max.:55 mm; Fatigue load limit Pu:0.72 kN; d:25 mm; Calculation factor Y0:0.76; r1,2 min.:1.1 mm; d2 ≈:32.26 mm; Calculation factor X:0.41; Calculation factor A:0.00158; r3,4 min.:0.6 mm; |
| PC90-6 Slewing Bearing | Bearing:22236 CCK/W33; da:160.338 mm; N1:28.575 mm; A2:250.825 mm; P60°:234 kN; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Stabilizing ring:SR-36-30; H1:190.5 mm; P150°:75.6 kN; |
| R210-5 Bearings | Ca:107.798 mm; H2:85.725 mm; Mass pillow block:195 kg; J1:127 mm; L:749.3 mm; h:62.706 mm; da:180.975 mm; Eye bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:5; R1:122.237 mm; |
| 060.22.0370.301.11.1504 Single Row Ball Bearing Slewing Rings Ungeared | P60°:669 kN; Housing:SSAFS 640; Da:419.999 mm; L:869.95 mm; da:184.15 mm; P120°:249 kN; Cap bolt, SAE grade:8; Ca:147.803 mm; Cap bolt recommended tightening torque:4284.4 N·m; Pa:82.7 kN; |
| Slewing Ring For Excavator HITACHI EX300-5, Part Number:9166468 | P60°:535 kN; h:60.325 mm; P90°:320 kN; PG:1/4 NPT; Initial grease fill:1304.1 g; A1:180.975 mm; Bearing:22236 CCK/W33; Eye bolt:2 x 3/8-16 UNC; da:163.512 mm; Bearing limiting speed:2600 r/min; |
| 114.32.1250 Slewing Bearing | Basic static load rating C0:11.6 kN; Mass needle roller and cage assembly:0.007 kg; U:13 mm; Ew:20 mm; Basic dynamic load rating C:9.52 kN; Fatigue load limit Pu:1.34 kN; Reference speed:24000 r/min; Limiting speed:26000 r/min; Fw:15 mm; |
| 1797/2635G Bearing 2635x3440x270mm | Basic Dynamic Radial Load Rating C:59200 N; Oil Speed Rating n2:7000 rpm; Fillet Radius ra:1.50 mm; D:110.0000 mm; Basic Static Radial Load Rating Co:49000 N; Fillet Radius rb:1.00 mm; B:22.00 mm; d:60.000 mm; Grease Speed Rating n1:6000 rpm; |
| PC210-7 Slewing Bearing | Fillet Radius rb:0.60 mm; Fillet Radius ra:1.00 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:12100 N; Oil Speed Rating n2:56000 rpm; Grease Speed Rating n1:39000 rpm; B:13.00 mm; Basic Static Radial Load Rating Co:6550 N; D:42.0000 mm; |
| Wind Power Slewing Bearing 033.30.1487.03 China Double Row Ball Wind Turbine Slewing Bearing | Specific dynamic load factor K:25 N/mm²; h:19 mm; B:16 mm; D1:32 mm; Permissible sliding velocity v min.:0 m/s; Mass bushing:0.044 kg; Tolerance housing:H7; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; B1:4 mm; |
| 024.40.1400 Bearing 1224x1576x160mm | Distance JMIN:4.9375 in; Dimension H1:1.9375 in; Width A:1.8750 in; Dimension N:0.9688 in; Dimension A1:1.2500 in; Height H:3.9063 in; Dimension L:6.8750 in; Dimension N1:0.5625 in; Dimension H2:0.7500 in; Insert Bearing IB:Stainless Steel; |