| RU148UUCC0P5 High Precision Crossed Roller Bearing | Appropriate attachment bolt, rec. tightening torque:2280 N·m; A:395 mm; L:950 mm; Adapter sleeve:OH 3076/13.15/16 H; da:354.012 mm; N:50 mm; N4 max.:25 mm; Cap bolt, rec. tightening torque:600 N·m; H2:120 mm; Locating ring:2 x FRB 22.5/560; |
| RK6-29P1Z Slewing Ring Bearings Flanged Cross-section | J max.:247.65 mm; L:304.8 mm; S:0.794 mm; H1:79.375 mm; Mass bearing unit:11.6 kg; H2:47.625 mm; Basic dynamic load rating C:158 kN; Limiting speed:3400 r/min; d2:111.125 mm; B:92.075 mm; |
| NRXT7013 Crossed Roller Bearing 70x100x13mm | h:49.212 mm; R2:37.306 mm; Housing:SAFS 040 KA; R1:115.888 mm; Ca:95.809 mm; Mass pillow block:156 kg; H:358.775 mm; Stabilizing ring:2 x 38151-40; RG:3/4 NPT; da:182.563 mm; |
| A18-89E1 Four Point Contact Ball Slewing Bearing With External Gear | Da:319.999 mm; Housing:SAF 630; R1:114.3 mm; Bearing:22330 CCK/W33; H:377.825 mm; P90°:140 kN; J max.:600.075 mm; J1:117.475 mm; da:130.175 mm; Stabilizing ring:SR-36-30; |
| RA19013 Crossed Roller Bearings 190x216x13mm | Reference speed:14000 r/min; Basic dynamic load rating C:14.7 kN; U:13 mm; Mass needle roller and cage assembly:0.013 kg; Fatigue load limit Pu:2.85 kN; Limiting speed:16000 r/min; Basic static load rating C0:24.5 kN; Ew:33 mm; Fw:28 mm; |
| EX300-2 Slewing Bearing | B1:335 mm; Weight:1300 ; Pu:1579.250 kg; D:1090 mm; B:475 mm; Dynamic (Cr):10149 kN; Static (Cor):25200 ; d:750 mm; Bearing designation:PLC 512-56 ; |
| RE4510 Crossed Roller Bearings 45x70x10mm | P120°:160 kN; P180°:173 kN; J max.:708.025 mm; Housing:SAF 544; L:831.85 mm; A1:222.25 mm; Max. speed for Taconite seal:385 r/min; Cap bolt recommended tightening torque:400 N·m; Initial grease fill:2749.95 g; RG:1 NPT; |
| KOBELCO SK07-2 EXCAVATOR SLEWING RING, SWING BEARING, SWING CIRCLE | rb max.:0.6 mm; db max.:47 mm; Db max.:63.8 mm; Attainable speed for grease lubrication:36000 r/min; da min.:44.6 mm; Preload class A GA:65 N; D2:60.85 mm; Calculation factor fHC:1.01; Calculation factor f0:8.1; r1,2 min.:1 mm; |
| MTE-210 Slewing Bearing External Gear Teeth | d:60 mm; Basic static load rating C0:1560 kN; da max.:67 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; ra max.:1 mm; Mass plain bearing:2.04 kg; M:4 mm; rb max.:1 mm; r2 min.:1 mm; Material constant KM:330; |
| 25 mm x 62 mm x 17 mm 111.50.3150.12 Bearing 2922x3476x134mm | Pa:14 kN; da:68.263 mm; R2:26.988 mm; Cap bolt recommended tightening torque:515.2 N·m; Housing:SAF 616; S:4.763 mm; Ca:67.793 mm; H:209.55 mm; Taconite seal:TER 44; J min.:269.875 mm; Size (mm):25 mm x 62 mm x 17 mm ; |