No. | Brand | C | K | A | T | a | G | h | b |
KH1630 | INA | - | - | - | - | - | - | - | - |
1 | - | - | - | - | - | - | - | - | - |
P4Q-CA16 | Parker | - | - | - | - | - | - | 42.069 mm | - |
900 | fag | - | - | - | - | - | - | - | - |
33017 | Timken | - | - | - | - | - | M 160x3 | - | - |
285A | - | - | - | - | - | - | - | - | - |
702-21-57400 | - | - | - | - | - | - | - | - | - |
190g | - | - | - | - | - | - | - | - | - |
KMX32 | INA | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
2000 | - | - | - | - | - | - | - | - | - |
4] | - | - | - | - | - | - | - | - | - |
6301-2RS | fag | - | - | - | - | - | M 52x3 | 195 mm | - |
4 | - | - | - | - | - | - | - | - | - |
3mm | - | - | - | - | - | - | - | - | - |
CR4136XP | - | - | - | - | 37 mm | 40.982 mm | - | - | - |
N314-E-TVP2-C3 | fag | - | - | - | - | - | - | - | - |
PC300-7 | - | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | 34.925 mm | - |
AH-313-60 | SKF | - | - | - | - | - | - | - | - |
35x62x14 | NTN | - | - | - | - | - | - | - | - |
011.25.1461.000.11.1503 | - | - | - | - | - | - | - | - | - |
516007 | Timken | - | - | - | - | - | - | - | - |
206 | - | - | - | - | - | - | - | - | - |
22311CCK | SKF | - | - | - | - | - | - | - | - |
1U3513 | - | - | - | - | - | - | - | - | - |
636-2 | - | - | - | - | - | - | - | - | - |
5pcs | - | - | - | - | - | - | M 85x2 | - | - |
CS50 | - | - | 12 mm | - | - | - | - | - | - |
CRBE 09025 A Cross Roller Bearing 90x210x25mm | d:150 mm; Calculation factor Y1:1.5; Db min.:216 mm; T:112 mm; K:3 mm; Reference speed:1800 r/min; rc max.:1 mm; Calculation factor Y2:2.2; ra max.:3 mm; Basic static load rating C0:1320 kN; |
XV90 Cross Roller Bearing 90x145x19mm | Oil:3 500 min-1; rs:3 mm; Dynamic (Cr):185.000 kN; Bearing designation:6321 ; B:49 mm; Static (Cor):153.000 kN; Weight:8 kg; ra:2.5 max; Grease:3 000 min-1; D:225 mm; |
1797/3230G2Y Bearing 3230x4100x240mm | Dimension J:1.9375 in; Basic Dynamic Radial Load Rating:7890 lbf; Insert Bearing IB:ZMaRC; Width A:1.6250 in; Dimension B:4.7500 in; Dimension C:4.0000 in; Shaft Diameter D:1 15/16 in; Dimension H:1.5000 in; Pin Dia A1:0.6875 in; Basic Static Radial Load Rating Co:5220 lbf; |
RE16025 Cross Roller Bearing 160x220x25mm | Mass plain bearing:0.93 kg; d:50.8 mm; Basic static load rating C0:670 kN; B:44.45 mm; rb max.:1 mm; Material constant KM:330; b:4.8 mm; D:80.963 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; b1:5 mm; |
RE 2508 Crossed Roller Bearing 25x41x8mm | Basic Static Radial Load Rating Co:20000 N; Accessories:One Shield; d:20.000 mm; B:22.20 mm; Basic Dynamic Radial Load Rating C:23800 N; D:52.0000 mm; Oil Speed Rating n2:12000 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:8500 rpm; Sealed Speed Rating n3:8500 rpm; |
CRBA30025 Cross-Roller Ring (300x360x25mm) Rotary Units Of Manipulators Use | Fillet Radius rb:0.60 mm; B:32.00 mm; D:62.0000 mm; d:30.000 mm; Grease Speed Rating n1:8000 rpm; Basic Dynamic Radial Load Rating C:27600 N; Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:23600 N; |
120.40.2800 Slewing Bearing | J min.:571.5 mm; Max. speed for Taconite seal:340 r/min; Cap bolt, SAE grade:8; Ca:107.798 mm; P60°:557 kN; Eye bolt:2 x 1/2-13 UNC; Da:359.999 mm; J max.:635 mm; PG:1/4 NPT; H:419.1 mm; |
EX200-2 Slewing Bearing | PosiTrac Plus contact element:2 x B10724-109; Bearing:1322 KM; L:466.725 mm; J1:82.55 mm; Housing:SAF 622; da:98.425 mm; Appropriate attachment bolt size G:0.875 in; Pa:16.7 kN; End plug (suffix Y):EPR 13; Mass pillow block:62.8 kg; |
PC300-3 Slewing Bearing | D:115.0000 mm; B:14.00 mm; Basic Dynamic Radial Load Rating C:31900 N; Basic Static Radial Load Rating Co:36500 N; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:5400 rpm; Grease Speed Rating Open/Shielded n1:4400 rpm; d:65.000 mm; Accessories:Without Accessories; |
RB9016 Crossed Roller Bearings 90*130*16mm | Basic Dynamic Radial Load Rating C:10600 N; Grease Speed Rating n1:15000 rpm; Fillet Radius ra:0.64 mm; B:19.1 mm; Accessories:One Seal; D:35.0000 mm; d:10.000 mm; Oil Speed Rating n2:20000 rpm; Sealed Speed Rating n3:15000 rpm; Basic Static Radial Load Rating Co:6100 N; |
111.50.4500 Slewing Bearing Video