| No. | Brand | C | K | A | T | a | G | h | b |
| 2 | - | - | - | - | - | - | M 25x1.5 | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 99.5%, | - | - | - | - | - | - | - | - | - |
| 1-Mcp | - | - | - | - | 53.975 mm | - | - | - | - |
| A10VSO45 | Rexroth | - | - | - | - | - | - | - | - |
| WA16 | - | - | - | - | - | - | - | - | - |
| 2289 | - | - | - | - | 46.4 mm | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| PC130-8M0 | - | - | 5 mm | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| A4812ss | Thomson | - | - | - | - | - | - | - | - |
| 80*96*90 | - | - | - | - | - | - | - | - | - |
| K3v112DT | - | - | - | - | - | - | - | - | - |
| R2 | - | - | - | - | - | - | - | - | - |
| LC350HD | - | - | - | - | - | - | - | - | - |
| 1000 | fag | - | - | - | - | - | - | - | - |
| NV45/50/60/64/70/80/84/90/111/120/137/150/172/210/237/270 | - | - | - | - | - | - | - | - | - |
| 23128C | - | 285.75 mm | - | - | - | 841 mm | - | - | - |
| 2.5mm-30mm | - | - | - | - | 260.35 mm | - | - | - | - |
| EX200-2 | INA | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 100L-5HP-PV2R1 | - | - | - | - | - | - | - | - | - |
| E.1050.20.00.C Four Contact Ball Slewing Ring 834x1046x56mm | Mass shaft washer:1.59 kg; B:11 mm; d1:267 mm; d:220 mm; r1,2 min.:1.1 mm; |
| VSU250755 Slewing Bearings (655x855x63mm) Turntable Bearing | Basic Dynamic Radial Load Rating C:151000 N; B:52.40 mm; Oil Speed Rating n2:3400 rpm; Grease Speed Rating n1:2400 rpm; Basic Static Radial Load Rating Co:193000 N; D:160.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2400 rpm; Accessories:Shield & Seal & Snap; d:90.000 mm; |
| 010.30.560.04 Slewing Bearing | D:170.0000 mm; Sealed Speed Rating n3:2200 rpm; Basic Dynamic Radial Load Rating C:159000 N; Grease Speed Rating n1:2200 rpm; Basic Static Radial Load Rating Co:146000 N; Accessories:Two Shields; d:95.000 mm; B:55.60 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3200 rpm; |
| 124.32.1400 Slewing Bearing | Calculation factor Y0:2; D:635 mm; B:496.888 mm; D1 ≈:605 mm; Basic static load rating C0:22000 kN; Fatigue load limit Pu:1600 kN; Calculation factor e:0.33; r1,2 min.:6.4 mm; Calculation factor Y2:3; T:446.088 mm; |
| VSI 200944-N Four Point Contact Slewing Ring | P150°:30.7 kN; RG:3/8 NPT; Cap bolt, SAE grade:8; A2:160.338 mm; h:42.862 mm; J1:53.975 mm; J min.:269.875 mm; L:361.95 mm; H1:107.95 mm; H:209.55 mm; |
| RE 17020 Crossed Roller Bearing 170x220x20mm | Basic dynamic load rating C:806 kN; Calculation factor Y0:0.33; a:437 mm; D:1500 mm; r3,4 min.:3 mm; D1 ≈:1412 mm; Calculation factor kr:0.078; Calculation factor X:0.39; Calculation factor Y2:0.76; d1 ≈:1341 mm; |
| XD.10.0902P5 Cross Tapered Roller Bearing 901.7x1117.6x82.555mm | Basic Radial Load Rating-Static SCO:5130 N; Inside Diameter D:36.5125 mm; Variant:SZZX Two Seals; Basic Radial Load Rating-Dynamic DC:8180 N; Speed Rating-Single and Double Sealed Grease SDG:5000 rpm; Fillet Radius ra:1.00 mm; B:19.00 mm; Adapter Sleeve AS:SNW9; D:85.0000 mm; |
| 231.21.0775.013 Four Contact Ball Slewing Ring 635x838.8x56mm | Mass needle roller and cage assembly:0.018 kg; Limiting speed:14000 r/min; Ew:37 mm; U:13 mm; Basic static load rating C0:25.5 kN; Fatigue load limit Pu:3 kN; Basic dynamic load rating C:14.7 kN; Reference speed:13000 r/min; Fw:32 mm; |
| 123.40.2500 Slewing Bearing | d:55.000 mm; D:100.0000 mm; Basic Dynamic Radial Load Rating C:54000 N; Oil Speed Rating n2:7500 rpm; B:21.00 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:41500 N; Grease Speed Rating n1:6300 rpm; Fillet Radius rb:1.00 mm; |
| 1797/3230G Slewing Beairng | Bearing limiting speed:4000 r/min; Initial grease fill:181.44 g; L:387.35 mm; Da:180 mm; Mass pillow block:28.6 kg; Labyrinth ring:2 x LOR 114; H2:44.45 mm; P120°:50.7 kN; h:39.688 mm; Adapter sleeve assembly:SNW 3024x4.1/4; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
111.28.1000 Slewing Bearing Video