| No. | Brand | C | K | A | T | a | G | h | b |
| 6000-DDUCM | NSK | - | - | - | - | - | 219.151 mm | - | - |
| FM6FD-20FA | Parker | - | - | - | - | - | - | - | - |
| 2x | - | - | - | 8 mm | - | - | Tr 600x6 | - | - |
| KLT160 | - | - | - | - | - | - | - | - | - |
| RS90-100-SH | Parker | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| pc200 | INA | - | - | - | - | - | - | - | - |
| 2213K | - | - | - | - | - | - | - | - | - |
| 501 | - | - | - | - | - | - | - | - | mm |
| Nk2416 | - | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| ZX210 | - | - | - | - | - | - | - | - | - |
| 30277 | - | - | - | - | - | - | - | - | - |
| NJ210E.TVP2.C3 | fag | 54 mm | 4.5 mm | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | mm |
| 1992-1994 | Timken | - | - | - | - | - | - | - | - |
| NU309 | Nachi | - | - | - | - | - | - | - | - |
| ME202620 | INA | - | - | - | - | - | - | - | - |
| 1220X2440X12/15/17/18mm | - | - | - | - | - | - | - | - | - |
| 107.289850 | - | - | - | - | - | - | - | - | - |
| EC210 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | 38.1 mm | - |
| 18mm | - | - | - | - | - | - | 89.586 mm | - | - |
| 241/710 | - | 57.15 mm | - | - | - | - | - | - | - |
| RKS.060.30.1904 Slewing Bearing Without Gear 1796x2012x68mm | P150°:118 kN; S:4.763 mm; A1:130.175 mm; RG:1/2 NPT; P60°:308 kN; h:60.325 mm; Da:230 mm; Ca:73.812 mm; Mass pillow block:85.7 kg; Pa:24.9 kN; |
| RU 124G Crossed Roller Bearing 80x165x22mm | db min.:136.5 mm; a:47.2 mm; Ca min.:8 mm; Db min.:237 mm; Cb min.:13.5 mm; ra max.:4 mm; Calculation factor Y0:0.9; B:55 mm; rb max.:3 mm; r1,2 min.:4 mm; |
| 9O-1B25-0378-0401 Four Point Contact Ball Slewing Ring | P150°:185 kN; R1:122.237 mm; Housing:SAFS 048 KA; Ca:107.798 mm; Adapter sleeve assembly:SNP 3048x8.1/2; Bearing:23048 CCK/W33; ba:89.694 mm; h:56.356 mm; J max.:635 mm; Max. speed for PosiTrac Plus seal:640 r/min; |
| 013.30.900.03K/P5 Bearing 778x1022x100mm | F:40 mm; B:20.5 mm; d:35 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.046 kg; |
| VRT 3055A Cross Roller Table 40x55x16mm | Mass locking plate:0.18 kg; L:147.625 mm; A1:39.675 mm; Hexagonal head bolts:2 x 1/2-13x7/8; A3:38.1 mm; A2:27.102 mm; B:3.175 mm; |
| XD.10.0686P5 Cross Tapered Roller Bearing 685.8x914.4x79.375mm | D:90.0000 mm; B:36.51 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; Basic Static Radial Load Rating Co:26000 N; Accessories:Synthetic Rubber Sea; Basic Dynamic Radial Load Rating C:44200 N; d:40.000 mm; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; Fillet Radius ra:1.50 mm; |
| RB13015UUCC0 High Precision Cross Roller Ring Bearing | Initial grease fill:39.69 g; P60°:35.1 kN; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:2 x 1/2-13 UNC; Housing:SAF 609; Mass pillow block:9.13 kg; P150°:12 kN; Adapter sleeve assembly:SNW 109x1.3/8; A1:69.85 mm; |
| 011.20.200 Slewing Bearing | B:400.05 mm; Basic dynamic load rating C:6440 kN; Comparative axial load rating CFa:278 kN; Fatigue load limit Pu:1290 kN; Design variant/feature:TQO/GWI; d:384.175 mm; D:546.1 mm; Calculation factor Y2:3; Basic static load rating C0:16600 kN; r1,2 min.:3.3 mm; |
| L9-42N9Z Four-point Contact Ball Slewing Rings With Internal Gear | B1:96 mm; B2:102 mm; G:M 200x3; Nut for removal:KM 40; G1:18 mm; d:190 mm; Mass withdrawal sleeve:3.28 kg; Hydraulic nut:HMV 40 E; d1:180 mm; |
| China Wind Power Slewing Bearing 013.35.2000.03 Wind Turbine Slewing Bearing | ba:25.4 mm; Bearing:1309 EKTN9; Contact seal:2 x B9784-12; P150°:12 kN; P180°:14.7 kN; N1:19.05 mm; Cap bolt recommended tightening torque:149.1 N·m; Ventilation fitting:38174-12; Ca:45.796 mm; RG:1/8 NPT; |
110.25.710 Slewing Bearing Video