No. | Brand | C | K | A | T | a | G | h | b |
3x | - | - | - | - | - | - | - | - | - |
Factory-18mm | - | - | - | - | - | - | - | - | 5.2 mm |
PC130-5 | - | - | - | - | - | - | - | - | mm |
16030m | - | - | - | - | - | - | - | - | - |
CB550K3/F1/2 | NTN | - | - | - | - | - | - | - | - |
1200X1000 | - | - | - | - | - | - | - | - | - |
Kb2000 | INA | - | - | - | - | - | - | - | - |
6018-2NSL | Nachi | - | 4.5 mm | - | - | - | - | - | - |
6306C3 | NSK | - | - | - | - | - | - | - | - |
3 | - | - | - | - | - | - | - | - | - |
#2688 | - | - | - | - | - | - | - | - | 13 mm |
10mm | - | - | 12 mm | - | - | - | - | - | - |
99% | - | - | - | - | - | - | - | - | - |
12125-02-9 | - | - | - | - | - | - | - | - | - |
N207 | Nachi | - | - | - | - | - | - | - | - |
DT125 | - | - | - | - | - | - | - | - | - |
DGMDC5YBK30J | TOKIMEC | - | - | - | - | - | - | - | - |
26mm | INA | - | - | - | 276.225 mm | - | - | - | - |
22214SC3 | fag | - | - | - | - | - | - | 61.913 mm | - |
NU414W | NSK | - | - | - | - | - | M 17x1 | 2 mm | 4 mm |
RE15030 Cross Roller Bearings,RE15030 Bearings150x230x30mm | B:25.40 mm; Basic Static Radial Load Rating Co:20000 N; d:20.000 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:8500 rpm; Sealed Speed Rating n3:8500 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:12000 rpm; D:52.0000 mm; Basic Dynamic Radial Load Rating C:23800 N; |
VLU201094 Four Point Contact Slewing Ring | H1:53.975 mm; H2:33.337 mm; H:109.537 mm; J min.:131.762 mm; Basic dynamic load rating C:102 kN; J max.:152.4 mm; A:58.737 mm; B:59.531 mm; Mass bearing unit:3.65 kg; s:29.766 mm; |
CRB30040UUT1 High Precision Cross Roller Ring Bearing | ra max.:1 mm; B:100 mm; Basic static load rating C0:4500 kN; α:12 °; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:120 mm; Specific dynamic load factor K:300 N/mm²; Specific static load factor K0:500 N/mm²; da max.:124.5 mm; r2 min.:1 mm; |
EXCAVATOR SLEWING RING, SWING BEARING, SWING CIRCLE FOR KOBELCO SK120-5 | J7:15.5 mm; H2:19 mm; A1:27 mm; A:45 mm; H1:47.6 mm; H:93 mm; Limiting speed:1100 r/min; N4:4 mm; Housing material:Cast iron; s1:25.4 mm; |
1798/1100G2 Slewing Beairng | da min.:66 mm; Basic static load rating C0:12.2 kN; r1,2 min.:1.1 mm; Calculation factor f2C:1.06; r3,4 min.:0.6 mm; Calculation factor f1:0.99; D1:82.22 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; d1:72.74 mm; B:18 mm; |
VLI200414-N Slewing Bearing S-upplier Made In China 325x518x56mm | b:8 mm; B:28 mm; Recommended tightening torque:8.4 N·m; h:3.5 mm; Mass:0.72 kg; d1:95 mm; Grub (set) / Locking screw size:M 5; G:M 75x2; Associated spanner (Hook spanner in accordance with DIN 1810):HN 15; d3:100 mm; |
JXR652050 Cross Roller Bearing 310x425x45mm | Basic static load rating C0:0.245 kN; D2 ≈:8.8 mm; Calculation factor kr:0.02; Basic dynamic load rating C:0.553 kN; Reference speed:130000 r/min; Da max.:8.9 mm; r1,2 min.:0.2 mm; Fatigue load limit Pu:0.011 kN; Calculation factor f0:12.3; Limiting speed:63000 r/min; |
JXR637050 Cross Tapered Roller Bearing 300x400x36.492mm | d:1000 mm; G1:70 mm; G:Tr 1060x8; B1:630 mm; G2:G 1/4; Mass withdrawal sleeve:608 kg; Hydraulic nut:HMV 212 E; B2:652 mm; d1:950 mm; A:15 mm; |
NRXT12020E Crossed Roller Bearing 120x170x20mm | RG:3/4 NPT; Mass pillow block:117 kg; Cap bolt, SAE grade:8; H:317.5 mm; R1:95.25 mm; P120°:149 kN; P60°:394 kN; A1:158.75 mm; P150°:136 kN; Adapter sleeve assembly:SNW 30x5.3/16; |
Komatsu PC300LC-6LC Excavator Part Number 207-25-61100 Swing Bearing | d:40 mm; Limiting speed:4000 r/min; Eb:77 mm; Basic static load rating C0:365 kN; Mass roller and cage thrust assembly:0.098 kg; Basic dynamic load rating C:95 kN; Roller and cage thrust assembly:K 89308 TN; Fatigue load limit Pu:36.5 kN; Housing washer:GS 89308; Ea:44 mm; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
114.50.4500 Slewing Bearing Video