No. | Brand | C | K | A | T | a | G | h | b |
8X4 | - | - | - | - | - | - | - | - | - |
BRS-11 | - | - | - | - | - | - | - | - | - |
Nk2416 | - | - | - | - | - | - | - | - | - |
12mm | - | - | - | - | - | - | - | 15 mm | - |
KLT160 | - | - | - | - | - | - | - | - | - |
7036ACD/P4ADBBVQ196 | INA | - | - | - | - | - | - | - | - |
GNX250 | - | - | - | - | - | - | - | - | - |
TM2419+ | - | - | - | - | - | - | - | - | - |
3X7 | - | - | 3 mm | - | - | - | M 155x3 | - | - |
1992-1994 | Timken | - | - | - | - | - | - | - | - |
311B | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | 89.586 mm | - | - |
607Z | - | - | - | - | - | - | - | - | - |
6008-2RS1/C3GJN | - | - | - | - | - | 3 mm | - | - | - |
12-15 | - | - | - | - | 342.9 mm | - | - | - | - |
220g | INA | - | - | - | - | - | - | - | - |
6072 | - | - | 4.5 mm | - | - | - | - | - | - |
8 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
(DC-160) | - | - | - | - | - | - | - | - | - |
KMX32 | INA | - | - | - | - | - | - | - | - |
23080CCK/W33 | - | - | - | - | - | - | - | - | - |
M2X120B-CHB-10A-61-250 | - | - | - | - | - | - | - | - | - |
514 | - | - | - | - | - | - | - | - | - |
1986-1987 | - | - | - | - | - | - | - | - | - |
3.8 | - | - | - | - | - | - | - | - | - |
5203-A | Nachi | - | - | - | 44.5 mm | - | - | - | - |
RE 15013 Crossed Roller Bearing 150x180x13mm | Specific static load factor K0:250 N/mm²; Specific dynamic load factor K:80 N/mm²; Coefficient of friction µ min.:0.03; L:500 mm; Mass strip:0.41 kg; B:100 mm; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ max.:0.25; Permissible sliding velocity v min.:0 m/s; H:1 mm; |
XSI140414N Crossed Roller Slewing Ring Slewing Bearing | B:82.00 mm; d:85.000 mm; Oil Speed Rating n2:3600 rpm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:265000 N; Grease Speed Rating n1:2800 rpm; Basic Static Radial Load Rating Co:285000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; |
SX011840 Cross Roller Bearing 200x250x24mm | L:209.55 mm; Adapter sleeve assembly:SNW 10x1.5/8; P60°:28.9 kN; h:28.575 mm; Stabilizing ring:SR-10-8; Bearing:1210 EKTN9; Cap bolt recommended tightening torque:61 N·m; da:41.275 mm; A2:165.1 mm; Mass pillow block:5.9 kg; |
797/962G2 Bearing 962x1200x90mm | Mass adapter sleeve assembly:37.2 kg; B5:66 mm; A:4 mm; Locking device:MS 3080-76; d3:470 mm; B:52 mm; G2:M 6; G:Tr 400x5; Hydraulic nut:HMV 80E; B1:168 mm; |
6787/1600G2 Slewing Bearing | Lock washer:W 32; Mass adapter sleeve assembly:7.05 kg; d3 max.:204.927 mm; G:159.614 mm; B1:116.027 mm; d:160 mm; Lock nut:AN 32; B:26.441 mm; Threads per inch:8; d1:139.7 mm; |
133.40.1800 Slewing Bearing | D:100.0000 mm; Basic Dynamic Radial Load Rating C:55300 N; Sealed Speed Rating n3:4900 rpm; d:35.000 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; Basic Static Radial Load Rating Co:31000 N; Grease Speed Rating Open/Shielded n1:7000 rpm; B:25.00 mm; Accessories:Snap-Ring; Fillet Radius ra:1.50 mm; |
VLI200844N Slewing Bearings (736x948x56mm) Turntable Bearing | Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:43000 N; d:30.000 mm; Basic Dynamic Radial Load Rating C:46800 N; B:33.30 mm; D:72.0000 mm; Grease Speed Rating n1:6300 rpm; Oil Speed Rating n2:8500 rpm; Sealed Speed Rating n3:6300 rpm; Accessories:Shield & Seal & Snap; |
Cross Roller Bearing 615895A Thrust Tapered Roller Bearing 901.7x1117.6x82.555mm | Cap bolt recommended tightening torque:400 N·m; Mass pillow block:63.9 kg; Housing:SAF 034 KA; Adapter sleeve assembly:SNW 3034x6; Bearing limiting speed:2800 r/min; ba:64.294 mm; da:152.4 mm; N1:28.575 mm; h:43.656 mm; Cap bolt, SAE grade:5; |
NRXT7013 High Precision Cross Roller Ring Bearing | d:95.000 mm; Oil Speed Rating n2:4700 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3600 rpm; B:24.00 mm; Basic Static Radial Load Rating Co:71000 N; Basic Dynamic Radial Load Rating C:71500 N; D:145.0000 mm; |
KLK 650L Four Point Contact Ball Slewing Turntable Bearing | B:46.00 mm; Grease Speed Rating n1:1400 rpm; Oil Speed Rating n2:2400 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:242000 N; d:190.000 mm; Basic Static Radial Load Rating Co:315000 N; Fillet Radius ra:2.50 mm; D:300.0000 mm; |
114.25.500 Slewing Bearing Video