| 100 mm x 180 mm x 34 mm RE 22025 Crossed Roller Bearing 220x280x25mm | da:100.013 mm; Limiting speed:2200 r/min; H1:104.775 mm; B:116.681 mm; J min.:254 mm; J max.:311.15 mm; Basic dynamic load rating C:311 kN; A:89.694 mm; Mass bearing unit:19.7 kg; L:361.95 mm; Size (mm):100 mm x 180 mm x 34 mm ; |
| RB2008 Crossed Roller Bearings | s:5 mm; B:65 mm; r1s (min):4 mm; Static (Coa):1020 kN; Dynamic (Ca):681 kN; F:316 mm; d2:280 mm; b1:mm; b:mm; rs (min):4 mm; |
| Komatsu PC200-2 Excavator Slewing Bearing | d1:1000 mm; G3:15 mm; d3:1200 mm; G2:G 1/4; B5:125 mm; Mass adapter sleeve assembly:490 kg; A:12 mm; Locking device:MS 30/1000; B:100 mm; d:1060 mm; |
| XR882054 Crossed Roller Bearing 901.7x1117.6x82.555mm | Width A:1.5000 in; Basic Dynamic Radial Load Rating:4380 lbf; Distance J:3.0000 in; Shaft Diameter D:1 1/4 in; Dimension F:0.6250 in; Insert Bearing IB:ZMaRC; Dimension L:3.8750 in; Thread Diameter G:7/16-14; Dimension H1:1.6875 in; Height H:3.3750 in; |
| NRXT7013DD Crossed Roller Bearing 70x100x13mm | Dimension H2:0.7500 in; Dimension A1:1.2500 in; Width A:1.8750 in; Distance JMIN:4.9375 in; Basic Static Radial Load Rating Co:4270 lbf; Shaft Diameter D:1 1/2 in; Basic Dynamic Radial Load Rating:5550 lbf; Height H:3.9063 in; Distance JMAX:5.7500 in; Dimension L:6.8750 in; |
| 120.50.4000 Slewing Bearing | L:330.2 mm; Ca:57.785 mm; Bearing:1313 EKTN9; A1:88.9 mm; J min.:244.475 mm; J1:53.975 mm; Stabilizing ring:2 x SR-1613; Da:140 mm; Cap bolt, SAE grade:8; Cap bolt:2 x 5/8-11 UNC; |
| 012.60.2240 Slewing Bearing | H:161.925 mm; Da:130 mm; Lock washer:W 12; ba:38.1 mm; S:4.763 mm; Max. speed for Taconite seal:1075 r/min; dc:57.15 mm; P150°:13.8 kN; Cap bolt recommended tightening torque:149.1 N·m; db:73.025 mm; |
| D8788/830 Slewing Bearing | D:120.0000 mm; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:3800 rpm; Grease Speed Rating n1:3800 rpm; d:55.000 mm; Basic Static Radial Load Rating Co:122000 N; Accessories:One Seal; Fillet Radius ra:2.00 mm; B:52.40 mm; Basic Dynamic Radial Load Rating C:119000 N; |
| 91-20 0741/1-07142 Four-point Contact Ball Slewing Bearing With External Gear | s2 max.:5.3 mm; Mass bearing + sleeve:1.95 kg; G:M 80x2; d2 ≈:88.5 mm; Basic static load rating C0:240 kN; Da max.:121 mm; G1:8 mm; r1,2 min.:1.5 mm; da max.:107 mm; ra max.:1.5 mm; |
| 2797/955G2 Bearing 955x1200x90mm | Pu:1579.250 kg; Dynamic (Cr):10149 kN; Weight:1300 ; D:1090 mm; d:750 mm; B1:335 mm; Bearing designation:PLC 512-56 ; Static (Cor):25200 ; B:475 mm; |