No. | Brand | C | K | A | T | a | G | h | b |
AP2D25,Piston | Rexroth | - | - | - | - | - | - | - | - |
K81217-TV | INA | - | - | - | - | - | - | - | - |
7228-BCBM | FAFNIR | - | - | - | - | - | - | 50.8 mm | - |
160 | - | - | - | - | - | - | M 72x4 | 265 mm | - |
1680ml | - | - | - | - | - | - | - | - | - |
ISO4706 | - | - | - | - | - | - | - | - | - |
250PSI | Parker | - | - | - | - | - | - | - | - |
C4122V/C3 | SKF | - | - | - | - | 22.8 mm | - | - | - |
10 | SKF | - | - | - | - | - | - | - | - |
1955-1971 | Timken | - | - | - | - | - | - | - | - |
4JJ1 | - | - | - | - | - | - | - | - | - |
XJ900 | - | - | - | - | - | - | - | - | - |
DBDH10P10-50 | Rexroth | - | - | - | - | - | - | - | - |
67390NTN | NTN | - | - | - | - | - | - | - | - |
S6205-2RS | - | - | - | - | - | - | - | - | - |
NJ321C4 | - | - | - | - | - | - | - | - | - |
K3V112dt | - | - | - | - | - | - | M 120x2 | - | - |
20X32X7 | - | - | - | - | - | - | M 42x3 | 145 mm | - |
90% | - | - | - | - | - | - | - | - | - |
1220X2440X12/15/17/18mm | - | - | - | - | - | - | - | - | - |
IR-485632 | koyo | - | - | - | - | - | - | - | - |
25x42x9 | - | - | - | - | - | - | - | - | - |
T6 | - | - | - | - | - | - | - | - | - |
3mm | - | - | - | - | - | - | - | - | - |
20 | - | - | - | - | - | - | - | - | - |
3-5 | - | - | - | - | - | - | - | - | - |
PC90-2 | - | - | - | - | - | - | - | - | - |
RB12025UUC0 High Precision Cross Roller Ring Bearing | Static (Coa):215 kN; r2s (min):0.6 mm; C:22 mm; D:130 mm; T:29 mm; Pu:25.480 kN; B:29 mm; d2:85 mm; r1s (min):1.5 mm; rs (min):1.5 mm; |
IMO 11-160100/1-08100 Slewing Rings-external Toothed | d:406.4 mm; Calculation factor Y2:2.1; Basic static load rating C0:9500 kN; Comparative axial load rating CFa:238 kN; r1,2 min.:1.5 mm; B:288.925 mm; Design variant/feature:TQOSN/GWISI; d1 ≈:434 mm; Mass bearing:180 kg; Thrust factor K:1.22; |
013.30.560 Slewing Bearing | d:40.000 mm; Oil Speed Rating n2:7500 rpm; D:80.0000 mm; Sealed Speed Rating n3:5600 rpm; B:30.20 mm; Basic Static Radial Load Rating Co:34000 N; Accessories:Shield & Seal; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:44900 N; |
XU080149 Cross Roller Bearing Manufacturer 101.6x196,85x22.22mm | b1:9.4 mm; Fatigue load limit Pu:375 kN; Da max.:425 mm; r1,2 min.:3 mm; Basic dynamic load rating C:1760 kN; B:118 mm; K:5 mm; da min.:336 mm; d:320 mm; s max.:6 mm; |
RE30040 Cross Roller Bearings,RE30040 Bearings SIZE 300x405x40mm | Old MRC Bearing Number:205FS3; Accessories:8000 One Seal; Speed Rating-Single and Double Sealed Grease SDG:8500 rpm; Width - Inner Ring B1:15.20 mm; Basic Interchange NDH:8026; d:26.000 mm; Width - Overall B:15.9 mm; Fillet Radius ra:1.00 mm; Basic Interchange BCA:8026; Basic Radial Load Rating-Static SCO:8000 N; |
112.36.1250.03 Bearing 1085x1475x110mm | D:42.0000 mm; B:12.00 mm; Basic Static Radial Load Rating Co:5000 N; Fillet Radius ra:0.64 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; Basic Dynamic Radial Load Rating C:9360 N; Sealed Speed Rating n3:11000 rpm; Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:17000 rpm; d:20.000 mm; |
YRT460 Rotary Table Bearing 460x600x70mm | d1:50 mm; db min.:61 mm; d2 ≈:70.1 mm; Fatigue load limit Pu:30 kN; Ba min.:6 mm; D:120 mm; da max.:70 mm; Calculation factor Y1:1.9; Calculation factor e:0.35; Da max.:109 mm; |
Crossed Roller Bearings XSA140544-N Standard Series 14, External Gear Teeth, Lip Seals On Both Sides | Mass needle roller and cage assembly:0.002 kg; Fatigue load limit Pu:0.54 kN; Basic dynamic load rating C:4.84 kN; Reference speed:30000 r/min; Basic static load rating C0:4.75 kN; U:10 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 8x12x3; Fw:8 mm; Limiting speed:34000 r/min; Ew:12 mm; |
CAT E307B Slewing Bearing | Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:332000 N; Oil Speed Rating n2:3000 rpm; B:104.00 mm; Basic Static Radial Load Rating Co:375000 N; D:210.0000 mm; d:85.000 mm; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:2300 rpm; |
020.25.500 Slewing Bearing | A1:430 mm; Q150°:3350 kN; Locating ring:2 x FRB 29.5/720; Mass housing:751 kg; Oil level, max.:113 mm; A:455 mm; A2:455 mm; P90°:4800 kN; Oil seal:2 x TSD 30/500 U; Oil level, min.:94 mm; |
021.60.4000 Slewing Bearing Video