No. | Brand | C | K | A | T | a | G | h | b |
62209 | - | - | - | - | - | - | - | - | - |
N43W | - | - | - | - | - | - | - | - | - |
ISO4706 | - | - | - | - | - | - | - | - | - |
2007-2008 | NSK | - | - | - | - | - | - | - | - |
TL194 | - | - | - | - | - | - | - | - | - |
A10V | Rexroth | - | - | - | - | - | - | - | - |
EM1 | - | - | - | - | - | - | - | - | - |
20x27x4mm | - | - | - | - | 32.545 mm | - | - | - | - |
12kw | - | - | - | - | - | - | - | - | - |
2pieces | - | - | - | - | - | - | - | - | - |
1/2/3 | - | - | - | - | - | - | - | 42.069 mm | - |
3-25mm | - | - | - | - | - | - | - | - | - |
YB60000571 | - | - | - | - | - | 81 mm | - | - | - |
(Har-900) | - | - | - | - | - | - | - | - | - |
1220*2440*18mm | - | - | - | - | - | - | - | - | - |
IR-384828 | koyo | - | - | - | - | - | - | - | - |
8x14x4mm | - | - | - | - | - | - | M 56x4 | - | - |
21308KC3 | fag | - | - | - | - | 228 mm | - | - | - |
32907JR-3 | koyo | - | - | - | - | - | - | - | - |
32005/26 | koyo | - | - | - | - | - | - | 17 mm | - |
EC250D | INA | - | - | - | - | - | - | - | - |
3G4768 | - | - | 4.5 mm | - | - | - | - | - | 8.3 mm |
1600 | - | - | - | - | - | - | - | - | - |
CRBA07013 Crossed Roller Ring (70x100x13mm) Precision Robotic Arm Use | Mass adapter sleeve assembly:2.5 kg; Locking device:MBL 24; d1:110 mm; d:120 mm; B4:22 mm; G:M 120x2; Lock nut:KML 24; Hydraulic nut:HMV 24 E; B:20 mm; d3:145 mm; |
HS6-37P1Z Slewing Bearings (32.83x41.25x2.2inch) Without Gear | D:500.0000 mm; Sealed Speed Rating n3:0 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:247000 N; Grease Speed Rating Open/Shielded n1:1000 rpm; Basic Static Radial Load Rating Co:380000 N; Accessories:One Seal; d:400.000 mm; B:46.00 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; |
024.40.1250 Slewing Bearing | RG:1/2 NPT; End plug (suffix Y):EPR 14; PG:1/4 NPT; P180°:81.4 kN; Ca:85.801 mm; Cap bolt, SAE grade:5; R1:77.787 mm; L:419.1 mm; A1:120.65 mm; Pa:27.4 kN; |
VRT 1045A Cross Roller Table 20x45x8mm | d1:360 mm; A:9 mm; G2:G 1/4; B2:294 mm; B1:284 mm; G1:42 mm; Hydraulic nut:HMV 80 E; Nut for removal:HM 3180; G:Tr 400x5; d:380 mm; |
MTE-265 Slewing Bearing | Fillet Radius ra:0.30 mm; Oil Speed Rating n2:31000 rpm; Grease Speed Rating n1:24000 rpm; Fillet Radius rb:0.10 mm; Basic Dynamic Radial Load Rating C:7610 N; d:10.000 mm; B:16.00 mm; D:26.0000 mm; Basic Static Radial Load Rating Co:4150 N; |
CRBB25040 Cross-Roller Bearing (250x355x40mm) Precision Turntable Bearing | Da max.:353 mm; Calculation factor e:0.4; K:6 mm; d2 ≈:248 mm; Basic dynamic load rating C:2197 kN; Calculation factor Y2:2.5; b:11.1 mm; Mass bearing + sleeve:76 kg; ra max.:3 mm; Basic static load rating C0:3350 kN; |
2789/2240G2 Slewing Bearing | Preload class A GA:200 N; Calculation factor e:0.68; Number of balls z:25; D:110 mm; r1,2 min.:1.1 mm; Basic static load rating C0:17.3 kN; d:70 mm; Calculation factor (single, tandem) Y0:0.38; Calculation factor (back-to-back, face-to-face) Y1:0.92; dn:86.5 mm; |
R220-5 Bearings | Grease Speed Rating n1:3200 rpm; Basic Static Radial Load Rating Co:163000 N; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:3200 rpm; B:61.90 mm; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; D:140.0000 mm; |
134.45.2240 Slewing Beairng | Basic dynamic load rating C:6.76 kN; Preload class C GC:160 N; r1,2 min.:0.3 mm; Calculation factor f2C:1.12; rb max.:0.2 mm; d:30 mm; Calculation factor (single, tandem) Y2:0.87; Calculation factor f:1.08; Mass bearing:0.045 kg; Da max.:45 mm; |
11-32 0823/2-02613 Four-point Contact Ball Slewing Bearing With External Gear | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:108000 N; Oil Speed Rating n2:4800 rpm; Basic Dynamic Radial Load Rating C:108000 N; D:120.0000 mm; d:65.000 mm; Fillet Radius rb:1.00 mm; B:46.00 mm; Grease Speed Rating n1:3600 rpm; |
021.40.1800 Slewing Bearing Video