No. | Brand | C | K | A | T | a | G | h | b |
28.6-38kw | - | - | - | - | - | - | - | - | - |
61908-Y | fag | - | - | - | - | - | - | - | - |
3mm | - | - | 7.5 mm | - | - | - | - | - | 13.9 mm |
12mm | - | - | - | - | - | - | - | - | - |
MOT-FC-EV2 | Rexroth | - | 7.5 mm | - | - | - | M 120x2 | - | 13.9 mm |
R200-7 | - | - | - | - | - | - | - | - | - |
FC20 | - | - | - | - | - | - | - | - | - |
80 | - | - | - | - | - | - | - | - | - |
220g | - | - | - | - | - | - | - | - | - |
T2EE100/Q | SKF | - | - | - | - | - | - | - | - |
9150472 | - | - | - | - | - | - | - | - | 10 mm |
2003 | NTN | 80 mm | - | - | - | - | - | - | - |
GSA2080 | - | - | - | - | - | - | - | - | - |
PUMP_PVP48303R6A2M | Parker | - | - | - | - | - | - | - | - |
6010 | Nachi | - | - | - | - | - | - | - | - |
MB5243XP | - | - | - | - | - | - | M 45x1.5 | - | - |
NK16/16 | - | - | - | - | 610 mm | - | - | - | - |
10,000 | - | - | - | - | - | - | - | - | - |
3 | - | - | - | - | - | - | - | 46.038 mm | - |
697ZZ | NTN | - | - | - | - | - | - | - | - |
5ml | - | - | - | - | - | - | - | - | - |
AP2D25LV1RS7 | - | - | - | - | - | - | - | - | - |
GX21510 | John Deere | - | - | - | - | - | - | - | - |
#4607 | - | - | - | - | - | - | - | - | - |
PC90-2 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
5050 | - | - | - | - | - | - | Tr 630x6 | - | - |
VRT 1075A Cross Roller Table 20x75x8mm | Sealed Speed Rating n3:4800 rpm; Accessories:One Seal & Snap-Ring; B:30.20 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:4800 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; d:50.000 mm; Oil Speed Rating n2:6300 rpm; Basic Static Radial Load Rating Co:39000 N; |
RE15025 Cross Roller Bearings,RE15025 Bearings150x210x25mm | d:105.000 mm; Oil Speed Rating n2:3800 rpm; Basic Dynamic Radial Load Rating C:143000 N; B:36.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2800 rpm; D:190.0000 mm; Basic Static Radial Load Rating Co:129000 N; Fillet Radius ra:2.00 mm; |
RK6-43N1Z Heavy Duty Slewing Ring Bearing With Internal Gear | ba:74.612 mm; Eye bolt:2 x 3/8-16 UNC; R1:115.888 mm; Labyrinth ring:2 x LOR 159; RG:3/4 NPT; Initial grease fill:878.85 g; End plug (suffix Y):EPR 21; H:360.363 mm; Cap bolt recommended tightening torque:203.4 N·m; da:182.563 mm; |
RE40035 Cross Roller Bearing 400x480x35mm | H2:41.275 mm; P90°:60.9 kN; R1:60.325 mm; Bearing:22218 E; Cap bolt:2 x 5/8-11 UNC; End plug (suffix Y):EPR 11; Pa:27.1 kN; da:90 mm; Initial grease fill:141.75 g; S:4.763 mm; |
Cross Roller Bearing RA5008CUUCC0 (50x66x8) | Coefficient of friction µ max.:0.15; Mass bushing:0.24 kg; Permissible sliding velocity v max.:1 m/s; D:90 mm; Tolerance shaft:f7 m/s; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:120 N/mm²; Tolerance housing:H7 m/s; d:85 mm; |
EX60-3 Slewing Bearing | Sealed Speed Rating n3:5600 rpm; d:35.000 mm; Basic Static Radial Load Rating Co:34500 N; Oil Speed Rating n2:7500 rpm; B:38.10 mm; D:80.0000 mm; Basic Dynamic Radial Load Rating C:49400 N; Grease Speed Rating n1:5600 rpm; Fillet Radius ra:1.50 mm; Accessories:Two Shields; |
RB15013UUC0 High Precision Cross Roller Ring Bearing | H2:101.6 mm; h:87.313 mm; End plug (suffix Y):EPR 21; P120°:249 kN; Pa:82.7 kN; H:495.3 mm; S:4.763 mm; PG:1/4 NPT; da:182.563 mm; P180°:267 kN; |
A18-46E4D Four Point Contact Ball Slewing Bearing With External Gear | db min.:108 mm; Mass bearing + sleeve:6.3 kg; Limiting speed:4800 r/min; Reference speed:3600 r/min; Ba min.:8 mm; d2 ≈:118 mm; D1 ≈:157 mm; ra max.:2 mm; D:180 mm; r1,2 min.:2.1 mm; |
7397/2700G2K3 Slewing Bearing | D:85.0000 mm; B:30.20 mm; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating n2:6700 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:5000 rpm; Basic Static Radial Load Rating Co:54000 N; Accessories:Two Shields; d:45.000 mm; Basic Dynamic Radial Load Rating C:51200 N; |
111.40.2500 Slewing Bearing | Sealed Speed Rating n3:3800 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:5000 rpm; B:38.10 mm; D:110.0000 mm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:70200 N; d:60.000 mm; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:58500 N; |
020.60.4000 Slewing Bearing Video