No. | Brand | C | K | A | T | a | G | h | b |
2-11/16" | FAFNIR | - | - | - | - | - | - | - | - |
1070T | Rexnord | - | - | - | - | - | - | - | - |
10mm | - | - | 12 mm | - | - | - | - | - | - |
25X52X15 | - | - | - | - | - | - | - | - | - |
Z2S10 | Rexroth | - | - | - | - | - | - | - | - |
35x80x21 | - | - | - | - | - | 4 mm | - | - | - |
12mm | - | - | - | 63.5 mm | - | - | - | - | - |
3585 | Timken | - | - | - | - | - | - | - | - |
2019 | INA | - | - | - | - | - | - | - | - |
16F24C6164A3FEV80 | Parker | - | - | - | - | - | - | - | - |
15-18% | - | - | - | - | - | - | - | - | - |
3/4/6/9/12/15/18/25mm | - | - | - | - | - | - | - | - | - |
320x440x90 | - | - | - | - | - | - | - | - | - |
6303ZJ | SKF | - | - | - | - | - | - | - | - |
41.62044 | Nachi | - | - | - | - | - | - | - | - |
8x12x3.5 | - | - | - | - | - | - | - | - | - |
Mag18vp-250 | INA | - | - | - | - | - | - | - | - |
6006 | - | - | - | - | - | - | - | - | - |
ec290 | - | - | - | - | - | - | - | - | - |
99% | - | - | - | - | - | - | - | - | mm |
SK03 Slewing Bearing | Accessories:Two Seals; Basic Dynamic Radial Load Rating C:24200 N; Basic Static Radial Load Rating Co:22400 N; Oil Speed Rating Open/Shielded n2:7000 rpm; D:105.0000 mm; d:75.000 mm; Fillet Radius ra:1.00 mm; B:16.00 mm; Sealed Speed Rating n3:3600 rpm; Grease Speed Rating Open/Shielded n1:6000 rpm; |
VSU200744 Slewing Bearings (672x816x56mm) Turntable Ring | ba:27.781 mm; P90°:23.6 kN; A1:69.85 mm; Pa:4.07 kN; Appropriate attachment bolt size G:0.625 in; Cap bolt, SAE grade:8; N1:19.05 mm; Cap bolt:2 x 1/2-13 UNC; Ventilation fitting:38174-12; Initial grease fill:107.73 g; |
XR820061 Crossed Roller Bearing 580x760x80mm | A2:206.375 mm; N1:23.813 mm; Housing:SAFS 518; RG:3/8 NPT; PG:1/8 NPT; Max. speed for Taconite seal:950 r/min; H1:101.6 mm; P60°:141 kN; P120°:53.4 kN; H2:41.275 mm; |
SX011840 Cross Roller Bearing 200x250x24mm | L:209.55 mm; Adapter sleeve assembly:SNW 10x1.5/8; P60°:28.9 kN; h:28.575 mm; Stabilizing ring:SR-10-8; Bearing:1210 EKTN9; Cap bolt recommended tightening torque:61 N·m; da:41.275 mm; A2:165.1 mm; Mass pillow block:5.9 kg; |
R200 Bearings | Cap bolt recommended tightening torque:81.3 N·m; J min.:187.325 mm; N1:19.05 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 5; P180°:19.1 kN; L:244.475 mm; Housing:SAF 511; P120°:17.3 kN; H:133.35 mm; |
CRB800100UUT1 High Precision Cross Roller Ring Bearing | D:210.0000 mm; d:85.000 mm; Grease Speed Rating n1:2600 rpm; Basic Dynamic Radial Load Rating C:307000 N; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:400000 N; Oil Speed Rating n2:3000 rpm; Fillet Radius ra:3.00 mm; B:104.00 mm; |
91-32 1255/1-06145 Four-point Contact Ball Slewing Bearing With External Gear | C:36 mm; r2 min.:1 mm; Basic dynamic load rating C:245 kN; Lubricant:Regular relubricatio; r1 min.:1 mm; rb max.:1 mm; Specific static load factor K0:500 N/mm²; Mass plain bearing:1.1 kg; α:6 °; b:6.2 mm; |
VRT 2080A Cross Roller Table 30x80x12mm | Initial grease fill:141.75 g; P60°:157 kN; Pa:10.9 kN; L:349.25 mm; Housing:FSAFS 518; Da:160 mm; End plug (suffix Y):EPR 11; H1:101.6 mm; h:38.1 mm; Cap bolt recommended tightening torque:149.1 N·m; |
Slewing Bearing For Komatsu PC200 Excavator | Reference speed:2200 r/min; Operating clearance factor k2:0.117; B:67 mm; Limiting speed:2800 r/min; da max.:210 mm; D1 ≈:236 mm; Da min.:226 mm; s1 max.:19 mm; Mass bearing:12.4 kg; d:170 mm; |
RB5013UUCC0 High Precision Cross Roller Ring Bearing | Lw:23.8 mm; r2 max.:1 mm; r1,2 min.:0.3 mm; Dw:4 mm; Mass needle roller:2.35 g; r1 max.:0.8 mm; |
014.75.3150 Slewing Bearing Video