| No. | Brand | C | K | A | T | a | G | h | b |
| (1220X2440mm) | - | - | - | - | - | - | - | - | - |
| 15120/15245 | NSK | - | - | - | - | - | - | - | - |
| PC90-2 | - | - | - | - | - | - | - | - | - |
| 1pc | - | - | - | 9 mm | - | - | Tr 630x6 | - | - |
| 50% | - | - | - | 35 mm | - | - | - | - | - |
| LPVD64 | - | - | - | - | - | - | - | 42.862 mm | - |
| 500044010 | - | 26 mm | - | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| 7784-26-1 | - | - | - | - | - | - | - | - | - |
| 70mm | - | - | - | - | - | - | - | - | - |
| 6011 | fag | - | - | - | - | - | Tr 500x5 | - | - |
| FYRP2 | SKF | - | - | - | - | - | - | - | - |
| T6 | - | - | - | - | - | - | - | - | - |
| (1220*2440) | - | - | - | - | - | - | - | - | - |
| 250 | - | - | - | 4.2 mm | - | - | - | - | - |
| 1700 | - | - | - | - | - | - | - | - | - |
| 7008ACD/PA9ADBB | - | - | - | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| CAS7783-20-2 | INA | - | - | - | - | - | - | - | - |
| 6226-C3-J20-AA | fag | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 7650 | - | - | - | - | - | - | - | - | - |
| 1980-1983 | Timken | - | - | - | - | - | - | - | 22.3 mm |
| 5mm/0.5mm | - | - | - | - | - | - | - | - | - |
| 16030m | - | - | - | - | - | - | - | - | - |
| HPR105D-02 | - | - | - | - | - | - | - | - | - |
| 4600 | - | - | - | - | - | - | - | - | - |
| 232 | - | - | - | - | - | - | - | - | - |
| RU297GUUCC0P5 High Precision Crossed Roller Bearing | Axial load factor Y:0.6; Fatigue load limit Pu:8.15 kN; Limiting value e:0.2; D:85 mm; C:19 mm; Basic dynamic load rating C:69.5 kN; D1 ≈:72.4 mm; Da max.:77.6 mm; Mass bearing:0.33 kg; Fw:54.5 mm; |
| KOBELCO SK09 EXCAVATOR SLEWING RING, SWING BEARING, SWING CIRCLE | D:90.0000 mm; Oil Speed Rating n2:7200 rpm; Basic Static Radial Load Rating Co:67000 N; d:40.000 mm; Grease Speed Rating n1:6000 rpm; Fillet Radius rb:1.00 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:79300 N; B:46.00 mm; |
| PC60-6(76T) Slewing Bearing | d:160 mm; Mass adapter sleeve assembly:8.15 kg; Sleeve:S 132x5.1/2; Lock washer:W 32; G:159.614 mm; B1:150.114 mm; d3 max.:204.927 mm; Hydraulic nut:HMVC 32E; d1:139.7 mm; B:26.441 mm; |
| Cross Roller Bearing XD.10.1549P5 Thrust Tapered Roller Bearing 1549.4x1828.8x101.6mm | Mass pillow block:132 kg; da:174.625 mm; Taconite seal:TER 154; P120°:133 kN; H1:169.875 mm; Eye bolt:2 x 3/8-16 UNC; P90°:207 kN; Bearing:23038 CCK/W33; Max. speed for Taconite seal:440 r/min; RG:3/4 NPT; |
| W17-108P1 Four-point Contact Ball Slewing Rings | Fillet Radius ra:0.30 mm; D:24.0000 mm; Basic Interchange NDH:WC87008; Old MRC Bearing Number:38FSF2; Basic Radial Load Rating-Dynamic DC:3320 N; Basic Interchange BCA:-; Width - Outer Ring B0:10.3 mm; Basic Radial Load Rating-Static SCO:1430 N; d:8.000 mm; Width - Overall B:10.3 mm; |
| 2797/1010G2 Bearing 1010x1200x90mm | d:130 mm; Threads per inch:12; Hydraulic nut:HMVC 26E; G:129.692 mm; d3 max.:155.702 mm; Lock nut:N 026; B1:81.966 mm; Mass adapter sleeve assembly:3.4 kg; d1:112.713 mm; B:22.479 mm; |
| CRBA03010 Crossed Roller Ring (30x55x10mm) Precision Robotic Arm Use | Comparative radial load rating CF:1080 kN; Fatigue load limit Pu:880 kN; d1 ≈:392 mm; D:488.95 mm; Comparative axial load rating CFa:179 kN; r1,2 min.:1.5 mm; Calculation factor Y1:2; Basic dynamic load rating C:4130 kN; Mass bearing:195 kg; d:355.6 mm; |
| 232.20.0500.013 Typ 21/650.2 Slewing Bearing Inner Gear Teeth | Oil:12 500 min-1; rs (min):1.1 mm; Pu:0.662 kN; D:62 mm; Dynamic (Cr):26.842 kN; Static (Cor):14.570 kN; a:27 mm; B:17 mm; Grease:10 000 min-1; r1s (min):0.6 mm; |
| RB30040 Precision Cross Roller Bearing | Basic Static Radial Load Rating Co:78000 N; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:2900 rpm; D:160.0000 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; d:65.000 mm; B:37.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; Basic Dynamic Radial Load Rating C:119000 N; |
| RE 2008 UU Crossed Roller Bearing 20x36x8mm | A1:15 mm; Basic dynamic load rating C:35.1 kN; Recommended diameter for attachment bolts, inch G:0.625 in; N4:2 mm; B:51.6 mm; s1:32.6 mm; Recommended diameter for attachment bolts, mm G:16 mm; DN:6.5 mm; L:116 mm; B4:9 mm; |
011.75.4000 Slewing Bearing Video
6320M.C3.J20AA FAG • ABF Store
6320M.C3.J20AA FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
6320 M C3 - FAG Deep Groove - Quality Bearings Online
This 6320 M C3 FAG bearing is a Open Type Deep Groove Radial Ball Bearing with a Machined Brass cage, this bearing also has a larger than standard radial
FAG 6320-M-C3 DEEP GROOVE BALL BEARING: Amazon
Part Number, 6320MC3. UPC, 751570017591. Brand Name, FAG. EAN, 0751570017591. Item Weight, 19.05. Number of Items, 1. UNSPSC Code, 31171500
FAG (Schaeffler) - 6320.M.C3 - Motion Industries
Buy FAG (Schaeffler) Radial & Deep Groove Ball Bearings 6320.M.C3 direct from Motion Industries. Your proven service leader with reliable delivery since
6320 -M-C3 FAG • SP
Buy 6320 -M-C3 manufactured by FAG. Inner Diameter: 100, Outer Diameter: 215, Width: 47, Weight: 8400. a.k.a. 6320 M/C3 (SKF),6320M1/C3
FAG 6320M-C3 Radial Bearing, Single Row, ABEC 1
FAG 6320M-C3 Radial Bearing, Single Row, ABEC 1 Precision, Open, Brass Cage, C3 Clearance, Metric, 100mm ID, 215mm OD, 47mm Width, 30500lbf Static
6320M.C3 FAG • ABF Store
6320M.C3 FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8