| R8-42N3 Crossed Roller Slewing Rings With Internal Gear | B:72.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1400 rpm; D:360.0000 mm; d:170.000 mm; Basic Static Radial Load Rating Co:490000 N; Oil Speed Rating n2:1900 rpm; Basic Dynamic Radial Load Rating C:377000 N; Fillet Radius ra:3.00 mm; |
| 122.28.900 Slewing Bearing | Basic Dynamic Radial Load Rating C:255000 N; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:260000 N; d:80.000 mm; Fillet Radius ra:2.00 mm; B:78.00 mm; Grease Speed Rating n1:7000 rpm; D:170.0000 mm; Oil Speed Rating n2:10000 rpm; |
| MTO-050T Slewing Bearings(50x110x20mm) (1.968x4.331x0.787inch) Without Gear | Basic static load rating C0:85000 kN; D1 ≈:1053.6 mm; Design variant/feature:BC4.10/W33WI; K:12 mm; C:740 mm; r1,2 min.:4 mm; Basic dynamic load rating C:25500 kN; F:885 mm; d:759 mm; Calculation factor kr:640; |
| RB6013 Cross Roller Bearing 60x90x13mm | Bearing:23024 CCK/W33; ba:46.831 mm; Initial grease fill:181.44 g; Appropriate attachment bolt size G:0.875 in; Mass pillow block:28.6 kg; N1:25.4 mm; P150°:46.3 kN; Cap bolt:2 x 3/4-10 UNC; A1:111.125 mm; Cap bolt recommended tightening torque:203.4 N·m; |
| NRXT12025DD Crossed Roller Bearing 120x180x25mm | B:9 mm; d:130 mm; D:170 mm; r1 min.:1 mm; Mass universal washer:0.66 kg; |
| RE50025 Cross Roller Bearings,RE50025 Bearings SIZE 500x550x25mm | Mass needle roller and cage assembly:0.12 kg; Basic static load rating C0:127 kN; U:21 mm; Limiting speed:4800 r/min; Fatigue load limit Pu:15.3 kN; Basic dynamic load rating C:45.7 kN; Fw:100 mm; Reference speed:4000 r/min; Ew:107 mm; |
| 797/1200 Slewing Bearing | Grease Speed Rating Open/Shielded n1:3800 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; Accessories:Shield & Seal; Basic Dynamic Radial Load Rating C:124000 N; d:80.000 mm; Basic Static Radial Load Rating Co:86500 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4500 rpm; Sealed Speed Rating n3:2600 rpm; D:170.0000 mm; |
| 9I-1Z20-0742-1335 Crossed Roller Slewing Ring | d2:105 mm; D:160 mm; a:31 mm; r2s (min):0.6 mm; T:43 mm; r1s (min):2 mm; rs (min):2.5 mm; Pu:49.600 kN; C:34 mm; B:43 mm; |
| RKS.22 0641 Light Series Four-point Contact Ball Slewing Bearing With Internal Gear | Mass bearing unit:9.53 kg; J min.:198.438 mm; S:0.794 mm; Limiting speed:2800 r/min; J max.:223.838 mm; B:92.075 mm; A1:95.25 mm; H1:82.55 mm; s:31.75 mm; L:265.113 mm; |
| RB3010 Cross Roller Bearing 30x55x10mm | d:710 mm; Da max.:1110 mm; r1,2 min.:9.5 mm; Fatigue load limit Pu:1530 kN; D:1150 mm; Misalignment factor k1:0; D1 ≈:1013 mm; Basic static load rating C0:25500 kN; Mass bearing:1429 kg; Ca min.:11.1 mm; |