No. | Brand | C | K | A | T | a | G | h | b |
5mm | - | - | - | - | - | - | - | - | - |
E27 | - | - | - | - | - | - | - | - | - |
2 | - | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
10x | - | - | - | - | - | - | - | - | - |
16010 | fag | - | - | - | - | - | - | - | - |
NV270 | - | - | - | - | - | - | - | - | - |
1712022030 | - | - | - | - | - | - | - | - | - |
7783-20-2 | - | - | - | - | - | - | - | - | - |
627Z | - | - | - | - | - | - | - | - | - |
606 | - | - | - | - | - | - | - | - | - |
4-SKF | SKF | - | - | - | - | - | - | 150 mm | - |
20x27x4mm | - | - | - | - | - | - | - | - | - |
2008 | NSK | - | - | - | - | - | - | - | - |
pcl-200-18b | Nachi | - | - | - | - | - | - | - | - |
1-in | - | - | - | - | - | - | - | - | - |
(KL-GS0201) | - | - | - | - | - | - | - | - | - |
30277 | - | - | - | - | - | - | - | - | - |
P401 | - | - | - | - | - | - | - | - | - |
MAG-33VP | INA | - | - | - | - | - | - | - | - |
180W | - | - | - | - | - | - | - | - | - |
1.6 | - | - | - | - | - | - | - | - | 7 mm |
48 | - | - | - | - | - | - | - | - | - |
VI 140326-V Four Point Contact Slewing Ring Slewing Bearing | Number of pulses per revolution N:64; Period accuracy ±:8 %; Duty cycle tolerance ±:10 %; Limiting speed:300 r/min; Phase shift output signal:90 °; Mass sensor unit:0.58 kg; Cable connector type:AMP Superseal; Phase shift output signal tolerance ±:30 °; Duty cycle:50 %; |
SD.950.20.00.C Four Contact Ball Slewing Ring 736x946x56mm | Pu:2.860 kN; static Cor:62.900 kN; Grease:4 200 min-1; dynamic Cr:30.130 kN; d1:60 mm; D:60 mm; Oil:5 600 min-1; d:40 mm; D1:42 mm; H:13 mm; |
Slewing Bearing RKS.060.20.0944 944mm X 1016mm X 945.5mm | Fatigue load limit Pu:137 kN; D:270 mm; D1 ≈:228 mm; da min.:158 mm; B1:114 mm; Calculation factor e:0.35; Calculation factor Y0:1.8; Basic dynamic load rating C:1129 kN; G1:17 mm; r1,2 min.:3 mm; |
XU080264 Cross Roller Bearing Manufacturer 215.9x311x25.4mm | L:679.45 mm; PosiTrac Plus contact element:2 x B10724-148; A1:180.975 mm; H1:190.5 mm; End plug (suffix Y):EPR 19; Da:319.999 mm; Housing:SSAFS 536; R2:41.275 mm; Cap bolt:1-8 UNC; RG:3/4 NPT; |
CRBA12025 Crossed Roller Bearing (120x180x25mm) Industrial Robots Use | Basic Static Radial Load Rating Co:43000 N; B:33.30 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8500 rpm; Sealed Speed Rating n3:6300 rpm; Grease Speed Rating n1:6300 rpm; D:72.0000 mm; Accessories:Two Shields & Snap-R; d:30.000 mm; Basic Dynamic Radial Load Rating C:46800 N; |
PC300-5 Slewing Bearing | Initial grease fill:232.47 g; N1:22.225 mm; Max. speed for Taconite seal:775 r/min; A1:120.65 mm; R1:67.866 mm; da:93.662 mm; Taconite seal:TER 557; Adapter sleeve assembly:SNW 22x3.11/16; Ca:62.789 mm; R2:31.75 mm; |
VLA200414N Flange Slewing Ring 304x503.3x56mm | Basic Static Radial Load Rating Co:11800 N; Fillet Radius ra:0.64 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Basic Dynamic Radial Load Rating C:14600 N; D:72.0000 mm; d:50.000 mm; B:12.00 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:10000 rpm; Sealed Speed Rating n3:5600 rpm; |
012.60.2800 Slewing Bearing | Shielded or Sealed B1:7.1 mm; Width Plain B:5.6 mm; Oil Speed Rating Open/Shielded n2:38000 rpm; Basic Static Radial Load Rating Co:1340 N; d:9.500 mm; Basic Dynamic Radial Load Rating C:3320 N; Grease Speed Rating Open/Shielded n1:31000 rpm; D:22.2000 mm; Fillet Radius ra:0.41 mm; Sealed Speed Rating n3:21000 rpm; |
MTO-050 Slewing Bearings(50x110x20mm) (1.968x4.331x0.787inch) Without Gear | Threads per inch:8; d3 max.:230.327 mm; B1:163.728 mm; Hydraulic nut:HMVC 36E; d:180 mm; G:179.476 mm; d1:134.938 mm; Sleeve:S 136x5.5/16; Lock washer:W 36; Mass adapter sleeve assembly:10 kg; |
M5-30P1 Angular Contact Ball Slewing Rings | Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Mass bushing:0.019 kg; Specific dynamic load factor K:25 N/mm²; D1:25 mm; Permissible sliding velocity v max.:0.5 m/s; B:10 mm; α:105 °; d:14 mm; Coefficient of friction µ max.:0.15; |
021.30.1200 Slewing Bearing Video