No. | Brand | C | K | A | T | a | G | h | b |
XB9S | NTN | 52.375 mm | - | - | - | - | - | - | - |
32214 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | mm |
ZK04 | - | - | - | - | - | - | - | - | - |
25.4N | - | - | - | - | - | - | - | - | - |
1/2/3 | - | - | - | - | - | - | - | 42.069 mm | - |
1992-1994 | Timken | - | - | - | - | - | - | - | - |
10pcs | - | - | - | - | - | - | - | - | - |
30mm | - | - | - | - | - | - | - | - | - |
TRA5182 | - | - | - | - | - | - | - | - | - |
WA270-7 | - | - | - | - | - | - | - | - | - |
100% | - | - | - | - | - | - | Tr 220x4 | 9 mm | 20 mm |
6007ZZ | - | - | - | - | 34 mm | - | - | - | - |
47 | Danfoss | - | 3.5 mm | - | - | - | - | - | - |
125 | fag | - | - | - | - | - | - | - | - |
CLG925D | - | - | - | - | - | - | M 160x3 | - | - |
10pcs | - | - | - | - | - | - | - | 51.594 mm | - |
B7205 | - | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
440L, | RBC | - | - | - | - | - | - | - | - |
90% | - | - | - | - | - | - | - | - | - |
WBXU-062 | - | - | - | - | - | - | - | - | - |
LB68633R | Rexnord | - | - | - | - | - | - | - | - |
61808-2RS1 | SKF | - | - | - | - | - | - | - | - |
VZ50C13RJAX-10 | DAIKIN | - | - | - | - | - | - | - | - |
16034 | NSK | - | - | - | - | - | - | - | - |
900 | fag | - | - | - | - | - | - | - | - |
20x27x4mm | - | - | - | - | 32.545 mm | - | - | - | - |
12/15/18 | - | - | - | - | - | - | - | - | - |
32% | - | - | - | - | - | - | - | - | - |
21P-25-K1100 Swing Bearing For Komatsu PC180NLC-6K Excavator | d1:237 mm; d:170 mm; B:16.5 mm; r1,2 min.:1.5 mm; Mass shaft washer:2.8 kg; |
VLU201094 Slewing Bearing 984x1198x56mm | Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:134000 N; Oil Speed Rating n2:4500 rpm; Sealed Speed Rating n3:3400 rpm; d:60.000 mm; Basic Static Radial Load Rating Co:143000 N; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; B:54.00 mm; Fillet Radius ra:2.00 mm; |
KLK 1050L Four Point Contact Ball Slewing Turntable Bearing | Sleeve:S 24x4.1/16; B:20.904 mm; Lock washer:W 24; B1:87.782 mm; Hydraulic nut:HMVC 24E; d1:103.188 mm; Lock nut:AN 24; d:120 mm; B4:23.825 mm; Threads per inch:12; |
A16-67P2 Four Point Contact Ball Slewing Bearings SLEWING RINGS | H:287.337 mm; Mass pillow block:69.3 kg; Ca:89.789 mm; R1:79.375 mm; Adapter sleeve assembly:SNW 122x3.7/8; Da:240 mm; P120°:73.8 kN; Cap bolt:2 x 1-8 UNC; Appropriate attachment bolt size G:0.875 in; RG:1/2 NPT; |
6397/2800GK1 Slewing Bearing | Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:415000 N; D:460.0000 mm; Sealed Speed Rating n3:700 rpm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:1100 rpm; Oil Speed Rating Open/Shielded n2:1400 rpm; d:340.000 mm; B:56.00 mm; Basic Dynamic Radial Load Rating C:281000 N; |
1792/1400G Bearing 1400x1780.8x110mm | Accessories:No Shield, no Seal,; d:55.000 mm; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:122000 N; B:49.20 mm; Sealed Speed Rating n3:3800 rpm; Oil Speed Rating n2:5000 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:119000 N; |
122.40.2500 Slewing Bearing | d1 ≈:38.25 mm; B2:8 mm; B1:4 mm; Mass angle ring:0.023 kg; d:25 mm; r3,4 min.:1.1 mm; |
134.45.2000 Slewing Beairng | da min.:137 mm; D1 ≈:175.2 mm; Mass bearing:3.91 kg; r3,4 min.:1.1 mm; Basic dynamic load rating C:165 kN; Reference speed:3800 r/min; d:130 mm; F:148 mm; ra max.:2 mm; da max.:145 mm; |
RB20035UUCC0 High Precision Cross Roller Ring Bearing | d:360 mm; r, r1,2 min.:2.1 mm; Mass inner ring:10.9 kg; F:390 mm; B:80 mm; |
MTE-210X Heavy Duty Slewing Ring Bearing | rb max.:1.5 mm; r1,2 min.:1.5 mm; Calculation factor e:0.31; d:30 mm; ra max.:1.5 mm; D:72 mm; Da max.:65 mm; Calculation factor Y0:1.1; Da min.:59 mm; Basic static load rating C0:85 kN; |
1787/1075GKM Slewing Bearing Video