| No. | Brand | C | K | A | T | a | G | h | b |
| F247 | - | - | - | - | - | - | - | - | - |
| 6310 | fag | - | - | - | - | - | - | - | - |
| R210-7 | - | - | - | - | - | - | - | - | - |
| 22313K | Rollway | - | - | - | - | - | - | - | - |
| 99.6% | - | - | - | - | - | - | - | - | - |
| 6208-ZZC3 | koyo | - | - | - | - | - | - | - | - |
| 5cbm | - | - | - | - | - | - | - | - | - |
| R145LCR | - | - | - | - | - | - | - | - | - |
| 50x | NSK | - | - | - | - | - | - | - | - |
| SY100, | SKF | - | - | - | - | - | - | - | - |
| B-2820 | koyo | - | - | - | - | - | - | - | - |
| 1.5inch | - | 8.5 mm | - | - | - | - | - | - | - |
| EX200-2 | - | - | - | - | - | - | - | - | - |
| KM-466-A | - | - | - | - | - | - | M 25x1.5 | - | - |
| 4FT | - | - | - | - | - | - | - | - | - |
| 6308ZNR | SKF | - | - | - | - | - | - | - | - |
| NH4Cl | - | - | - | - | - | - | - | - | - |
| 23938-S-MB | fag | - | - | - | - | - | - | - | - |
| 6002-2RS | - | - | - | - | - | - | - | - | - |
| 16mm/18mm | - | - | - | - | - | - | M 130x2 | - | - |
| Ex200 | Hitachi | - | - | - | - | - | - | - | - |
| Fd50 | - | - | 12 mm | - | - | - | - | - | 22.3 mm |
| 560x750X140 | - | - | - | 9 mm | - | - | - | - | - |
| 34CrMo4 | - | - | - | 6.5 mm | - | - | Tr 260x4 | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 316 | - | - | - | - | - | - | - | - | - |
| Cross Roller Bearing XR882058 Thrust Tapered Roller Bearing 939.8x1117.6x82.55mm | h:36.513 mm; Ca:42.799 mm; A2:198.438 mm; Taconite seal:TER 54; Cap bolt:2 x 5/8-11 UNC; H2:31.75 mm; P150°:28.5 kN; Da:150 mm; RG:3/8 NPT; J min.:250.825 mm; |
| 2787/1440G Slewing Bearing | d1:400 mm; B:41 mm; r1,2 min.:5 mm; d:200 mm; Mass shaft washer:29.6 kg; |
| CRBA12016 Crossed Roller Bearing (120x150x16mm) Industrial Robots Use | Oil:3 800 min-1; d:70 mm; rs Dynamic (Cr):2.1 mm; B:51 mm; D:150 mm; with tapered bore:2314 ; Pu:37.600 kN; Static (Cor):112.270 kN; with cylindrical bore:4 500 min-1; B1:mm; |
| CRBS1208 High Precision Cross Roller Bearing | Static axial stiffness, preload class C:204 N/µm; Preload class A GA:130 N; Db max.:75.8 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor f2B:1.03; D:80 mm; Calculation factor f:1.08; Attainable speed for grease lubrication:23000 r/min; Basic dynamic load rating C:14.8 kN; r1,2 min.:1 mm; |
| NRXT8016E Crossed Roller Bearing 80x120x16mm | P90°:2900 kN; A1:310 mm; N:50 mm; ba max.:170 mm; Mass housing:301 kg; H:591 mm; H1:300 mm; bb:115.5 mm; Q180°:1430 kN; N1:42 mm; |
| PC200-6(6D102) Komastu Excavator Bearing 20Y-25-21200 | d2 (max):48.1 mm; rs (min):1.1 mm; Dynamic (Ca):31.6 kN; s:1.5 mm; F:44 mm; b:4 mm; d2:35 mm; Pu:3.300 kN; r1s (min):0.6 mm; Static (Coa):27.1 kN; |
| LS40F00003F1 Swing Bearing For KOBELCO SK480LC-6E Excavator | rb max.:1 mm; Reference speed:9000 r/min; Da max.:79.1 mm; da max.:74 mm; E:76.5 mm; ra max.:1 mm; Calculation factor kr:0.12; Axial load factor Y:0.6; Basic dynamic load rating C:69.5 kN; Limiting speed:9500 r/min; |
| NRXT20025 Crossed Roller Bearing 200x260x25mm | Reference speed:5300 r/min; r3,4 min.:3.3 mm; a:27.26 mm; Ca min.:5 mm; rb max.:3.3 mm; Calculation factor Y0:1; Dimension series:4500; C:33.338 mm; Da max.:93 mm; Limiting speed:6300 r/min; |
| SOR10/244 Four Point Contact Slewing Bearing | D:62.0000 mm; Basic Dynamic Radial Load Rating C:21200 N; Basic Static Radial Load Rating Co:10800 N; Oil Speed Rating n2:14000 rpm; Fillet Radius ra:1.00 mm; B:17.00 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Accessories:Shield & Seal; Sealed Speed Rating n3:7500 rpm; d:25.000 mm; |
| Slewing Bearing For Komatsu PC220-7 Excavator |
HS6-29E1Z External Gear Bearing Video